From mboxrd@z Thu Jan 1 00:00:00 1970 From: Punnaiah Choudary Kalluri Subject: [PATCH v3 1/2] Documentation: dt: Add Xilinx zynqmp dma device tree binding documentation Date: Tue, 16 Jun 2015 08:04:42 +0530 Message-ID: <1434422083-8653-1-git-send-email-punnaia@xilinx.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, pawel.moll-5wv7dgnIgG8@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org, galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org, soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org, vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org, dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org Cc: dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, kalluripunnaiahchoudary-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, kpc528-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, Punnaiah Choudary Kalluri List-Id: devicetree@vger.kernel.org Device-tree binding documentation for Xilinx zynqmp dma engine used in Zynq UltraScale+ MPSoC. Signed-off-by: Punnaiah Choudary Kalluri --- Changes in v3: - None Changes in v2: - None --- .../devicetree/bindings/dma/xilinx/zynqmp_dma.txt | 61 ++++++++++++++++++++ 1 files changed, 61 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt diff --git a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt new file mode 100644 index 0000000..e4f92b9 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt @@ -0,0 +1,61 @@ +Xilinx ZynqMP DMA engine, it does support memory to memory transfers, +memory to device and device to memory transfers. It also has flow +control and rate control support for slave/peripheral dma access. + +Required properties: +- compatible: Should be "xlnx,zynqmp-dma-1.0" +- #dma-cells: Should be <1>, a single cell holding a line request number +- reg: Memory map for module access +- interrupt-parent: Interrupt controller the interrupt is routed through +- interrupts: Should contain DMA channel interrupt +- xlnx,bus-width: AXI buswidth in bits. Should contain 128 or 64 + +Optional properties: +- xlnx,include-sg: Indicates the controller to operate in simple or scatter + gather dma mode +- xlnx,ratectrl: Scheduling interval in terms of clock cycles for + source AXI transaction +- xlnx,overfetch: Tells whether the channel is allowed to over fetch the data +- xlnx,src-issue: Number of AXI outstanding transactions on source side +- xlnx,desc-axi-cohrnt: Tells whether the AXI transactions generated for the + descriptor read are marked Non-coherent +- xlnx,src-axi-cohrnt: Tells whether the AXI transactions generated for the + source descriptor payload are marked Non-coherent +- xlnx,dst-axi-cohrnt: Tells whether the AXI transactions generated for the + dst descriptor payload are marked Non-coherent +- xlnx,desc-axi-qos: AXI QOS bits to be used for descriptor fetch +- xlnx,src-axi-qos: AXI QOS bits to be used for data read +- xlnx,dst-axi-qos: AXI QOS bits to be used for data write +- xlnx,desc-axi-cache: AXI cache bits to be used for descriptor fetch. +- xlnx,desc-axi-cache: AXI cache bits to be used for data read +- xlnx,desc-axi-cache: AXI cache bits to be used for data write +- xlnx,src-burst-len: AXI length for data read. Support only power of 2 values + i.e 1,2,4,8 and 16 +- xlnx,dst-burst-len: AXI length for data write. Support only power of 2 values + i.e 1,2,4,8 and 16 + +Example: +++++++++ +fpd_dma_chan1: dma@FD500000 { + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xFD500000 0x1000>; + #dma_cells = <1>; + interrupt-parent = <&gic>; + interrupts = <0 117 4>; + xlnx,bus-width = <128>; + xlnx,include-sg; + xlnx,overfetch; + xlnx,ratectrl = <0>; + xlnx,src-issue = <16>; + xlnx,desc-axi-cohrnt; + xlnx,src-axi-cohrnt; + xlnx,dst-axi-cohrnt; + xlnx,desc-axi-qos = <0>; + xlnx,desc-axi-cache = <0>; + xlnx,src-axi-qos = <0>; + xlnx,src-axi-cache = <2>; + xlnx,dst-axi-qos = <0>; + xlnx,dst-axi-cache = <2>; + xlnx,src-burst-len = <4>; + xlnx,dst-burst-len = <4>; +}; -- 1.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html