From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joachim Eastwood Subject: [PATCH 2/2] doc: dt: add documentation for i2c-lpc2k Date: Mon, 13 Jul 2015 00:47:22 +0200 Message-ID: <1436741242-13489-3-git-send-email-manabian@gmail.com> References: <1436741242-13489-1-git-send-email-manabian@gmail.com> Return-path: In-Reply-To: <1436741242-13489-1-git-send-email-manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Sender: linux-i2c-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org Cc: Joachim Eastwood , linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: devicetree@vger.kernel.org Add binding documentation for the nxp,lpc1788-i2c controller which also can be found on LPC2xxx, LPC178x/7x and LPC18xx/43xx devices. Signed-off-by: Joachim Eastwood --- .../devicetree/bindings/i2c/i2c-lpc2k.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt b/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt new file mode 100644 index 000000000000..4101aa621ad4 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt @@ -0,0 +1,33 @@ +NXP I2C controller for LPC2xxx/178x/18xx/43xx + +Required properties: + - compatible: must be "nxp,lpc1788-i2c" + - reg: physical address and length of the device registers + - interrupts: a single interrupt specifier + - clocks: clock for the device + - #address-cells: should be <1> + - #size-cells: should be <0> + +Optional properties: +- clock-frequency: the desired I2C bus clock frequency in Hz; in + absence of this property the default value is used (100 kHz). + +Example: +i2c0: i2c@400a1000 { + compatible = "nxp,lpc1788-i2c"; + reg = <0x400a1000 0x1000>; + interrupts = <18>; + clocks = <&ccu1 CLK_APB1_I2C0>; + #address-cells = <1>; + #size-cells = <0>; +}; + +&i2c0 { + clock-frequency = <400000>; + + lm75@48 { + compatible = "nxp,lm75"; + reg = <0x48>; + }; +}; + -- 1.8.0