[RESEND PATCH 1/2] ARM: dts: s3c2416: Add labels to S3C2416 nodes

[RESEND PATCH 1/2] ARM: dts: s3c2416: Add labels to S3C2416 nodes

[Krzysztof Kozlowski]

Add new labels to certain nodes on S3C2416 so they could be easily
referenced by board DTS files.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/s3c2416.dtsi | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index 30b8f7e47454..a5184ff56933 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -17,7 +17,7 @@
 	compatible = "samsung,s3c2416";
 
 	aliases {
-		serial3 = &uart3;
+		serial3 = &uart_3;
 	};
 
 	cpus {
@@ -48,7 +48,7 @@
 		clock-names = "timers";
 	};
 
-	serial@50000000 {
+	uart_0: serial@50000000 {
 		compatible = "samsung,s3c2440-uart";
 		clock-names = "uart", "clk_uart_baud2",
 				"clk_uart_baud3";
@@ -56,7 +56,7 @@
 				<&clocks SCLK_UART>;
 	};
 
-	serial@50004000 {
+	uart_1: serial@50004000 {
 		compatible = "samsung,s3c2440-uart";
 		clock-names = "uart", "clk_uart_baud2",
 				"clk_uart_baud3";
@@ -64,7 +64,7 @@
 				<&clocks SCLK_UART>;
 	};
 
-	serial@50008000 {
+	uart_2: serial@50008000 {
 		compatible = "samsung,s3c2440-uart";
 		clock-names = "uart", "clk_uart_baud2",
 				"clk_uart_baud3";
@@ -72,7 +72,7 @@
 				<&clocks SCLK_UART>;
 	};
 
-	uart3: serial@5000C000 {
+	uart_3: serial@5000C000 {
 		compatible = "samsung,s3c2440-uart";
 		reg = <0x5000C000 0x4000>;
 		interrupts = <1 18 24 4>, <1 18 25 4>;
@@ -83,7 +83,7 @@
 		status = "disabled";
 	};
 
-	sdhci@4AC00000 {
+	sdhci_1: sdhci@4AC00000 {
 		compatible = "samsung,s3c6410-sdhci";
 		reg = <0x4AC00000 0x100>;
 		interrupts = <0 0 21 3>;
@@ -94,7 +94,7 @@
 		status = "disabled";
 	};
 
-	sdhci@4A800000 {
+	sdhci_0: sdhci@4A800000 {
 		compatible = "samsung,s3c6410-sdhci";
 		reg = <0x4A800000 0x100>;
 		interrupts = <0 0 20 3>;
@@ -105,13 +105,13 @@
 		status = "disabled";
 	};
 
-	watchdog@53000000 {
+	watchdog: watchdog@53000000 {
 		interrupts = <1 9 27 3>;
 		clocks = <&clocks PCLK_WDT>;
 		clock-names = "watchdog";
 	};
 
-	rtc@57000000 {
+	rtc: rtc@57000000 {
 		compatible = "samsung,s3c2416-rtc";
 		clocks = <&clocks PCLK_RTC>;
 		clock-names = "rtc";
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[RESEND PATCH 2/2] ARM: dts: s3c2416: Use labels for overriding nodes in SMDK2416

[Krzysztof Kozlowski]

Usage of labels instead of full paths reduces possible mistakes when
overriding nodes.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
---
 arch/arm/boot/dts/s3c2416-smdk2416.dts | 86 +++++++++++++++++-----------------
 1 file changed, 43 insertions(+), 43 deletions(-)

diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index ea92fd69529a..f257926c13b7 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -31,55 +31,55 @@
 			#clock-cells = <0>;
 		};
 	};
+};
 
-	serial@50000000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
-	};
+&rtc {
+	status = "okay";
+};
 
-	serial@50004000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
-	};
+&sdhci_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>,
+			<&sd1_bus1>, <&sd1_bus4>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
 
-	serial@50008000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart2_data>;
-	};
+&sdhci_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>,
+			<&sd0_bus1>, <&sd0_bus4>;
+	bus-width = <4>;
+	cd-gpios = <&gpf 1 0>;
+	cd-inverted;
+	status = "okay";
+};
 
-	serial@5000C000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart3_data>;
-	};
+&uart_0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
+};
 
-	watchdog@53000000 {
-		status = "okay";
-	};
+&uart_1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
+};
 
-	rtc@57000000 {
-		status = "okay";
-	};
+&uart_2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_data>;
+};
 
-	sdhci@4AC00000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk>, <&sd0_cmd>,
-				<&sd0_bus1>, <&sd0_bus4>;
-		bus-width = <4>;
-		cd-gpios = <&gpf 1 0>;
-		cd-inverted;
-		status = "okay";
-	};
+&uart_3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_data>;
+};
 
-	sdhci@4A800000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd1_clk>, <&sd1_cmd>,
-				<&sd1_bus1>, <&sd1_bus4>;
-		bus-width = <4>;
-		broken-cd;
-		status = "okay";
-	};
+&watchdog {
+	status = "okay";
 };
-- 
2.1.4