From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tim Bird Subject: [PATCH 1/3] ARM: dts: qcom: Add binding for the qcom coincell charger Date: Mon, 13 Jul 2015 16:39:30 -0700 Message-ID: <1436830772-32632-1-git-send-email-tim.bird@sonymobile.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: arnd-r2nGTMty4D4@public.gmane.org, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, pawel.moll-5wv7dgnIgG8@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org, Tim Bird List-Id: devicetree@vger.kernel.org This binding is used to configure the driver for the coincell charger found in Qualcomm PMICs. Signed-off-by: Tim Bird --- .../bindings/power/qcom,coincell-charger.txt | 44 ++++++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/qcom,coincell-charger.txt diff --git a/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt new file mode 100644 index 0000000..bf39e2a --- /dev/null +++ b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt @@ -0,0 +1,44 @@ +Qualcomm Coincell Charger: + +The hardware block controls charging for a coincell or capacitor that is +used to provide power backup for certain features of the power management +IC (PMIC) + +- compatible: + Usage: required + Value type: + Definition: must be: "qcom,pm8941-coincell" + +- reg: + Usage: required + Value type: + Definition: base address of the coincell charger registers + +- qcom,rset-ohms: + Usage: required + Value type: + Definition: resistance (in ohms) for current-limiting resistor + must be one of: 800, 1200, 1700, 2100 + +- qcom,vset-millivolts: + Usage: required + Value type: + Definition: voltage (in millivolts) to apply for charging + must be one of: 2500, 3000, 3100, 3200 + +- qcom,charge-enable: + Usage: optional + Value type: or + Definition: definining this property, with an optional non-zero + value, enables charging + +Examples: + + qcom,coincell@2800 { + compatible = "qcom,pm8941-coincell"; + reg = <0x2800>; + + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; + qcom,charge-enable; + }; -- 1.8.2.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html