From: <Frank.Li@freescale.com>
To: lznuaa@gmail.com, shawn.guo@linaro.org,
dmitry.torokhov@gmail.com, robh+dt@kernel.org,
a.zummo@towertech.it, p.zabel@pengutronix.de,
alexandre.belloni@free-electrons.com
Cc: linux-arm-kernel@lists.infradead.org,
linux-input@vger.kernel.org, rtc-linux@googlegroups.com,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
Frank Li <Frank.Li@freescale.com>
Subject: [PATCH v2 4/7] arm: dts: imx: update snvs to use syscon access register
Date: Wed, 20 May 2015 01:04:39 +0800 [thread overview]
Message-ID: <1432055082-28983-5-git-send-email-Frank.Li@freescale.com> (raw)
In-Reply-To: <1432055082-28983-1-git-send-email-Frank.Li@freescale.com>
From: Frank Li <Frank.Li@freescale.com>
snvs is MFP device. Change dts to use syscon to allocate register resource.
Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
arch/arm/boot/dts/imx6qdl.dtsi | 12 ++++--------
arch/arm/boot/dts/imx6sl.dtsi | 12 ++++--------
arch/arm/boot/dts/imx6sx.dtsi | 12 ++++--------
arch/arm/boot/dts/vfxxx.dtsi | 9 +++------
4 files changed, 15 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 0482a66..9df9faf 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -687,21 +687,17 @@
};
snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
- snvs_rtc: snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
<0 20 IRQ_TYPE_LEVEL_HIGH>;
};
- snvs_poweroff: snvs-poweroff@38 {
+ snvs_poweroff: snvs-poweroff {
compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index a78e715..99f37f9 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -564,21 +564,17 @@
};
snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
- snvs_rtc: snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
<0 20 IRQ_TYPE_LEVEL_HIGH>;
};
- snvs_poweroff: snvs-poweroff@38 {
+ snvs_poweroff: snvs-poweroff {
compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 708175d..97de407 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -662,20 +662,16 @@
};
snvs: snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
- snvs_rtc: snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
- snvs_poweroff: snvs-poweroff@38 {
+ snvs_poweroff: snvs-poweroff {
compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 4aa3351..fccfc01 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -404,14 +404,11 @@
};
snvs0: snvs@400a7000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x400a7000 0x2000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x400a7000 0x2000>;
- snvsrtc: snvs-rtc-lp@34 {
+ snvsrtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SNVS>;
clock-names = "snvs-rtc";
--
1.9.1
next prev parent reply other threads:[~2015-05-19 17:04 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-19 17:04 [PATCH v2 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver Frank.Li
2015-05-19 17:04 ` [PATCH v2 1/7] arm: imx: power-off: change to syscon to access register Frank.Li
[not found] ` <1432055082-28983-1-git-send-email-Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-05-19 17:04 ` [PATCH v2 2/7] rtc: arm: imx: snvs: change use " Frank.Li-KZfg59tc24xl57MIdRCFDg
2015-05-19 20:46 ` Alexandre Belloni
2015-05-19 17:04 ` [PATCH v2 3/7] Document: dt: fsl: snvs: change support syscon Frank.Li
2015-05-19 17:04 ` Frank.Li [this message]
2015-05-19 17:04 ` [PATCH v2 5/7] input: keyboard: imx: add snvs power key driver Frank.Li
2015-05-19 17:04 ` [PATCH v2 6/7] document: devicetree: input: imx: i.mx snvs power device tree bindings Frank.Li
2015-05-19 17:04 ` [PATCH v2 7/7] arm: dts: imx6sx: enable snvs power key Frank.Li
2015-05-20 1:58 ` [PATCH v2 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver Shawn Guo
2015-05-20 2:44 ` Zhi Li
2015-05-20 14:22 ` Shawn Guo
2015-05-20 14:30 ` Zhi Li
[not found] ` <CAHrpEqSpeMO=zLyii8qZUznP+9EAQqJ-D3O8hbXj99m+UNvpzA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-20 14:46 ` Joshua Clayton
2015-05-20 15:03 ` Zhi Li
2015-05-20 18:25 ` Russell King - ARM Linux
[not found] ` <20150520182540.GQ2067-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2015-05-20 18:30 ` Russell King - ARM Linux
[not found] ` <20150520183050.GR2067-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2015-05-20 18:44 ` Zhi Li
2015-05-20 21:56 ` Russell King - ARM Linux
2015-05-21 0:20 ` Dmitry Torokhov
2015-05-21 1:16 ` Zhi Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432055082-28983-5-git-send-email-Frank.Li@freescale.com \
--to=frank.li@freescale.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@free-electrons.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lznuaa@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=rtc-linux@googlegroups.com \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).