From: <dinguyen@opensource.altera.com>
To: robh+dt@kernel.org, ijc+devicetree@hellion.org.uk,
galak@codeaurora.org, mark.rutland@arm.com, pawel.moll@arm.com
Cc: devicetree@vger.kernel.org,
Dinh Nguyen <dinguyen@opensource.altera.com>,
dinh.linux@gmail.com, linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: socfpga: dts: enable ethernet for Arria10 devkit
Date: Tue, 26 May 2015 11:06:15 -0500 [thread overview]
Message-ID: <1432656375-26950-1-git-send-email-dinguyen@opensource.altera.com> (raw)
From: Dinh Nguyen <dinguyen@opensource.altera.com>
Update the arria10 gmac nodes with all the necessary properties for ethernet
to function on the Arria10 devkit.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
arch/arm/boot/dts/socfpga_arria10.dtsi | 11 +++++++++++
arch/arm/boot/dts/socfpga_arria10_socdk.dtsi | 28 ++++++++++++++++++++++++++++
2 files changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 6ceb26e..f5bebdd 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -397,6 +397,7 @@
gmac0: ethernet@ff800000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x44 0>;
reg = <0xff800000 0x2000>;
interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
@@ -404,11 +405,16 @@
mac-address = [00 00 00 00 00 00];
snps,multicast-filter-bins = <256>;
snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <16384>;
+ clocks = <&l4_mp_clk>;
+ clock-names = "stmmaceth";
status = "disabled";
};
gmac1: ethernet@ff802000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x48 0>;
reg = <0xff802000 0x2000>;
interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
@@ -418,11 +424,14 @@
snps,perfect-filter-entries = <128>;
tx-fifo-depth = <4096>;
rx-fifo-depth = <16384>;
+ clocks = <&l4_mp_clk>;
+ clock-names = "stmmaceth";
status = "disabled";
};
gmac2: ethernet@ff804000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x4C 0>;
reg = <0xff804000 0x2000>;
interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
@@ -432,6 +441,8 @@
snps,perfect-filter-entries = <128>;
tx-fifo-depth = <4096>;
rx-fifo-depth = <16384>;
+ clocks = <&l4_mp_clk>;
+ clock-names = "stmmaceth";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index 347ca4e..94a0709 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -41,6 +41,34 @@
};
};
+&gmac0 {
+ phy-mode = "rgmii";
+ phy-addr = <0xffffffff>; /* probe for phy addr */
+
+ /*
+ * These skews assume the user's FPGA design is adding 600ps of delay
+ * for TX_CLK on Arria 10.
+ *
+ * All skews are offset since hardware skew values for the ksz9031
+ * range from a negative skew to a positive skew.
+ * See the micrel-ksz90x1.txt Documentation file for details.
+ */
+ txd0-skew-ps = <0>; /* -420ps */
+ txd1-skew-ps = <0>; /* -420ps */
+ txd2-skew-ps = <0>; /* -420ps */
+ txd3-skew-ps = <0>; /* -420ps */
+ rxd0-skew-ps = <420>; /* 0ps */
+ rxd1-skew-ps = <420>; /* 0ps */
+ rxd2-skew-ps = <420>; /* 0ps */
+ rxd3-skew-ps = <420>; /* 0ps */
+ txen-skew-ps = <0>; /* -420ps */
+ txc-skew-ps = <1860>; /* 960ps */
+ rxdv-skew-ps = <420>; /* 0ps */
+ rxc-skew-ps = <1680>; /* 780ps */
+ max-frame-size = <3800>;
+ status = "okay";
+};
+
&uart1 {
status = "okay";
};
--
2.2.1
reply other threads:[~2015-05-26 16:06 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432656375-26950-1-git-send-email-dinguyen@opensource.altera.com \
--to=dinguyen@opensource.altera.com \
--cc=devicetree@vger.kernel.org \
--cc=dinh.linux@gmail.com \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).