From mboxrd@z Thu Jan 1 00:00:00 1970 From: Boris Brezillon Subject: [PATCH v4 11/14] crypto: marvell/CESA: add allhwsupport module parameter Date: Thu, 11 Jun 2015 19:36:40 +0200 Message-ID: <1434044206-10459-22-git-send-email-boris.brezillon@free-electrons.com> References: <1434044206-10459-1-git-send-email-boris.brezillon@free-electrons.com> Return-path: In-Reply-To: <1434044206-10459-1-git-send-email-boris.brezillon@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org To: Herbert Xu , "David S. Miller" , linux-crypto@vger.kernel.org Cc: Boris Brezillon , Arnaud Ebalard , Tawfik Bayouk , Lior Amsalem , Nadav Haklai , Eran Ben-Avi , Thomas Petazzoni , Gregory CLEMENT , Jason Cooper , Sebastian Hesselbarth , Andrew Lunn , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Jason Gunthorpe , Imre Kaloz List-Id: devicetree@vger.kernel.org The old and new marvell CESA drivers both support Orion and Kirkwood SoCs. Add a module parameter to choose whether these SoCs should be attached to the new or the old driver. The default policy is to keep attaching those IPs to the old driver if it is enabled, until we decide the new CESA driver is stable/secure enough. Signed-off-by: Boris Brezillon --- drivers/crypto/marvell/cesa.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/crypto/marvell/cesa.c b/drivers/crypto/marvell/cesa.c index 087370e..c7e25a0 100644 --- a/drivers/crypto/marvell/cesa.c +++ b/drivers/crypto/marvell/cesa.c @@ -31,6 +31,10 @@ #include "cesa.h" +static int allhwsupport = !IS_ENABLED(CONFIG_CRYPTO_DEV_MV_CESA); +module_param_named(allhwsupport, allhwsupport, int, 0444); +MODULE_PARM_DESC(allhwsupport, "Enable support for all hardware (even it if overlaps with the mv_cesa driver)"); + struct mv_cesa_dev *cesa_dev; static void mv_cesa_dequeue_req_unlocked(struct mv_cesa_engine *engine) -- 1.9.1