From: Bintian Wang <bintian.wang@huawei.com>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, catalin.marinas@arm.com,
will.deacon@arm.com, devicetree@vger.kernel.org,
robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
khilman@linaro.org, mturquette@linaro.org,
rob.herring@linaro.org, zhangfei.gao@linaro.org,
haojian.zhuang@linaro.org, xuwei5@hisilicon.com,
jh80.chung@samsung.com, olof@lixom.net, yanhaifeng@gmail.com,
sboyd@codeaurora.org, xuejiancheng@huawei.com,
sledge.yanwei@huawei.com, tomeu.vizoso@collabora.com,
linux@arm.linux.org.uk, guodong.xu@linaro.org,
jorge.ramirez-ortiz@linaro.org, tyler.baker@linaro.org,
khilman@kernel.org, pebolle@tiscali.nl, arnd@arndb.de,
marc.zyngier@arm.com
Cc: xuyiping@hisilicon.com, wangbinghui@hisilicon.com,
zhenwei.wang@hisilicon.com, victor.lixin@hisilicon.com,
puck.chen@hisilicon.com, dan.zhao@hisilicon.com,
huxinwei@huawei.com, bintian.wang@huawei.com,
z.liuxinliang@huawei.com, heyunlei@huawei.com,
kong.kongxinwei@hisilicon.com, wangbintian@gmail.com,
w.f@huawei.com, liguozhu@hisilicon.com
Subject: [PATCH v8 5/7] dt-bindings: Add header file of hi6220 clock driver
Date: Fri, 29 May 2015 10:08:37 +0800 [thread overview]
Message-ID: <1432865319-20413-6-git-send-email-bintian.wang@huawei.com> (raw)
In-Reply-To: <1432865319-20413-1-git-send-email-bintian.wang@huawei.com>
Add the header file "hi6220-clock.h" used by both
hi6220 clock driver and hi6220 device tree file.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Bintian Wang <bintian.wang@huawei.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Tyler Baker <tyler.baker@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
---
include/dt-bindings/clock/hi6220-clock.h | 173 +++++++++++++++++++++++++++++++
1 file changed, 173 insertions(+)
create mode 100644 include/dt-bindings/clock/hi6220-clock.h
diff --git a/include/dt-bindings/clock/hi6220-clock.h b/include/dt-bindings/clock/hi6220-clock.h
new file mode 100644
index 0000000..70ee383
--- /dev/null
+++ b/include/dt-bindings/clock/hi6220-clock.h
@@ -0,0 +1,173 @@
+/*
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * Author: Bintian Wang <bintian.wang@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_HI6220_H
+#define __DT_BINDINGS_CLOCK_HI6220_H
+
+/* clk in Hi6220 AO (always on) controller */
+#define HI6220_NONE_CLOCK 0
+
+/* fixed rate clocks */
+#define HI6220_REF32K 1
+#define HI6220_CLK_TCXO 2
+#define HI6220_MMC1_PAD 3
+#define HI6220_MMC2_PAD 4
+#define HI6220_MMC0_PAD 5
+#define HI6220_PLL_BBP 6
+#define HI6220_PLL_GPU 7
+#define HI6220_PLL1_DDR 8
+#define HI6220_PLL_SYS 9
+#define HI6220_PLL_SYS_MEDIA 10
+#define HI6220_DDR_SRC 11
+#define HI6220_PLL_MEDIA 12
+#define HI6220_PLL_DDR 13
+
+/* fixed factor clocks */
+#define HI6220_300M 14
+#define HI6220_150M 15
+#define HI6220_PICOPHY_SRC 16
+#define HI6220_MMC0_SRC_SEL 17
+#define HI6220_MMC1_SRC_SEL 18
+#define HI6220_MMC2_SRC_SEL 19
+#define HI6220_VPU_CODEC 20
+#define HI6220_MMC0_SMP 21
+#define HI6220_MMC1_SMP 22
+#define HI6220_MMC2_SMP 23
+
+/* gate clocks */
+#define HI6220_WDT0_PCLK 24
+#define HI6220_WDT1_PCLK 25
+#define HI6220_WDT2_PCLK 26
+#define HI6220_TIMER0_PCLK 27
+#define HI6220_TIMER1_PCLK 28
+#define HI6220_TIMER2_PCLK 29
+#define HI6220_TIMER3_PCLK 30
+#define HI6220_TIMER4_PCLK 31
+#define HI6220_TIMER5_PCLK 32
+#define HI6220_TIMER6_PCLK 33
+#define HI6220_TIMER7_PCLK 34
+#define HI6220_TIMER8_PCLK 35
+#define HI6220_UART0_PCLK 36
+
+#define HI6220_AO_NR_CLKS 37
+
+/* clk in Hi6220 systrl */
+/* gate clock */
+#define HI6220_MMC0_CLK 1
+#define HI6220_MMC0_CIUCLK 2
+#define HI6220_MMC1_CLK 3
+#define HI6220_MMC1_CIUCLK 4
+#define HI6220_MMC2_CLK 5
+#define HI6220_MMC2_CIUCLK 6
+#define HI6220_USBOTG_HCLK 7
+#define HI6220_CLK_PICOPHY 8
+#define HI6220_HIFI 9
+#define HI6220_DACODEC_PCLK 10
+#define HI6220_EDMAC_ACLK 11
+#define HI6220_CS_ATB 12
+#define HI6220_I2C0_CLK 13
+#define HI6220_I2C1_CLK 14
+#define HI6220_I2C2_CLK 15
+#define HI6220_I2C3_CLK 16
+#define HI6220_UART1_PCLK 17
+#define HI6220_UART2_PCLK 18
+#define HI6220_UART3_PCLK 19
+#define HI6220_UART4_PCLK 20
+#define HI6220_SPI_CLK 21
+#define HI6220_TSENSOR_CLK 22
+#define HI6220_MMU_CLK 23
+#define HI6220_HIFI_SEL 24
+#define HI6220_MMC0_SYSPLL 25
+#define HI6220_MMC1_SYSPLL 26
+#define HI6220_MMC2_SYSPLL 27
+#define HI6220_MMC0_SEL 28
+#define HI6220_MMC1_SEL 29
+#define HI6220_BBPPLL_SEL 30
+#define HI6220_MEDIA_PLL_SRC 31
+#define HI6220_MMC2_SEL 32
+#define HI6220_CS_ATB_SYSPLL 33
+
+/* mux clocks */
+#define HI6220_MMC0_SRC 34
+#define HI6220_MMC0_SMP_IN 35
+#define HI6220_MMC1_SRC 36
+#define HI6220_MMC1_SMP_IN 37
+#define HI6220_MMC2_SRC 38
+#define HI6220_MMC2_SMP_IN 39
+#define HI6220_HIFI_SRC 40
+#define HI6220_UART1_SRC 41
+#define HI6220_UART2_SRC 42
+#define HI6220_UART3_SRC 43
+#define HI6220_UART4_SRC 44
+#define HI6220_MMC0_MUX0 45
+#define HI6220_MMC1_MUX0 46
+#define HI6220_MMC2_MUX0 47
+#define HI6220_MMC0_MUX1 48
+#define HI6220_MMC1_MUX1 49
+#define HI6220_MMC2_MUX1 50
+
+/* divider clocks */
+#define HI6220_CLK_BUS 51
+#define HI6220_MMC0_DIV 52
+#define HI6220_MMC1_DIV 53
+#define HI6220_MMC2_DIV 54
+#define HI6220_HIFI_DIV 55
+#define HI6220_BBPPLL0_DIV 56
+#define HI6220_CS_DAPB 57
+#define HI6220_CS_ATB_DIV 58
+
+#define HI6220_SYS_NR_CLKS 59
+
+/* clk in Hi6220 media controller */
+/* gate clocks */
+#define HI6220_DSI_PCLK 1
+#define HI6220_G3D_PCLK 2
+#define HI6220_ACLK_CODEC_VPU 3
+#define HI6220_ISP_SCLK 4
+#define HI6220_ADE_CORE 5
+#define HI6220_MED_MMU 6
+#define HI6220_CFG_CSI4PHY 7
+#define HI6220_CFG_CSI2PHY 8
+#define HI6220_ISP_SCLK_GATE 9
+#define HI6220_ISP_SCLK_GATE1 10
+#define HI6220_ADE_CORE_GATE 11
+#define HI6220_CODEC_VPU_GATE 12
+#define HI6220_MED_SYSPLL 13
+
+/* mux clocks */
+#define HI6220_1440_1200 14
+#define HI6220_1000_1200 15
+#define HI6220_1000_1440 16
+
+/* divider clocks */
+#define HI6220_CODEC_JPEG 17
+#define HI6220_ISP_SCLK_SRC 18
+#define HI6220_ISP_SCLK1 19
+#define HI6220_ADE_CORE_SRC 20
+#define HI6220_ADE_PIX_SRC 21
+#define HI6220_G3D_CLK 22
+#define HI6220_CODEC_VPU_SRC 23
+
+#define HI6220_MEDIA_NR_CLKS 24
+
+/* clk in Hi6220 power controller */
+/* gate clocks */
+#define HI6220_PLL_GPU_GATE 1
+#define HI6220_PLL1_DDR_GATE 2
+#define HI6220_PLL_DDR_GATE 3
+#define HI6220_PLL_MEDIA_GATE 4
+#define HI6220_PLL0_BBP_GATE 5
+
+/* divider clocks */
+#define HI6220_DDRC_SRC 6
+#define HI6220_DDRC_AXI1 7
+
+#define HI6220_POWER_NR_CLKS 8
+#endif
--
1.9.1
next prev parent reply other threads:[~2015-05-29 2:08 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-29 2:08 [PATCH v8 0/7] arm64,hi6220: Enable Hisilicon Hi6220 SoC Bintian Wang
2015-05-29 2:08 ` Bintian Wang [this message]
[not found] ` <1432865319-20413-1-git-send-email-bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-05-29 2:08 ` [PATCH v8 1/7] arm64: hi6220: Document devicetree bindings for Hisilicon hi6220 SoC Bintian Wang
2015-05-29 2:08 ` [PATCH v8 2/7] clk: hi6220: Document devicetree bindings for hi6220 clock Bintian Wang
[not found] ` <1432865319-20413-3-git-send-email-bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-06-03 16:31 ` Michael Turquette
2015-05-29 2:08 ` [PATCH v8 3/7] Documentation: DT: PL011: hi6220: add compatible string for Hisilicon designed UART Bintian Wang
2015-05-29 2:08 ` [PATCH v8 4/7] clk: hisilicon: Remove __init for marking function prototypes Bintian Wang
2015-05-29 2:08 ` [PATCH v8 6/7] clk: hi6220: Clock driver support for Hisilicon hi6220 SoC Bintian Wang
[not found] ` <1432865319-20413-7-git-send-email-bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-06-03 22:39 ` Michael Turquette
2015-06-04 0:46 ` Bintian
2015-05-29 2:08 ` [PATCH v8 7/7] arm64: dts: Add dts files for Hisilicon Hi6220 SoC Bintian Wang
2015-05-29 23:00 ` [PATCH v8 0/7] arm64,hi6220: Enable " Kevin Hilman
[not found] ` <7hwpzrdm5i.fsf-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
2015-05-30 0:37 ` Bintian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432865319-20413-6-git-send-email-bintian.wang@huawei.com \
--to=bintian.wang@huawei.com \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=dan.zhao@hisilicon.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=guodong.xu@linaro.org \
--cc=haojian.zhuang@linaro.org \
--cc=heyunlei@huawei.com \
--cc=huxinwei@huawei.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jh80.chung@samsung.com \
--cc=jorge.ramirez-ortiz@linaro.org \
--cc=khilman@kernel.org \
--cc=khilman@linaro.org \
--cc=kong.kongxinwei@hisilicon.com \
--cc=liguozhu@hisilicon.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=mturquette@linaro.org \
--cc=olof@lixom.net \
--cc=pawel.moll@arm.com \
--cc=pebolle@tiscali.nl \
--cc=puck.chen@hisilicon.com \
--cc=rob.herring@linaro.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=sledge.yanwei@huawei.com \
--cc=tomeu.vizoso@collabora.com \
--cc=tyler.baker@linaro.org \
--cc=victor.lixin@hisilicon.com \
--cc=w.f@huawei.com \
--cc=wangbinghui@hisilicon.com \
--cc=wangbintian@gmail.com \
--cc=will.deacon@arm.com \
--cc=xuejiancheng@huawei.com \
--cc=xuwei5@hisilicon.com \
--cc=xuyiping@hisilicon.com \
--cc=yanhaifeng@gmail.com \
--cc=z.liuxinliang@huawei.com \
--cc=zhangfei.gao@linaro.org \
--cc=zhenwei.wang@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).