From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gary Bisson Subject: [PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Date: Fri, 22 May 2015 19:14:25 +0200 Message-ID: <1432314867-30888-1-git-send-email-gary.bisson@boundarydevices.com> Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org, eric.nelson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org, Gary Bisson List-Id: devicetree@vger.kernel.org This series adds the Okaya 7" LCD display that is a WVGA (800x480) panel with a 18-bit parallel interface for both Nitrogen and Sabrelite. A U-Boot script to configure the displays based on detection of the touch controller is available for reference here: https://github.com/boundarydevices/u-boot-imx6/blob/staging/board/boundary/nitrogen6x/6x_bootscript-mainline.txt Gary Bisson (2): ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD display ARM: dts: imx6qdl-sabrelite: add Okaya LCD display arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 70 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 70 +++++++++++++++++++++++++++++++ 2 files changed, 140 insertions(+) -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html