From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
To: agross@codeaurora.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: [PATCH 4/4] ARM: dts: qcom-pm8941: Add charger node
Date: Thu, 18 Jun 2015 14:13:45 -0700 [thread overview]
Message-ID: <1434662025-9485-5-git-send-email-bjorn.andersson@sonymobile.com> (raw)
In-Reply-To: <1434662025-9485-1-git-send-email-bjorn.andersson@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
arch/arm/boot/dts/qcom-pm8941.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index aa774e685018..6063c7ddda0f 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -26,6 +26,27 @@
bias-pull-up;
};
+ charger@1000 {
+ compatible = "qcom,pm8941-charger";
+ reg = <0x1000 0x700>;
+ interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "chg-done",
+ "chg-fast",
+ "chg-trkl",
+ "bat-temp-ok",
+ "bat-present",
+ "chg-gone",
+ "usb-valid",
+ "dc-valid";
+ };
+
pm8941_gpios: gpios@c000 {
compatible = "qcom,pm8941-gpio";
reg = <0xc000 0x2400>;
--
1.8.2.2
prev parent reply other threads:[~2015-06-18 21:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-18 21:13 [PATCH 0/4] Qualcomm Switch-Mode Battery Charger and Boost Bjorn Andersson
2015-06-18 21:13 ` [PATCH 2/4] dt-binding: power: Add Qualcomm SMBB binding Bjorn Andersson
2015-06-18 21:13 ` Bjorn Andersson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434662025-9485-5-git-send-email-bjorn.andersson@sonymobile.com \
--to=bjorn.andersson@sonymobile.com \
--cc=agross@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).