From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: [PATCH v3 1/6] dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings Date: Fri, 29 May 2015 11:38:41 -0500 Message-ID: <1432917526-9688-2-git-send-email-robh@kernel.org> References: <1432917526-9688-1-git-send-email-robh@kernel.org> Return-path: In-Reply-To: <1432917526-9688-1-git-send-email-robh@kernel.org> Sender: linux-kernel-owner@vger.kernel.org To: Greg Kroah-Hartman , Peter Chen , Kishon Vijay Abraham I Cc: linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Arnd Bergmann , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala List-Id: devicetree@vger.kernel.org Add PHY binding for Marvell PXA1928 SOC's USB and HSIC PHYs. Signed-off-by: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: devicetree@vger.kernel.org --- .../devicetree/bindings/phy/pxa1928-usb-phy.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt diff --git a/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt new file mode 100644 index 0000000..660a13c --- /dev/null +++ b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt @@ -0,0 +1,18 @@ +* Marvell PXA1928 USB and HSIC PHYs + +Required properties: +- compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy" +- reg: base address and length of the registers +- clocks - A single clock. From common clock binding. +- #phys-cells: should be 0. From commmon phy binding. +- resets: reference to the reset controller + +Example: + + usbphy: phy@7000 { + compatible = "marvell,pxa1928-usb-phy"; + reg = <0x7000 0xe0>; + clocks = <&apmu_clocks PXA1928_CLK_USB>; + #phy-cells = <0>; + }; + -- 2.1.0