[PATCH] backlight: pm8941-wled: Add default-brightness property

[Bjorn Andersson <bjorn.andersson@sonymobile.com>]

Add the possibility of specifying the default brightness in DT.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---

This depends on the patch moving pm8941-wled to backlight [1]. The dt property
is used by several other backlight drivers, so I considered this to be a
"common" property and it's hence not prefixed with "qcom,".

[1] https://lkml.org/lkml/2015/7/21/906

 Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt | 1 +
 drivers/video/backlight/pm8941-wled.c                             | 4 ++++
 2 files changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt b/Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt
index 424f8444a6cd..37503f8c3620 100644
--- a/Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt
+++ b/Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt
@@ -5,6 +5,7 @@ Required properties:
 - reg: slave address
 
 Optional properties:
+- default-brightness: value from: 0-4095
 - label: The name of the backlight device
 - qcom,cs-out: bool; enable current sink output
 - qcom,cabc: bool; enable content adaptive backlight control
diff --git a/drivers/video/backlight/pm8941-wled.c b/drivers/video/backlight/pm8941-wled.c
index c704c3236034..b875e58df0fc 100644
--- a/drivers/video/backlight/pm8941-wled.c
+++ b/drivers/video/backlight/pm8941-wled.c
@@ -373,6 +373,7 @@ static int pm8941_wled_probe(struct platform_device *pdev)
 	struct backlight_device *bl;
 	struct pm8941_wled *wled;
 	struct regmap *regmap;
+	u32 val = 0;
 	int rc;
 
 	regmap = dev_get_regmap(pdev->dev.parent, NULL);
@@ -395,8 +396,11 @@ static int pm8941_wled_probe(struct platform_device *pdev)
 	if (rc)
 		return rc;
 
+	of_property_read_u32(pdev->dev.of_node, "default-brightness", &val);
+
 	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_RAW;
+	props.brightness = val;
 	props.max_brightness = PM8941_WLED_REG_VAL_MAX;
 	bl = devm_backlight_device_register(&pdev->dev, wled->name,
 					    &pdev->dev, wled,
-- 
1.8.2.2