From: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: arnd-r2nGTMty4D4@public.gmane.org,
khilman-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org
Cc: Joachim Eastwood
<manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v2 0/2] Add support for PL172 memory-controller
Date: Mon, 13 Jul 2015 23:20:10 +0200 [thread overview]
Message-ID: <1436822412-20171-1-git-send-email-manabian@gmail.com> (raw)
This patch set adds a memory driver and documentation for the ARM
PL172. This driver makes it possible to configure the static
memory chip selects on the ARM PL172 MultiPort Memory Controller
from a set of properties in DT. Configuration of dynamic memory
(SDRAM) is not supported and is left to the boot loader. The
intended usage is to setup timing and configuration for static
memory devices like NAND and NOR Flash before they are probed by
a driver. Pretty much what like all the other memory drivers do.
As drivers/memory doesn't seem to have a maintainer of it's own
I hope this patch set can go through the armsoc-drivers branch.
The previous version of the patch set didn't recive recivce much
feedback and the cover letter can be found here:
http://marc.info/?l=devicetree&m=143024189625522&w=2
DT bindings for PL172 is based on the bindings for the TI AEMIF
memory controller. PL172 can be found on a number of NXP devices
like the LPC18xx family.
Tested on Embedded Artists' LPC4357 Developer's Kit with NOR Flash
(SST39VF320) and 74LCV16374 (gpio-74x164) on MPMC.
Changes since v1:
- Add proper commit messages
- Misc clean ups
Joachim Eastwood (2):
memory: add ARM PL172 MultiPort Memory Controller driver
doc: dt: add documentation for pl172 memory bindings
.../bindings/memory-controllers/arm,pl172.txt | 125 +++++++++
drivers/memory/Kconfig | 8 +
drivers/memory/Makefile | 1 +
drivers/memory/pl172.c | 302 +++++++++++++++++++++
4 files changed, 436 insertions(+)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt
create mode 100644 drivers/memory/pl172.c
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2015-07-13 21:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-13 21:20 Joachim Eastwood [this message]
[not found] ` <1436822412-20171-1-git-send-email-manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-07-13 21:20 ` [PATCH v2 1/2] memory: add ARM PL172 MultiPort Memory Controller driver Joachim Eastwood
2015-07-13 21:20 ` [PATCH v2 2/2] doc: dt: add documentation for pl172 memory bindings Joachim Eastwood
2015-07-17 17:44 ` [PATCH v2 0/2] Add support for PL172 memory-controller Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436822412-20171-1-git-send-email-manabian@gmail.com \
--to=manabian-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=khilman-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).