From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: [PATCH 3/3] regulator: pwm-regulator: Small clean-ups Date: Thu, 9 Jul 2015 16:35:28 +0100 Message-ID: <1436456128-18278-3-git-send-email-lee.jones@linaro.org> References: <1436456128-18278-1-git-send-email-lee.jones@linaro.org> Return-path: In-Reply-To: <1436456128-18278-1-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: kernel-F5mvAk5X5gdBDgjK7y7TUQ@public.gmane.org, broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Lee Jones List-Id: devicetree@vger.kernel.org Remove over-bracketing, use framework API to fetch PWM period and be more forthcoming that pwm_voltage_to_duty_cycle() actually returns duty cycle as a percentage, rather than a register value. Signed-off-by: Lee Jones --- drivers/regulator/pwm-regulator.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c index d92e667..936e387 100644 --- a/drivers/regulator/pwm-regulator.c +++ b/drivers/regulator/pwm-regulator.c @@ -92,13 +92,13 @@ static int pwm_regulator_list_voltage(struct regulator_dev *rdev, /** * Continuous voltage call-backs */ -static int pwm_voltage_to_duty_cycle(struct regulator_dev *rdev, int req_uV) +static int pwm_voltage_to_duty_cycle_percentage(struct regulator_dev *rdev, int req_uV) { int min_uV = rdev->constraints->min_uV; int max_uV = rdev->constraints->max_uV; int diff = max_uV - min_uV; - return 100 - ((((req_uV * 100) - (min_uV * 100)) / diff)); + return 100 - (((req_uV * 100) - (min_uV * 100)) / diff); } static int pwm_regulator_get_voltage(struct regulator_dev *rdev) @@ -114,14 +114,13 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev, { struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); unsigned int ramp_delay = rdev->constraints->ramp_delay; + unsigned int period = pwm_get_period(drvdata->pwm); int duty_cycle; int ret; - duty_cycle = pwm_voltage_to_duty_cycle(rdev, min_uV); + duty_cycle = pwm_voltage_to_duty_cycle_percentage(rdev, min_uV); - ret = pwm_config(drvdata->pwm, - (drvdata->pwm->period / 100) * duty_cycle, - drvdata->pwm->period); + ret = pwm_config(drvdata->pwm, (period / 100) * duty_cycle, period); if (ret) { dev_err(&rdev->dev, "Failed to configure PWM\n"); return ret; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html