From: Javier Martinez Canillas <javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
To: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>,
Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Bill Richardson
<wfrichar-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Simon Glass <sjg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
Gwendal Grignou <gwendal-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
Stephen Barber <smbarber-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Filipe Brandenburger
<filbranden-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
Todd Broch <tbroch-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Alexandru M Stan <amstan-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
Javier Martinez Canillas
<javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
Subject: [PATCH v4 7/8] mfd: cros_ec: spi: Add a DT property to delay asserting the CS
Date: Tue, 2 Jun 2015 10:11:10 +0200 [thread overview]
Message-ID: <1433232671-27679-8-git-send-email-javier.martinez@collabora.co.uk> (raw)
In-Reply-To: <1433232671-27679-1-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
From: Alexandru M Stan <amstan-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Some ECs need a little time for waking up before they can accept
SPI data at a high speed. Add a "google,cros-ec-spi-pre-delay"
property to the DT binding to configure this.
If this property isn't set, then no delay will be added. However,
if set it will cause a delay equal to the value passed to it to
be inserted at the beginning of a transaction.
Signed-off-by: Alexandru M Stan <amstan-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Reviewed-by: Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
Tested-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
Changes since v3:
- Split DT binding and driver change as suggested by Lee Jones.
- Add tested-by tag from Heiko Stuebner
- Add acked-by tag from Lee Jones.
Changes since v2: None
Changes since v1: None, new patch
---
Documentation/devicetree/bindings/mfd/cros-ec.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt
index 8009c3d87f33..1777916e9e28 100644
--- a/Documentation/devicetree/bindings/mfd/cros-ec.txt
+++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt
@@ -18,6 +18,10 @@ Required properties (SPI):
- reg: SPI chip select
Optional properties (SPI):
+- google,cros-ec-spi-pre-delay: Some implementations of the EC need a little
+ time to wake up from sleep before they can receive SPI transfers at a high
+ clock rate. This property specifies the delay, in usecs, between the
+ assertion of the CS to the start of the first clock pulse.
- google,cros-ec-spi-msg-delay: Some implementations of the EC require some
additional processing time in order to accept new transactions. If the delay
between transactions is not long enough the EC may not be able to respond
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-06-02 8:11 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-02 8:11 [PATCH v4 0/8] mfd: cros_ec: Add multi EC and proto v3 support Javier Martinez Canillas
2015-06-02 8:11 ` [PATCH v4 1/8] mfd: cros_ec: Use a zero-length array for command data Javier Martinez Canillas
2015-06-02 8:11 ` [PATCH v4 2/8] mfd: cros_ec: rev cros_ec_commands.h Javier Martinez Canillas
2015-06-02 8:11 ` [PATCH v4 3/8] mfd: cros_ec: Move protocol helpers out of the MFD driver Javier Martinez Canillas
2015-06-02 8:11 ` [PATCH v4 4/8] mfd: cros_ec: add proto v3 skeleton Javier Martinez Canillas
[not found] ` <1433232671-27679-1-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2015-06-02 8:11 ` [PATCH v4 5/8] mfd: cros_ec: add bus-specific proto v3 code Javier Martinez Canillas
2015-06-02 8:11 ` [PATCH v4 6/8] mfd: cros_ec: Support multiple EC in a system Javier Martinez Canillas
2015-06-03 8:53 ` Lee Jones
2015-06-03 10:12 ` Javier Martinez Canillas
2015-06-03 11:27 ` Lee Jones
2015-06-03 11:49 ` Javier Martinez Canillas
2015-06-02 8:11 ` Javier Martinez Canillas [this message]
2015-06-02 8:11 ` [PATCH v4 8/8] mfd: cros_ec: spi: Add delay for asserting CS Javier Martinez Canillas
2015-06-02 21:15 ` [PATCH v4 0/8] mfd: cros_ec: Add multi EC and proto v3 support Heiko Stübner
2015-06-03 6:45 ` Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433232671-27679-8-git-send-email-javier.martinez@collabora.co.uk \
--to=javier.martinez-zgy8ohtn/8ppycu2f3hruq@public.gmane.org \
--cc=amstan-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=filbranden-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=gwendal-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=sjg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=smbarber-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=tbroch-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=wfrichar-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).