[PATCH v5 3/3] dts: hi6220: enable thermal sensor for hisilicon SoC

[Xinwei Kong <kong.kongxinwei@hisilicon.com>]

From: kongxinwei <kong.kongxinwei@hisilicon.com>

Dts includes two part: the first part is related with thermal sensor;
the second part is related with thermal zones, in this part it will
define the thermal zones and which sensor device should be bound to.
it also need specify the polling interval for every thermal zone.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: kongxinwei <kong.kongxinwei@hisilicon.com>
---
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 127 ++++++++++++++++++++++++++++++
 1 file changed, 127 insertions(+)
 create mode 100644 arch/arm64/boot/dts/hisilicon/hi6220.dtsi

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
new file mode 100644
index 0000000..82f213d
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -0,0 +1,127 @@
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+
+	tsensor: tsensor@0,f7030700 {
+		compatible = "hisilicon,tsensor";
+		reg = <0x0 0xf7030700 0x0 0x1000>;
+		interrupts = <0 7 0x4>;
+		clocks = <&clock_sys HI6220_TSENSOR_CLK>;
+		clock-names = "thermal_clk";
+		#thermal-sensor-cells = <1>;
+
+	thermal-zones {
+		local: local {
+			/* milliseconds */
+			polling-delay-passive = <1000>;
+			/* milliseconds */
+			polling-delay = <5000>;
+
+			/* sensor	ID */
+			thermal-sensors = <&tsensor  0>;
+
+			trips {
+				local_alert: local_alert {
+					/* millicelsius */
+					temperature = <70000>;
+					/* millicelsius */
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				local_crit: local_crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/* There are currently no cooling maps
+				because there are no cooling devices */
+			};
+		};
+
+		cluster1: cluster1 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			/* sensor	ID */
+			thermal-sensors = <&tsensor  1>;
+
+			trips {
+				cluster1_alert: cluster1_alert {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cluster1_crit: cluster1_crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/* There are currently no cooling maps
+				because there are no cooling devices */
+			};
+		};
+
+		cluster0: cluster0 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			/* sensor	ID */
+			thermal-sensors = <&tsensor  2>;
+
+			trips {
+				cluster0_alert: cluster0_alert {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cluster0_crit: cluster0_crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cluster0_alert>;
+					cooling-device =
+					    <&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu: gpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			/* sensor	ID */
+			thermal-sensors = <&tsensor  3>;
+
+			trips {
+				gpu_alert: gpu_alert {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: gpu_crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/* There are currently no cooling maps
+				because there are no cooling devices */
+			};
+		};
+	};
+}
-- 
1.9.1