[PATCH 2/7] phy-sun4i-usb: Add support for the usb-phys on the sun8i-a23 SoC

[Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]

The usb-phys on the sun8i-a23 SoC have the same setup wrt clocks as on the
sun6i-a31 SoC, but there are only 2 instead of 3 like on the sun5i-a13 SoC.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt | 2 ++
 drivers/phy/phy-sun4i-usb.c                             | 7 +++++--
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
index 557fa99..f0c640a 100644
--- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
@@ -7,6 +7,7 @@ Required properties:
   * allwinner,sun5i-a13-usb-phy
   * allwinner,sun6i-a31-usb-phy
   * allwinner,sun7i-a20-usb-phy
+  * allwinner,sun8i-a23-usb-phy
 - reg : a list of offset + length pairs
 - reg-names :
   * "phy_ctrl"
@@ -17,6 +18,7 @@ Required properties:
 - clock-names :
   * "usb_phy" for sun4i, sun5i or sun7i
   * "usb0_phy", "usb1_phy" and "usb2_phy" for sun6i
+  * "usb0_phy", "usb1_phy" for sun8i
 - resets : a list of phandle + reset specifier pairs
 - reset-names :
   * "usb0_reset"
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 0df1c4f..7d96414 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -432,7 +432,8 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 	data->extcon.supported_cable = data->extcon_cable_names;
 	data->extcon.dev.parent = dev;
 
-	if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy"))
+	if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy") ||
+	    of_device_is_compatible(np, "allwinner,sun8i-a23-usb-phy"))
 		data->num_phys = 2;
 	else
 		data->num_phys = 3;
@@ -443,7 +444,8 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 	else
 		data->disc_thresh = 3;
 
-	if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy"))
+	if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy") ||
+	    of_device_is_compatible(np, "allwinner,sun8i-a23-usb-phy"))
 		dedicated_clocks = true;
 	else
 		dedicated_clocks = false;
@@ -583,6 +585,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun5i-a13-usb-phy" },
 	{ .compatible = "allwinner,sun6i-a31-usb-phy" },
 	{ .compatible = "allwinner,sun7i-a20-usb-phy" },
+	{ .compatible = "allwinner,sun8i-a23-usb-phy" },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
-- 
2.4.2