From: Daniel Thompson <daniel.thompson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Mike Turquette
<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: Daniel Thompson
<daniel.thompson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Maxime Coquelin
<mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Kamil Lulko <rev13-5tc4TXWwyLM@public.gmane.org>,
Andreas Farber <afaerber-l3A5Bk7waGM@public.gmane.org>,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
linaro-kernel-cunTk1MwBs8s++Sfvej+rw@public.gmane.org
Subject: [PATCH v3 1/3] dt-bindings: Document the STM32F4 clock bindings
Date: Wed, 10 Jun 2015 21:09:36 +0100 [thread overview]
Message-ID: <1433966978-24422-2-git-send-email-daniel.thompson@linaro.org> (raw)
In-Reply-To: <1433966978-24422-1-git-send-email-daniel.thompson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
This adds documentation of device tree bindings for the clock related
portions of the STM32 RCC block.
Signed-off-by: Daniel Thompson <daniel.thompson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
.../devicetree/bindings/clock/st,stm32-rcc.txt | 65 ++++++++++++++++++++++
1 file changed, 65 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
new file mode 100644
index 0000000..fee3205
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
@@ -0,0 +1,65 @@
+STMicroelectronics STM32 Reset and Clock Controller
+===================================================
+
+The RCC IP is both a reset and a clock controller. This documentation only
+describes the clock part.
+
+Please also refer to clock-bindings.txt in this directory for common clock
+controller binding usage.
+
+Required properties:
+- compatible: Should be "st,stm32f42xx-rcc"
+- reg: should be register base and length as documented in the
+ datasheet
+- #clock-cells: 2, device nodes should specify the clock in their "clocks"
+ property, containing a phandle to the clock device node, an index selecting
+ between gated clocks and other clocks and an index specifying the clock to
+ use.
+
+Example:
+
+ rcc: rcc@40023800 {
+ #clock-cells = <2>
+ compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
+ reg = <0x40023800 0x400>;
+ };
+
+Specifying gated clocks
+=======================
+
+The primary index must be set to 0.
+
+The secondary index is the bit number within the RCC register bank, starting
+from the first RCC clock enable register (RCC_AHB1ENR, address offset 0x30).
+
+It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+Where bit_offset is the bit offset within the register (LSB is 0, MSB is 31).
+
+Example:
+
+ /* Gated clock, AHB1 bit 0 (GPIOA) */
+ ... {
+ clocks = <&rcc 0 0>
+ };
+
+ /* Gated clock, AHB2 bit 4 (CRYP) */
+ ... {
+ clocks = <&rcc 0 36>
+ };
+
+Specifying other clocks
+=======================
+
+The primary index must be set to 1.
+
+The secondary index is bound with the following magic numbers:
+
+ 0 SYSTICK
+ 1 FCLK
+
+Example:
+
+ /* Misc clock, FCLK */
+ ... {
+ clocks = <&rcc 1 1>
+ };
--
2.4.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-06-10 20:09 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-22 20:41 [RFC PATCH 0/3] clk: stm32: Add clock driver for STM32F4[23]xxx devices Daniel Thompson
[not found] ` <1432327273-6810-1-git-send-email-daniel.thompson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-05-22 20:41 ` [RFC PATCH 1/3] dt-bindings: Document the STM32F4 clock bindings Daniel Thompson
2015-05-30 7:54 ` [PATCH v2 0/4] clk: stm32: Add clock driver for STM32F4[23]xxx devices Daniel Thompson
2015-05-30 7:54 ` [PATCH v2 1/4] ARM: stm32: Enable clock source Daniel Thompson
[not found] ` <1432972448-10332-1-git-send-email-daniel.thompson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-05-30 7:54 ` [PATCH v2 2/4] dt-bindings: Document the STM32F4 clock bindings Daniel Thompson
[not found] ` <1432972448-10332-3-git-send-email-daniel.thompson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-05-30 9:21 ` Maxime Coquelin
[not found] ` <55698104.2070205-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-06-01 7:46 ` Daniel Thompson
2015-05-30 7:54 ` [PATCH v2 3/4] clk: stm32: Add clock driver for STM32F4[23]xxx devices Daniel Thompson
2015-05-30 9:15 ` Maxime Coquelin
[not found] ` <55697FCE.9040003-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-06-01 7:18 ` Daniel Thompson
2015-05-30 7:54 ` [PATCH v2 4/4] ARM: dts: stm32f429: Adopt STM32F4 clock driver Daniel Thompson
2015-05-30 9:38 ` Maxime Coquelin
2015-05-30 8:40 ` [PATCH v2 0/4] clk: stm32: Add clock driver for STM32F4[23]xxx devices Maxime Coquelin
2015-06-10 20:09 ` [PATCH v3 0/3] " Daniel Thompson
[not found] ` <1433966978-24422-1-git-send-email-daniel.thompson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-06-10 20:09 ` Daniel Thompson [this message]
2015-06-12 7:25 ` [PATCH v3 1/3] dt-bindings: Document the STM32F4 clock bindings Maxime Coquelin
2015-06-22 22:47 ` Stephen Boyd
2015-06-10 20:09 ` [PATCH v3 2/3] clk: stm32: Add clock driver for STM32F4[23]xxx devices Daniel Thompson
2015-06-22 22:48 ` Stephen Boyd
[not found] ` <1433966978-24422-3-git-send-email-daniel.thompson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-06-22 23:21 ` Stephen Boyd
[not found] ` <20150622232114.GK22132-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2015-06-23 8:25 ` Daniel Thompson
2015-06-10 20:09 ` [PATCH v3 3/3] ARM: dts: stm32f429: Adopt STM32F4 clock driver Daniel Thompson
2015-07-07 9:38 ` Maxime Coquelin
2015-06-22 22:48 ` [PATCH v3 0/3] clk: stm32: Add clock driver for STM32F4[23]xxx devices Stephen Boyd
[not found] ` <20150622224832.GI22132-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2015-06-23 8:22 ` Daniel Thompson
2015-06-23 9:24 ` Maxime Coquelin
2015-05-22 20:41 ` [RFC PATCH 2/3] " Daniel Thompson
2015-06-04 22:07 ` Stephen Boyd
2015-06-05 9:36 ` Daniel Thompson
2015-06-06 0:10 ` Stephen Boyd
2015-05-22 20:41 ` [RFC PATCH 3/3] ARM: dts: stm32f429: Adopt STM32F4 clock driver Daniel Thompson
2015-05-26 16:41 ` [RFC PATCH 0/3] clk: stm32: Add clock driver for STM32F4[23]xxx devices Maxime Coquelin
[not found] ` <CALszF6BTu_8SCE9hEiLYuvQg8J9eG5xktaVV7_LvnG3r20+wtw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-27 8:36 ` Daniel Thompson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433966978-24422-2-git-send-email-daniel.thompson@linaro.org \
--to=daniel.thompson-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=afaerber-l3A5Bk7waGM@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=linaro-kernel-cunTk1MwBs8s++Sfvej+rw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=rev13-5tc4TXWwyLM@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).