From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Mike Turquette
<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH 1/2] clk: sunxi: Add support for the usb-clk on sun8i a23 and a33 SoCs
Date: Mon, 1 Jun 2015 20:23:27 +0200 [thread overview]
Message-ID: <1433183008-13086-1-git-send-email-hdegoede@redhat.com> (raw)
The usb-clk on sun8i a23 and a33 SoCs is similar to the ones found
on sun6i-a31 SoCs but instead of a 3th phy the a23 / a33 have a hsic
interface which gets enabled by almost the same bits as used on
the a31 for the 3th phy, but not exactly the same bits so we need
a new compatible for this.
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
drivers/clk/sunxi/clk-usb.c | 11 +++++++++++
2 files changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index 4fa11af..8a47b77 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -67,6 +67,7 @@ Required properties:
"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
"allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
"allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
+ "allwinner,sun8i-a23-usb-clk" - for usb gates + resets on A23
"allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
"allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
diff --git a/drivers/clk/sunxi/clk-usb.c b/drivers/clk/sunxi/clk-usb.c
index a86ed2f..3a25f95 100644
--- a/drivers/clk/sunxi/clk-usb.c
+++ b/drivers/clk/sunxi/clk-usb.c
@@ -204,6 +204,17 @@ static void __init sun6i_a31_usb_setup(struct device_node *node)
}
CLK_OF_DECLARE(sun6i_a31_usb, "allwinner,sun6i-a31-usb-clk", sun6i_a31_usb_setup);
+static const struct usb_clk_data sun8i_a23_usb_clk_data __initconst = {
+ .clk_mask = BIT(16) | BIT(11) | BIT(10) | BIT(9) | BIT(8),
+ .reset_mask = BIT(2) | BIT(1) | BIT(0),
+};
+
+static void __init sun8i_a23_usb_setup(struct device_node *node)
+{
+ sunxi_usb_clk_setup(node, &sun8i_a23_usb_clk_data, &sun4i_a10_usb_lock);
+}
+CLK_OF_DECLARE(sun8i_a23_usb, "allwinner,sun8i-a23-usb-clk", sun8i_a23_usb_setup);
+
static const struct usb_clk_data sun9i_a80_usb_mod_data __initconst = {
.clk_mask = BIT(6) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1),
.reset_mask = BIT(19) | BIT(18) | BIT(17),
--
2.4.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2015-06-01 18:23 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-01 18:23 Hans de Goede [this message]
[not found] ` <1433183008-13086-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-06-01 18:23 ` [PATCH 2/2] ARM: dts: sun8i: Add usb_clk node for a23/a33 Hans de Goede
[not found] ` <1433183008-13086-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-06-02 2:01 ` Chen-Yu Tsai
2015-06-02 8:27 ` Maxime Ripard
2015-06-01 23:39 ` [PATCH 1/2] clk: sunxi: Add support for the usb-clk on sun8i a23 and a33 SoCs Julian Calaby
2015-06-02 1:57 ` Chen-Yu Tsai
2015-06-02 8:24 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433183008-13086-1-git-send-email-hdegoede@redhat.com \
--to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).