devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
To: Matthias Brugger
	<matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Mike Turquette
	<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
	Daniel Kurtz <djkurtz-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
	Ricky Liang <jcliang-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Subject: [PATCH v2 4/4] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS
Date: Tue, 30 Jun 2015 10:58:47 +0800	[thread overview]
Message-ID: <1435633127-31952-5-git-send-email-jamesjj.liao@mediatek.com> (raw)
In-Reply-To: <1435633127-31952-1-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>

Add REF2USB_TX clock support into MT8173 APMIXEDSYS. This clock
is needed by USB 3.0.

Signed-off-by: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
 drivers/clk/mediatek/clk-mt8173.c      | 143 +++++++++++++++++++++++++++++++++
 drivers/clk/mediatek/clk-pll.c         |   7 +-
 include/dt-bindings/clock/mt8173-clk.h |   3 +-
 3 files changed, 146 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
index 75be757..333b6af 100644
--- a/drivers/clk/mediatek/clk-mt8173.c
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -12,6 +12,7 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/delay.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/slab.h>
@@ -968,6 +969,141 @@ static void __init mtk_pericfg_init(struct device_node *node)
 }
 CLK_OF_DECLARE(mtk_pericfg, "mediatek,mt8173-pericfg", mtk_pericfg_init);
 
+#define REF2USB_TX_EN		BIT(0)
+#define REF2USB_TX_LPF_EN	BIT(1)
+#define REF2USB_TX_OUT_EN	BIT(2)
+#define REF2USB_EN_MASK		(REF2USB_TX_EN | REF2USB_TX_LPF_EN | \
+				 REF2USB_TX_OUT_EN)
+
+struct mtk_ref2usb_tx {
+	struct clk_hw	hw;
+	void __iomem	*base_addr;
+};
+
+static inline struct mtk_ref2usb_tx *to_mtk_ref2usb_tx(struct clk_hw *hw)
+{
+	return container_of(hw, struct mtk_ref2usb_tx, hw);
+}
+
+static int mtk_ref2usb_tx_is_prepared(struct clk_hw *hw)
+{
+	struct mtk_ref2usb_tx *tx = to_mtk_ref2usb_tx(hw);
+
+	return (readl(tx->base_addr) & REF2USB_EN_MASK) == REF2USB_EN_MASK;
+}
+
+static int mtk_ref2usb_tx_prepare(struct clk_hw *hw)
+{
+	struct mtk_ref2usb_tx *tx = to_mtk_ref2usb_tx(hw);
+	u32 val;
+
+	val = readl(tx->base_addr);
+
+	val |= REF2USB_TX_EN;
+	writel(val, tx->base_addr);
+	udelay(100);
+
+	val |= REF2USB_TX_LPF_EN;
+	writel(val, tx->base_addr);
+
+	val |= REF2USB_TX_OUT_EN;
+	writel(val, tx->base_addr);
+
+	return 0;
+}
+
+static void mtk_ref2usb_tx_unprepare(struct clk_hw *hw)
+{
+	struct mtk_ref2usb_tx *tx = to_mtk_ref2usb_tx(hw);
+	u32 val;
+
+	val = readl(tx->base_addr);
+	val &= ~REF2USB_EN_MASK;
+	writel(val, tx->base_addr);
+}
+
+static const struct clk_ops mtk_ref2usb_tx_ops = {
+	.is_prepared	= mtk_ref2usb_tx_is_prepared,
+	.prepare	= mtk_ref2usb_tx_prepare,
+	.unprepare	= mtk_ref2usb_tx_unprepare,
+};
+
+static struct clk *mtk_clk_register_ref2usb_tx(const char *name,
+			const char *parent_name, void __iomem *reg)
+{
+	struct mtk_ref2usb_tx *tx;
+	struct clk_init_data init = {};
+	struct clk *clk;
+
+	tx = kzalloc(sizeof(*tx), GFP_KERNEL);
+	if (!tx)
+		return ERR_PTR(-ENOMEM);
+
+	tx->base_addr = reg;
+	tx->hw.init = &init;
+
+	init.name = name;
+	init.ops = &mtk_ref2usb_tx_ops;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clk = clk_register(NULL, &tx->hw);
+
+	if (IS_ERR(clk)) {
+		pr_err("Failed to register clk %s: %ld\n", name, PTR_ERR(clk));
+		kfree(tx);
+	}
+
+	return clk;
+}
+
+struct mtk_apmixed_ex {
+	int id;
+	const char *name;
+	const char *parent;
+	u32 reg_ofs;
+};
+
+#define APMIXED_EX(_id, _name, _parent, _reg_ofs) {			\
+		.id = _id,						\
+		.name = _name,						\
+		.parent = _parent,					\
+		.reg_ofs = _reg_ofs,					\
+	}
+
+static const struct mtk_apmixed_ex apmixed_ex[] = {
+	APMIXED_EX(CLK_APMIXED_REF2USB_TX, "ref2usb_tx", "clk26m", 0x8),
+};
+
+static void __init mtk_clk_register_apmixedsys_special(struct device_node *node,
+			struct clk_onecell_data *clk_data)
+{
+	void __iomem *base;
+	struct clk *clk;
+	int i;
+
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("%s(): ioremap failed\n", __func__);
+		return;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(apmixed_ex); i++) {
+		const struct mtk_apmixed_ex *ape = &apmixed_ex[i];
+
+		clk = mtk_clk_register_ref2usb_tx(ape->name, ape->parent,
+							base + ape->reg_ofs);
+
+		if (IS_ERR(clk)) {
+			pr_err("Failed to register clk %s: %ld\n", ape->name,
+					PTR_ERR(clk));
+			continue;
+		}
+
+		clk_data->clks[CLK_APMIXED_REF2USB_TX] = clk;
+	}
+}
+
 #define MT8173_PLL_FMAX		(3000UL * MHZ)
 
 #define CON0_MT8173_RST_BAR	BIT(24)
@@ -1010,12 +1146,19 @@ static const struct mtk_pll_data plls[] = {
 static void __init mtk_apmixedsys_init(struct device_node *node)
 {
 	struct clk_onecell_data *clk_data;
+	int r;
 
 	mt8173_pll_clk_data = clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
 	if (!clk_data)
 		return;
 
 	mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
+	mtk_clk_register_apmixedsys_special(node, clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+			__func__, r);
 
 	mtk_clk_enable_critical();
 }
diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index 44409e9..813f0c7 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -302,7 +302,7 @@ void __init mtk_clk_register_plls(struct device_node *node,
 		const struct mtk_pll_data *plls, int num_plls, struct clk_onecell_data *clk_data)
 {
 	void __iomem *base;
-	int r, i;
+	int i;
 	struct clk *clk;
 
 	base = of_iomap(node, 0);
@@ -324,9 +324,4 @@ void __init mtk_clk_register_plls(struct device_node *node,
 
 		clk_data->clks[pll->id] = clk;
 	}
-
-	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-	if (r)
-		pr_err("%s(): could not register clock provider: %d\n",
-			__func__, r);
 }
diff --git a/include/dt-bindings/clock/mt8173-clk.h b/include/dt-bindings/clock/mt8173-clk.h
index 6ce88bf..7b7c555 100644
--- a/include/dt-bindings/clock/mt8173-clk.h
+++ b/include/dt-bindings/clock/mt8173-clk.h
@@ -172,7 +172,8 @@
 #define CLK_APMIXED_APLL2		12
 #define CLK_APMIXED_LVDSPLL		13
 #define CLK_APMIXED_MSDCPLL2		14
-#define CLK_APMIXED_NR_CLK		15
+#define CLK_APMIXED_REF2USB_TX		15
+#define CLK_APMIXED_NR_CLK		16
 
 /* INFRA_SYS */
 
-- 
1.8.1.1.dirty

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-06-30  2:58 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-30  2:58 [PATCH v2 0/4] Add Mediatek MT8173 subsystem clocks support James Liao
     [not found] ` <1435633127-31952-1-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-06-30  2:58   ` [PATCH v2 1/4] clk: mediatek: mt8173: Fix enabling of critical clocks James Liao
     [not found]     ` <1435633127-31952-2-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-07-01 14:21       ` Daniel Kurtz
     [not found]         ` <CAGS+omDqSEn_WnUYz0XmeRpejhthb0J_qa4H9VEfihtA0Axorg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-07-02  2:07           ` Daniel Kurtz
2015-07-02  2:18           ` James Liao
2015-07-02 23:03       ` Stephen Boyd
     [not found]         ` <20150702230300.GO4301-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2015-07-03  6:29           ` Daniel Kurtz
     [not found]             ` <CAGS+omCwxLNha7EJ2nZ1++E-D5G1d-oRmh1C=m3OQWtbX0SH4w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-07-06 22:52               ` Stephen Boyd
2015-06-30  2:58   ` [PATCH v2 3/4] clk: mediatek: Add subsystem clocks of MT8173 James Liao
     [not found]     ` <1435633127-31952-4-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-07-01 14:54       ` Daniel Kurtz
2015-07-03  5:15         ` James Liao
2015-07-03  6:08           ` Daniel Kurtz
2015-06-30  2:58   ` James Liao [this message]
2015-07-01 15:22     ` [PATCH v2 4/4] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS Daniel Kurtz
2015-07-01 15:22       ` Daniel Kurtz
     [not found]         ` <CAGS+omBsu3zkBf0C_QECBP7NShFhkMih36z1vynvVQ5wCLfZ8w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-07-03  5:38           ` James Liao
2015-07-03  6:28             ` Daniel Kurtz
2015-06-30  2:58 ` [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for clock controllers James Liao
     [not found]   ` <1435633127-31952-3-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-07-01 13:47     ` Daniel Kurtz
     [not found]       ` <CAGS+omD9Mvz0-RQMc5TsWCPct80S5fyqMn3+-zR7HB9yb7KoDQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-07-02  2:52         ` James Liao
2015-07-02  4:26           ` Daniel Kurtz
     [not found]             ` <CAGS+omCgNstb+NPmRdbngnLm754hDPLO28KRc4RanCD2Myv7dQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-07-02 23:40               ` Stephen Boyd
     [not found]                 ` <5595CBDC.7090101-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2015-07-03 10:46                   ` Daniel Kurtz
2015-07-07  6:56                     ` James Liao
2015-07-01 16:03   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1435633127-31952-5-git-send-email-jamesjj.liao@mediatek.com \
    --to=jamesjj.liao-nus5lvnupcjwk0htik3j/w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=djkurtz-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    --cc=jcliang-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    --cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).