From: James Liao <jamesjj.liao@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
Mike Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Heiko Stubner <heiko@sntech.de>
Cc: srv_heupstream@mediatek.com, Daniel Kurtz <djkurtz@chromium.org>,
Ricky Liang <jcliang@chromium.org>,
Rob Herring <robh+dt@kernel.org>,
Sascha Hauer <kernel@pengutronix.de>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
James Liao <jamesjj.liao@mediatek.com>
Subject: [PATCH v2 2/2] clk: mediatek: Add MT8173 MMPLL change rate support
Date: Wed, 8 Jul 2015 16:37:46 +0800 [thread overview]
Message-ID: <1436344666-25645-3-git-send-email-jamesjj.liao@mediatek.com> (raw)
In-Reply-To: <1436344666-25645-1-git-send-email-jamesjj.liao@mediatek.com>
MT8173 MMPLL frequency settings are different from common PLLs.
It needs different post divider settings for some ranges of frequency.
This patch add support for MT8173 MMPLL frequency setting, includes:
1. Add div-rate table for PLLs.
2. Increase the max ost divider setting from 3 (/8) to 4 (/16).
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
---
drivers/clk/mediatek/clk-mt8173.c | 24 +++++++++++++++++++++---
drivers/clk/mediatek/clk-mtk.h | 6 ++++++
drivers/clk/mediatek/clk-pll.c | 18 +++++++++++++++---
3 files changed, 42 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
index 357b080..e3101e6 100644
--- a/drivers/clk/mediatek/clk-mt8173.c
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -779,8 +779,9 @@ CLK_OF_DECLARE(mtk_pericfg, "mediatek,mt8173-pericfg", mtk_pericfg_init);
#define CON0_MT8173_RST_BAR BIT(24)
-#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg, _pd_shift, \
- _tuner_reg, _pcw_reg, _pcw_shift) { \
+#define PLL_B(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, \
+ _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, \
+ _pcw_shift, _div_table) { \
.id = _id, \
.name = _name, \
.reg = _reg, \
@@ -795,14 +796,31 @@ CLK_OF_DECLARE(mtk_pericfg, "mediatek,mt8173-pericfg", mtk_pericfg_init);
.tuner_reg = _tuner_reg, \
.pcw_reg = _pcw_reg, \
.pcw_shift = _pcw_shift, \
+ .div_table = _div_table, \
}
+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, \
+ _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, \
+ _pcw_shift) \
+ PLL_B(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, \
+ _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift, \
+ NULL)
+
+static const struct mtk_pll_div_table mmpll_div_table[] = {
+ { .div = 0, .freq = MT8173_PLL_FMAX },
+ { .div = 1, .freq = 1000000000 },
+ { .div = 2, .freq = 702000000 },
+ { .div = 3, .freq = 253500000 },
+ { .div = 4, .freq = 126750000 },
+ { } /* sentinel */
+};
+
static const struct mtk_pll_data plls[] = {
PLL(CLK_APMIXED_ARMCA15PLL, "armca15pll", 0x200, 0x20c, 0x00000001, 0, 21, 0x204, 24, 0x0, 0x204, 0),
PLL(CLK_APMIXED_ARMCA7PLL, "armca7pll", 0x210, 0x21c, 0x00000001, 0, 21, 0x214, 24, 0x0, 0x214, 0),
PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x220, 0x22c, 0xf0000101, HAVE_RST_BAR, 21, 0x220, 4, 0x0, 0x224, 0),
PLL(CLK_APMIXED_UNIVPLL, "univpll", 0x230, 0x23c, 0xfe000001, HAVE_RST_BAR, 7, 0x230, 4, 0x0, 0x234, 14),
- PLL(CLK_APMIXED_MMPLL, "mmpll", 0x240, 0x24c, 0x00000001, 0, 21, 0x244, 24, 0x0, 0x244, 0),
+ PLL_B(CLK_APMIXED_MMPLL, "mmpll", 0x240, 0x24c, 0x00000001, 0, 21, 0x244, 24, 0x0, 0x244, 0, mmpll_div_table),
PLL(CLK_APMIXED_MSDCPLL, "msdcpll", 0x250, 0x25c, 0x00000001, 0, 21, 0x250, 4, 0x0, 0x254, 0),
PLL(CLK_APMIXED_VENCPLL, "vencpll", 0x260, 0x26c, 0x00000001, 0, 21, 0x260, 4, 0x0, 0x264, 0),
PLL(CLK_APMIXED_TVDPLL, "tvdpll", 0x270, 0x27c, 0x00000001, 0, 21, 0x270, 4, 0x0, 0x274, 0),
diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
index 61035b9..fa0c1fe 100644
--- a/drivers/clk/mediatek/clk-mtk.h
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -134,6 +134,11 @@ struct clk_onecell_data *mtk_alloc_clk_data(unsigned int clk_num);
#define HAVE_RST_BAR BIT(0)
+struct mtk_pll_div_table {
+ u32 div;
+ unsigned long freq;
+};
+
struct mtk_pll_data {
int id;
const char *name;
@@ -150,6 +155,7 @@ struct mtk_pll_data {
int pcwbits;
uint32_t pcw_reg;
int pcw_shift;
+ const struct mtk_pll_div_table *div_table;
};
void __init mtk_clk_register_plls(struct device_node *node,
diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index 68af518..622e7b6 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -138,16 +138,28 @@ static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
u32 freq, u32 fin)
{
unsigned long fmin = 1000 * MHZ;
+ const struct mtk_pll_div_table *div_table = pll->data->div_table;
u64 _pcw;
u32 val;
if (freq > pll->data->fmax)
freq = pll->data->fmax;
- for (val = 0; val < 4; val++) {
+ if (div_table) {
+ if (freq > div_table[0].freq)
+ freq = div_table[0].freq;
+
+ for (val = 0; div_table[val + 1].freq != 0; val++) {
+ if (freq > div_table[val + 1].freq)
+ break;
+ }
*postdiv = 1 << val;
- if (freq * *postdiv >= fmin)
- break;
+ } else {
+ for (val = 0; val < 5; val++) {
+ *postdiv = 1 << val;
+ if ((u64)freq * *postdiv >= fmin)
+ break;
+ }
}
/* _pcw = freq * postdiv / fin * 2^pcwfbits */
--
1.8.1.1.dirty
next prev parent reply other threads:[~2015-07-08 8:37 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-08 8:37 [PATCH 0/2] Add MT8173 MMPLL change rate support James Liao
2015-07-08 8:37 ` [PATCH v2 1/2] clk: mediatek: Fix PLL registers setting flow James Liao
2015-07-08 8:58 ` Heiko Stübner
2015-07-08 8:37 ` James Liao [this message]
[not found] ` <1436344666-25645-3-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-07-09 0:46 ` [PATCH v2 2/2] clk: mediatek: Add MT8173 MMPLL change rate support Stephen Boyd
[not found] ` <559DC44A.1030900-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2015-07-10 5:46 ` James Liao
[not found] ` <1436344666-25645-1-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-07-08 8:49 ` [PATCH 0/2] " James Liao
2015-07-09 0:44 ` Stephen Boyd
[not found] ` <559DC3EF.90401-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2015-07-10 5:44 ` James Liao
2015-07-14 22:13 ` Stephen Boyd
2015-07-15 9:51 ` James Liao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436344666-25645-3-git-send-email-jamesjj.liao@mediatek.com \
--to=jamesjj.liao@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=djkurtz@chromium.org \
--cc=heiko@sntech.de \
--cc=jcliang@chromium.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=srv_heupstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).