From: <dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
To: p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org
Cc: dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Dinh Nguyen
<dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
Subject: [PATCH 3/4] reset: socfpga: Update reset-socfpga to read the altr,modrst-offset property
Date: Mon, 27 Jul 2015 13:57:23 -0500 [thread overview]
Message-ID: <1438023444-11881-4-git-send-email-dinguyen@opensource.altera.com> (raw)
In-Reply-To: <1438023444-11881-1-git-send-email-dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
From: Dinh Nguyen <dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
In order for the Arria10 to be able to re-use the reset driver for SoCFPGA
Cyclone5/Arria5, we need to read the 'altr,modrst-offset' property from the
device tree entry. The 'altr,modrst-offset' property is the first register
into the reset manager that is used for bringing peripherals out of reset.
Signed-off-by: Dinh Nguyen <dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
---
drivers/reset/reset-socfpga.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c
index 0a8def3..9074d41 100644
--- a/drivers/reset/reset-socfpga.c
+++ b/drivers/reset/reset-socfpga.c
@@ -24,11 +24,11 @@
#include <linux/types.h>
#define NR_BANKS 4
-#define OFFSET_MODRST 0x10
struct socfpga_reset_data {
spinlock_t lock;
void __iomem *membase;
+ u32 modrst_offset;
struct reset_controller_dev rcdev;
};
@@ -45,8 +45,8 @@ static int socfpga_reset_assert(struct reset_controller_dev *rcdev,
spin_lock_irqsave(&data->lock, flags);
- reg = readl(data->membase + OFFSET_MODRST + (bank * NR_BANKS));
- writel(reg | BIT(offset), data->membase + OFFSET_MODRST +
+ reg = readl(data->membase + data->modrst_offset + (bank * NR_BANKS));
+ writel(reg | BIT(offset), data->membase + data->modrst_offset +
(bank * NR_BANKS));
spin_unlock_irqrestore(&data->lock, flags);
@@ -67,8 +67,8 @@ static int socfpga_reset_deassert(struct reset_controller_dev *rcdev,
spin_lock_irqsave(&data->lock, flags);
- reg = readl(data->membase + OFFSET_MODRST + (bank * NR_BANKS));
- writel(reg & ~BIT(offset), data->membase + OFFSET_MODRST +
+ reg = readl(data->membase + data->modrst_offset + (bank * NR_BANKS));
+ writel(reg & ~BIT(offset), data->membase + data->modrst_offset +
(bank * NR_BANKS));
spin_unlock_irqrestore(&data->lock, flags);
@@ -85,7 +85,7 @@ static int socfpga_reset_status(struct reset_controller_dev *rcdev,
int offset = id % BITS_PER_LONG;
u32 reg;
- reg = readl(data->membase + OFFSET_MODRST + (bank * NR_BANKS));
+ reg = readl(data->membase + data->modrst_offset + (bank * NR_BANKS));
return !(reg & BIT(offset));
}
@@ -100,6 +100,8 @@ static int socfpga_reset_probe(struct platform_device *pdev)
{
struct socfpga_reset_data *data;
struct resource *res;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
/*
* The binding was mainlined without the required property.
@@ -120,6 +122,11 @@ static int socfpga_reset_probe(struct platform_device *pdev)
if (IS_ERR(data->membase))
return PTR_ERR(data->membase);
+ if (of_property_read_u32(np, "altr,modrst-offset", &data->modrst_offset)) {
+ dev_err(dev, "no altr,modrst-offset specified in device tree\n");
+ return -ENODEV;
+ }
+
spin_lock_init(&data->lock);
data->rcdev.owner = THIS_MODULE;
--
2.4.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-07-27 18:57 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-27 18:57 [PATCH 0/4] reset: socfpga: Add reset driver support for Arria10 platform dinguyen
2015-07-27 18:57 ` [PATCH 1/4] dt-bindings: Add reset manager offsets for Arria10 dinguyen
[not found] ` <1438023444-11881-1-git-send-email-dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2015-07-27 18:57 ` [PATCH 2/4] ARM: socfpga: dts: add "altr,modrst-offset" property dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
2015-07-27 18:57 ` dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx [this message]
2015-07-28 8:46 ` [PATCH 3/4] reset: socfpga: Update reset-socfpga to read the altr,modrst-offset property Philipp Zabel
2015-07-28 13:46 ` Dinh Nguyen
2015-07-27 18:57 ` [PATCH 4/4] ARM: socfpga: dts: Add resets for EMACs on Arria10 dinguyen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438023444-11881-4-git-send-email-dinguyen@opensource.altera.com \
--to=dinguyen-yzvpicuk2abmcg4ihk0kfoh6mc4mb0vx@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).