devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>,
	Grant Likely <grant.likely@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	linux-sh@vger.kernel.org, linux-gpio@vger.kernel.org,
	devicetree@vger.kernel.org,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH] pinctrl: sh-pfc: Convert to platform_get_*()
Date: Thu, 25 Jun 2015 11:39:53 +0200	[thread overview]
Message-ID: <1435225193-10078-1-git-send-email-geert+renesas@glider.be> (raw)

If the pin function controller (which can be a GPIO controller) is
instantiated before the interrupt controllers, due to the ordering in
the DTS, the irq domains for the interrupt controllers referenced by its
"interrupts-extended" property cannot be found yet:

    irq: no irq domain found for /interrupt-controller@e61c0000 !

As the sh-pfc driver accesses the platform device's resources directly,
it cannot find the (optional) IRQ resources, and thinks no interrupts
are available. This may lead to failures later, when GPIOs are used as
interupts:

    gpio-keys keyboard: Unable to claim irq 0; error -22
    gpio-keys: probe of keyboard failed with error -22

To fix this, add support for deferred probing to sh-pfc, by converting
the driver from direct platform device resource access to using the
platform_get_resource() and platform_get_irq() helpers.

Note that while this fixes the root cause worked around by commit
e4ba0a9bddff3ba5 ("ARM: shmobile: r8a73a4: Move pfc node to work around
probe ordering bug"), I strongly recommend against reverting the
workaround now, as this would lead to lots of probe deferrals in drivers
relying on pinctrl. This may be reconsidered once the DT code starts
taking into account phandle dependencies during device instantation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
This patch is against next-20150625

"[PATCH] [RFC] OF: probe order dependency aware of_platform_populate"
(https://www.marc.info/?l=devicetree&m=141873189825553&w=1) is a first
step, but it doesn't postpone the instantiation of the pfc.

Tested:
  - r8a73a4/ape6evm (with pfc before/after irqc in DT),
  - sh73a0/kzm9g (with pfc before/after intc-irqpin in DT).

Regression-tested:
  - r8a7791/koelsch (pfc doesn't have interrupts),
  - r8a7740/armadillo (pfc after intc-irqpin in DT),
  - r8a7740/armadillo-legacy (gpio-keys wired to pfc),
  - sh73a0/kzm9g-legacy (gpio-keys not wired to pfc).

Compile-tested:
  - sh/se7724_defconfig.
---
 drivers/pinctrl/sh-pfc/core.c | 46 ++++++++++++++++++++-----------------------
 1 file changed, 21 insertions(+), 25 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/core.c b/drivers/pinctrl/sh-pfc/core.c
index 865d235612c5200a..9796238959047508 100644
--- a/drivers/pinctrl/sh-pfc/core.c
+++ b/drivers/pinctrl/sh-pfc/core.c
@@ -29,24 +29,25 @@
 static int sh_pfc_map_resources(struct sh_pfc *pfc,
 				struct platform_device *pdev)
 {
-	unsigned int num_windows = 0;
-	unsigned int num_irqs = 0;
+	unsigned int num_windows, num_irqs;
 	struct sh_pfc_window *windows;
 	unsigned int *irqs = NULL;
 	struct resource *res;
 	unsigned int i;
+	int irq;
 
 	/* Count the MEM and IRQ resources. */
-	for (i = 0; i < pdev->num_resources; ++i) {
-		switch (resource_type(&pdev->resource[i])) {
-		case IORESOURCE_MEM:
-			num_windows++;
+	for (num_windows = 0;; num_windows++) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, num_windows);
+		if (!res)
 			break;
-
-		case IORESOURCE_IRQ:
-			num_irqs++;
+	}
+	for (num_irqs = 0;; num_irqs++) {
+		irq = platform_get_irq(pdev, num_irqs);
+		if (irq == -EPROBE_DEFER)
+			return irq;
+		if (irq < 0)
 			break;
-		}
 	}
 
 	if (num_windows == 0)
@@ -72,22 +73,17 @@ static int sh_pfc_map_resources(struct sh_pfc *pfc,
 	}
 
 	/* Fill them. */
-	for (i = 0, res = pdev->resource; i < pdev->num_resources; i++, res++) {
-		switch (resource_type(res)) {
-		case IORESOURCE_MEM:
-			windows->phys = res->start;
-			windows->size = resource_size(res);
-			windows->virt = devm_ioremap_resource(pfc->dev, res);
-			if (IS_ERR(windows->virt))
-				return -ENOMEM;
-			windows++;
-			break;
-
-		case IORESOURCE_IRQ:
-			*irqs++ = res->start;
-			break;
-		}
+	for (i = 0; i < num_windows; i++) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		windows->phys = res->start;
+		windows->size = resource_size(res);
+		windows->virt = devm_ioremap_resource(pfc->dev, res);
+		if (IS_ERR(windows->virt))
+			return -ENOMEM;
+		windows++;
 	}
+	for (i = 0; i < num_irqs; i++)
+		*irqs++ = platform_get_irq(pdev, i);
 
 	return 0;
 }
-- 
1.9.1


             reply	other threads:[~2015-06-25  9:39 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-25  9:39 Geert Uytterhoeven [this message]
2015-07-16  8:37 ` [PATCH] pinctrl: sh-pfc: Convert to platform_get_*() Linus Walleij
2015-07-16  8:41 ` Laurent Pinchart
2015-07-16  9:00   ` Geert Uytterhoeven
     [not found] ` <1435225193-10078-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2015-07-16  9:08   ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1435225193-10078-1-git-send-email-geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=devicetree@vger.kernel.org \
    --cc=grant.likely@linaro.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=pantelis.antoniou@konsulko.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).