From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kishon Vijay Abraham I Subject: [PATCH 04/17] phy: omap-usb2: use omap_usb_power_off to power off the PHY during probe Date: Tue, 23 Jun 2015 17:28:49 +0530 Message-ID: <1435060743-5511-5-git-send-email-kishon@ti.com> References: <1435060743-5511-1-git-send-email-kishon@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1435060743-5511-1-git-send-email-kishon@ti.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: bcousson@baylibre.com, tony@atomide.com, balbi@ti.com, rogerq@ti.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org, kishon@ti.com Cc: mark.rutland@arm.com, linux@arm.linux.org.uk, pawel.moll@arm.com, ijc+devicetree@hellion.org.uk, gregkh@linuxfoundation.org, nsekhar@ti.com, robh+dt@kernel.org, galak@codeaurora.org List-Id: devicetree@vger.kernel.org No functional change. Previously omap_control_phy_power() was used to power off the PHY during probe. But once phy-omap-usb2 driver is adapted to use syscon, omap_control_phy_power() cannot be used. Hence used omap_usb_power_off to power off the PHY. Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-omap-usb2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index c1a4686..b5c266a 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -241,7 +241,6 @@ static int omap_usb2_probe(struct platform_device *pdev) } phy->control_dev = &control_pdev->dev; - omap_control_phy_power(phy->control_dev, 0); otg->set_host = omap_usb_set_host; otg->set_peripheral = omap_usb_set_peripheral; @@ -261,6 +260,7 @@ static int omap_usb2_probe(struct platform_device *pdev) } phy_set_drvdata(generic_phy, phy); + omap_usb_power_off(generic_phy); phy_provider = devm_of_phy_provider_register(phy->dev, of_phy_simple_xlate); -- 1.7.9.5