devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
	Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Subject: [PATCH 1/3] arm64: dts: mt8173: Add clock controller device nodes
Date: Wed, 20 May 2015 15:32:44 +0200	[thread overview]
Message-ID: <1432128766-4445-2-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1432128766-4445-1-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>

This adds the device nodes providing clocks on the Mediatek MT8173.
These are: topckgen, infracfg, pericfg and apmixedsys. These are
fed by two oscillators also added by this patch.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Reviewed-by: Daniel Kurtz <djkurtz-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi | 41 ++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 4595196..ef1d92f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -11,6 +11,7 @@
  * GNU General Public License for more details.
  */
 
+#include <dt-bindings/clock/mt8173-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include "mt8173-pinfunc.h"
@@ -87,6 +88,20 @@
 		#clock-cells = <0>;
 	};
 
+	clk26m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator@1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "clk32k";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
@@ -106,6 +121,26 @@
 		compatible = "simple-bus";
 		ranges;
 
+		topckgen: clock-controller@10000000 {
+			compatible = "mediatek,mt8173-topckgen";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: power-controller@10001000 {
+			compatible = "mediatek,mt8173-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: power-controller@10003000 {
+			compatible = "mediatek,mt8173-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		/*
 		 * Pinctrl access register at 0x10005000 through regmap.
 		 * Register 0x1000b000 is used by EINT.
@@ -138,6 +173,12 @@
 			reg = <0 0x10200620 0 0x20>;
 		};
 
+		apmixedsys: clock-controller@10209000 {
+			compatible = "mediatek,mt8173-apmixedsys";
+			reg = <0 0x10209000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		gic: interrupt-controller@10220000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-05-20 13:32 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-20 13:32 [PATCH v2] arm64: dts: Mediatek: MT8173 updates Sascha Hauer
     [not found] ` <1432128766-4445-1-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-05-20 13:32   ` Sascha Hauer [this message]
     [not found]     ` <1432128766-4445-2-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-05-27 11:45       ` [PATCH 1/3] arm64: dts: mt8173: Add clock controller device nodes Matthias Brugger
2015-06-23 19:36       ` Matthias Brugger
2015-05-20 13:32   ` [PATCH 2/3] arm64: dts: mt8173: Use real clock for UARTs Sascha Hauer
     [not found]     ` <1432128766-4445-3-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-05-27 11:45       ` Matthias Brugger
2015-06-23 19:36       ` Matthias Brugger
2015-05-20 13:32   ` [PATCH 3/3] arm64: dts: mt8173: Add PMIC wrapper device node Sascha Hauer
     [not found]     ` <1432128766-4445-4-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-05-27 11:46       ` Matthias Brugger
2015-06-23 19:37       ` Matthias Brugger
  -- strict thread matches above, loose matches on Subject: below --
2015-05-19 10:53 ARM64: dts: Mediatek: MT8173 updates Sascha Hauer
     [not found] ` <1432032824-7955-1-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-05-19 10:53   ` [PATCH 1/3] ARM64: dts: mt8173: Add clock controller device nodes Sascha Hauer
     [not found]     ` <1432032824-7955-2-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-05-20  8:44       ` Daniel Kurtz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1432128766-4445-2-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer-bicnvbalz9megne8c9+irq@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).