From: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>
To: dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org,
computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: sebastian-E0PNVn5OA6ohrxcnuTQ+TQ@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
marb-Z4QKGCRq86k@public.gmane.org,
aaron-yuhzfaV+M/Wz3Dx2OeFgIA@public.gmane.org,
bpringlemeir-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>,
Bill Pringlemeir
<bpringlemeir-ygJ1pmMJ17cAvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v6 3/6] mtd: nand: vf610_nfc: add device tree bindings
Date: Fri, 19 Jun 2015 00:58:36 +0200 [thread overview]
Message-ID: <1434668319-6651-4-git-send-email-stefan@agner.ch> (raw)
In-Reply-To: <1434668319-6651-1-git-send-email-stefan-XLVq0VzYD2Y@public.gmane.org>
Signed-off-by: Bill Pringlemeir <bpringlemeir-ygJ1pmMJ17cAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>
---
.../devicetree/bindings/mtd/vf610-nfc.txt | 45 ++++++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/vf610-nfc.txt
diff --git a/Documentation/devicetree/bindings/mtd/vf610-nfc.txt b/Documentation/devicetree/bindings/mtd/vf610-nfc.txt
new file mode 100644
index 0000000..cae5f25
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/vf610-nfc.txt
@@ -0,0 +1,45 @@
+Freescale's NAND flash controller (NFC)
+
+This variant of the Freescale NAND flash controller (NFC) can be found on
+Vybrid (vf610), MPC5125, MCF54418 and Kinetis K70.
+
+Required properties:
+- compatible: Should be set to "fsl,vf610-nfc"
+- reg: address range of the NFC
+- interrupts: interrupt of the NFC
+- nand-bus-width: see nand.txt
+- nand-ecc-mode: see nand.txt
+- nand-on-flash-bbt: see nand.txt
+- assigned-clocks: main clock from the SoC, for Vybrid <&clks VF610_CLK_NFC>;
+- assigned-clock-rates: The NAND bus timing is derived from this clock
+ rate and should not exceed maximum timing for any NAND memory chip
+ in a board stuffing. Typical NAND memory timings derived from this
+ clock are found in the SoC hardware reference manual. Furthermore,
+ there might be restrictions on maximum rates when using hardware ECC.
+
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+ representing partitions.
+
+Required properties for hardware ECC:
+- nand-ecc-strength: supported strengths are 24 and 32 bit (see nand.txt)
+- nand-ecc-step-size: step size equals page size, currently only 2k pages are
+ supported
+
+Example:
+
+ nfc: nand@400e0000 {
+ compatible = "fsl,vf610-nfc";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x400e0000 0x4000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_NFC>;
+ clock-names = "nfc";
+ assigned-clocks = <&clks VF610_CLK_NFC>;
+ assigned-clock-rates = <33000000>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <32>;
+ nand-ecc-step-size = <2048>;
+ nand-on-flash-bbt;
+ };
--
2.4.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-06-18 22:58 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-18 22:58 [PATCH v6 0/6] mtd: nand: vf610_nfc: Freescale NFC for VF610 Stefan Agner
[not found] ` <1434668319-6651-1-git-send-email-stefan-XLVq0VzYD2Y@public.gmane.org>
2015-06-18 22:58 ` [PATCH v6 1/6] mtd: nand: vf610_nfc: Freescale NFC for VF610, MPC5125 and others Stefan Agner
2015-06-18 22:58 ` [PATCH v6 2/6] mtd: nand: vf610_nfc: add hardware BCH-ECC support Stefan Agner
2015-06-18 22:58 ` Stefan Agner [this message]
2015-06-18 22:58 ` [PATCH v6 5/6] ARM: dts: vf610twr: add NAND flash controller peripherial Stefan Agner
2015-06-18 22:58 ` [PATCH v6 6/6] ARM: dts: vf-colibri: enable NAND flash controller Stefan Agner
2015-06-18 22:58 ` [PATCH v6 4/6] ARM: vf610: enable NAND Flash Controller Stefan Agner
2015-07-08 9:38 ` Shawn Guo
2015-07-08 14:32 ` Bill Pringlemeir
[not found] ` <BLU436-SMTP255283C042EDEF59D9BA0CFB8910-MsuGFMq8XAE@public.gmane.org>
2015-07-08 22:31 ` Sebastian Andrzej Siewior
2015-07-09 1:55 ` Shawn Guo
2015-07-09 15:21 ` Stefan Agner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434668319-6651-4-git-send-email-stefan@agner.ch \
--to=stefan-xlvq0vzyd2y@public.gmane.org \
--cc=aaron-yuhzfaV+M/Wz3Dx2OeFgIA@public.gmane.org \
--cc=boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=bpringlemeir-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=bpringlemeir-ygJ1pmMJ17cAvxtiuMwx3w@public.gmane.org \
--cc=computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=marb-Z4QKGCRq86k@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sebastian-E0PNVn5OA6ohrxcnuTQ+TQ@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).