devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Loc Ho <lho-qTEPVZfXA3Y@public.gmane.org>
To: dougthompson-aS9lmoZGLiVWk0Htik3J/w@public.gmane.org,
	bp-Gina5bIWoIWzQB+pC5nmwQ@public.gmane.org,
	mchehab-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org
Cc: linux-edac-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	jcm-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
	patches-qTEPVZfXA3Y@public.gmane.org,
	Loc Ho <lho-qTEPVZfXA3Y@public.gmane.org>
Subject: [PATCH v9 3/5] Documentation: Add documentation for the APM X-Gene SoC EDAC DTS binding
Date: Thu, 14 May 2015 11:05:45 -0600	[thread overview]
Message-ID: <1431623147-4950-4-git-send-email-lho@apm.com> (raw)
In-Reply-To: <1431623147-4950-3-git-send-email-lho-qTEPVZfXA3Y@public.gmane.org>

This patch adds documentation for the APM X-Gene SoC EDAC DTS binding.

Signed-off-by: Loc Ho <lho-qTEPVZfXA3Y@public.gmane.org>
---
 .../devicetree/bindings/edac/apm-xgene-edac.txt    |   74 ++++++++++++++++++++
 1 files changed, 74 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/edac/apm-xgene-edac.txt

diff --git a/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt b/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
new file mode 100644
index 0000000..bd42c53
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
@@ -0,0 +1,74 @@
+* APM X-Gene SoC EDAC node
+
+EDAC node is defined to describe on-chip error detection and correction.
+The follow error types are supported:
+
+  memory controller	- Memory controller
+  PMD (L1/L2)		- Processor module unit (PMD) L1/L2 cache
+
+The following section describes the EDAC DT node binding.
+
+Required properties:
+- compatible		: Shall be "apm,xgene-edac".
+- reg			: First resource shall be the CPU bus (PCP) resource.
+- interrupts            : Interrupt-specifier for MCU, PMD, L3, or SoC error
+			  IRQ(s).
+
+Required properties for memory controller subnode:
+- compatible		: Shall be "apm,xgene-edac-mc".
+- reg			: First resource shall be the memory controller unit
+                          (MCU) resource.
+- regmap-csw		: Regmap of the CPU switch fabric (CSW) resource.
+- regmap-mcba		: Regmap of the MCB-A (memory bridge) resource.
+- regmap-mcbb		: Regmap of the MCB-B (memory bridge) resource.
+
+Required properties for PMD subnode:
+- compatible		: Shall be "apm,xgene-edac-pmd".
+- reg			: First resource shall be the PMD resource.
+- regmap-efuse		: Regmap of the PMD efuse resource.
+
+Example:
+	csw: csw@7e200000 {
+		compatible = "syscon";
+		reg = <0x0 0x7e200000 0x0 0x1000>;
+	};
+
+	mcba: mcba@7e700000 {
+		compatible = "syscon";
+		reg = <0x0 0x7e700000 0x0 0x1000>;
+	};
+
+	mcbb: mcbb@7e720000 {
+		compatible = "syscon";
+		reg = <0x0 0x7e720000 0x0 0x1000>;
+	};
+
+	efuse: efuse@1054a000 {
+		compatible = "syscon";
+		reg = <0x0 0x1054a000 0x0 0x20>;
+	};
+
+	edac: edac@78800000 {
+		compatible = "apm,xgene-edac";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0x78800000 0x0 0x100>;
+		interrupts = <0x0 0x20 0x4>,
+			     <0x0 0x21 0x4>,
+			     <0x0 0x27 0x4>;
+
+		edacmc0: edacmc0@7e800000 {
+			compatible = "apm,xgene-edac-mc";
+			regmap-csw = <&csw>;
+			regmap-mcba = <&mcba>;
+			regmap-mcbb = <&mcbb>;
+			reg = <0x0 0x7e800000 0x0 0x1000>;
+		};
+
+		edacpmd0: edacpmd0@7c000000 {
+			compatible = "apm,xgene-edac-pmd";
+			regmap-efuse = <&efuse>;
+			reg = <0x0 0x7c000000 0x0 0x200000>;
+		};
+
+	};
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-05-14 17:05 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-14 17:05 [PATCH v9 0/4] edac: Add APM X-Gene SoC EDAC driver Loc Ho
     [not found] ` <1431623147-4950-1-git-send-email-lho-qTEPVZfXA3Y@public.gmane.org>
2015-05-14 17:05   ` [PATCH v9 1/5] arm64: Enable EDAC on ARM64 Loc Ho
     [not found]     ` <1431623147-4950-2-git-send-email-lho-qTEPVZfXA3Y@public.gmane.org>
2015-05-14 17:05       ` [PATCH v9 2/5] MAINTAINERS: Add entry for APM X-Gene SoC EDAC driver Loc Ho
     [not found]         ` <1431623147-4950-3-git-send-email-lho-qTEPVZfXA3Y@public.gmane.org>
2015-05-14 17:05           ` Loc Ho [this message]
     [not found]             ` <1431623147-4950-4-git-send-email-lho-qTEPVZfXA3Y@public.gmane.org>
2015-05-14 17:05               ` [PATCH v9 4/5] edac: Add " Loc Ho
     [not found]                 ` <1431623147-4950-5-git-send-email-lho-qTEPVZfXA3Y@public.gmane.org>
2015-05-14 17:05                   ` [PATCH v9 5/5] arm64: Add APM X-Gene SoC EDAC DTS entries Loc Ho
2015-05-15 10:49                   ` [PATCH v9 4/5] edac: Add APM X-Gene SoC EDAC driver Arnd Bergmann
2015-05-15 10:44               ` [PATCH v9 3/5] Documentation: Add documentation for the APM X-Gene SoC EDAC DTS binding Arnd Bergmann
2015-05-16  0:17                 ` Loc Ho

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1431623147-4950-4-git-send-email-lho@apm.com \
    --to=lho-qtepvzfxa3y@public.gmane.org \
    --cc=bp-Gina5bIWoIWzQB+pC5nmwQ@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dougthompson-aS9lmoZGLiVWk0Htik3J/w@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=jcm-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-edac-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=mchehab-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org \
    --cc=patches-qTEPVZfXA3Y@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).