From: Jianwei Wang <jianwei.wang.chn@gmail.com>
To: dri-devel@lists.freedesktop.org
Cc: devicetree@vger.kernel.org,
Xiubo Li <lixiubo@cmss.chinamobile.com>,
daniel.vetter@ffwll.ch, Alison Wang <b18965@freescale.com>,
linux-kernel@vger.kernel.org, scottwood@freescale.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v12 3/6] drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel
Date: Fri, 24 Jul 2015 18:34:11 +0800 [thread overview]
Message-ID: <1437734054-36163-4-git-send-email-jianwei.wang.chn@gmail.com> (raw)
In-Reply-To: <1437734054-36163-1-git-send-email-jianwei.wang.chn@gmail.com>
This adds support for the NEC NL4827HC19-05B 480x272 panel to the DRM
simple panel driver.
Signed-off-by: Alison Wang <b18965@freescale.com>
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
.../bindings/panel/nec,nl4827hc19_05b.txt | 7 ++++++
drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++
2 files changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/panel/nec,nl4827hc19_05b.txt
diff --git a/Documentation/devicetree/bindings/panel/nec,nl4827hc19_05b.txt b/Documentation/devicetree/bindings/panel/nec,nl4827hc19_05b.txt
new file mode 100644
index 0000000..20e9473
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/nec,nl4827hc19_05b.txt
@@ -0,0 +1,7 @@
+NEC LCD Technologies,Ltd. WQVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "nec,nl4827hc19_05b"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index f94201b..db61dd1 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -943,6 +943,29 @@ static const struct panel_desc lg_lp129qe = {
},
};
+static const struct drm_display_mode nec_nl4827hc19_05b_mode = {
+ .clock = 10870,
+ .hdisplay = 480,
+ .hsync_start = 480 + 2,
+ .hsync_end = 480 + 2 + 41,
+ .htotal = 480 + 2 + 41 + 2,
+ .vdisplay = 272,
+ .vsync_start = 272 + 2,
+ .vsync_end = 272 + 2 + 4,
+ .vtotal = 272 + 2 + 4 + 2,
+ .vrefresh = 74,
+};
+
+static const struct panel_desc nec_nl4827hc19_05b = {
+ .modes = &nec_nl4827hc19_05b_mode,
+ .num_modes = 1,
+ .size = {
+ .width = 95,
+ .height = 54,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24
+};
+
static const struct drm_display_mode ortustech_com43h4m85ulc_mode = {
.clock = 25000,
.hdisplay = 480,
@@ -1113,6 +1136,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "lg,lp129qe",
.data = &lg_lp129qe,
}, {
+ .compatible = "nec,nl4827hc19_05b",
+ .data = &nec_nl4827hc19_05b,
+ }, {
.compatible = "ortustech,com43h4m85ulc",
.data = &ortustech_com43h4m85ulc,
}, {
--
2.1.0.27.g96db324
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2015-07-24 10:34 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-24 10:34 [PATCH v12 0/6] drm/layerscape: Add Freescale DCU DRM driver Jianwei Wang
2015-07-24 10:34 ` [PATCH v12 1/6] " Jianwei Wang
2015-07-24 10:34 ` [PATCH v12 2/6] devicetree: Add NEC to the vendor-prefix list Jianwei Wang
2015-07-24 10:34 ` Jianwei Wang [this message]
2015-07-24 10:34 ` [PATCH v12 4/6] arm/dts/ls1021a: Add DCU dts node Jianwei Wang
[not found] ` <1437734054-36163-5-git-send-email-jianwei.wang.chn-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-07-25 3:27 ` Shawn Guo
2015-07-27 2:39 ` Jianwei Wang
2015-07-24 10:34 ` [PATCH v12 5/6] arm/dts/ls1021a: Add a TFT LCD panel " Jianwei Wang
2015-07-24 10:34 ` [PATCH v12 6/6] MAINTAINERS: add Freescale DCU DRM driver maintainer Jianwei Wang
-- strict thread matches above, loose matches on Subject: below --
2015-07-24 10:12 [PATCH v12 0/6] drm/layerscape: Add Freescale DCU DRM driver Jianwei Wang
2015-07-24 10:12 ` [PATCH v12 3/6] drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel Jianwei Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437734054-36163-4-git-send-email-jianwei.wang.chn@gmail.com \
--to=jianwei.wang.chn@gmail.com \
--cc=b18965@freescale.com \
--cc=daniel.vetter@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lixiubo@cmss.chinamobile.com \
--cc=scottwood@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).