From: Kishon Vijay Abraham I <kishon@ti.com>
To: tony@atomide.com, ulf.hansson@linaro.org, afenkart@gmail.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mmc@vger.kernel.org
Cc: nsekhar@ti.com, kishon@ti.com
Subject: [PATCH 11/17] mmc: host: omap_hsmmc: don't use ->set_power to set initial regulator state
Date: Wed, 29 Jul 2015 16:39:41 +0530 [thread overview]
Message-ID: <1438168187-1614-12-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1438168187-1614-1-git-send-email-kishon@ti.com>
If the regulator is enabled on boot (checked using regulator_is_enabled),
invoke regulator_enable() so that the usecount reflects the correct
state of the regulator and then disable the regulator so that the
initial state of the regulator is disabled. Avoid using ->set_power,
since set_power also takes care of setting the voltages which is not
needed at this point.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/mmc/host/omap_hsmmc.c | 67 +++++++++++++++++++++++++++++++++++------
1 file changed, 57 insertions(+), 10 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 2e5c7cd..58bda42 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -407,9 +407,63 @@ err_set_voltage:
return ret;
}
+static int omap_hsmmc_disable_boot_regulator(struct regulator *reg)
+{
+ int ret;
+
+ if (!reg)
+ return 0;
+
+ if (regulator_is_enabled(reg)) {
+ ret = regulator_enable(reg);
+ if (ret)
+ return ret;
+
+ ret = regulator_disable(reg);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int omap_hsmmc_disable_boot_regulators(struct omap_hsmmc_host *host)
+{
+ struct mmc_host *mmc = host->mmc;
+ int ret;
+
+ /*
+ * disable regulators enabled during boot and get the usecount
+ * right so that regulators can be enabled/disabled by checking
+ * the return value of regulator_is_enabled
+ */
+ ret = omap_hsmmc_disable_boot_regulator(mmc->supply.vmmc);
+ if (ret) {
+ dev_err(host->dev, "fail to disable boot enabled vmmc reg\n");
+ return ret;
+ }
+
+ ret = omap_hsmmc_disable_boot_regulator(mmc->supply.vqmmc);
+ if (ret) {
+ dev_err(host->dev,
+ "fail to disable boot enabled vmmc_aux reg\n");
+ return ret;
+ }
+
+ ret = omap_hsmmc_disable_boot_regulator(host->pbias);
+ if (ret) {
+ dev_err(host->dev,
+ "failed to disable boot enabled pbias reg\n");
+ return ret;
+ }
+
+ return 0;
+}
+
static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
{
int ocr_value = 0;
+ int ret;
struct mmc_host *mmc = host->mmc;
mmc->supply.vmmc = devm_regulator_get_optional(host->dev, "vmmc");
@@ -448,17 +502,10 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
/* For eMMC do not power off when not in sleep state */
if (mmc_pdata(host)->no_regulator_off_init)
return 0;
- /*
- * To disable boot_on regulator, enable regulator
- * to increase usecount and then disable it.
- */
- if ((mmc->supply.vmmc && regulator_is_enabled(mmc->supply.vmmc) > 0) ||
- (mmc->supply.vqmmc && regulator_is_enabled(mmc->supply.vqmmc))) {
- int vdd = ffs(mmc_pdata(host)->ocr_mask) - 1;
- mmc_pdata(host)->set_power(host->dev, 1, vdd);
- mmc_pdata(host)->set_power(host->dev, 0, 0);
- }
+ ret = omap_hsmmc_disable_boot_regulators(host);
+ if (ret)
+ return ret;
return 0;
}
--
1.7.9.5
next prev parent reply other threads:[~2015-07-29 11:09 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-29 11:09 [PATCH 00/17] omap_hsmmc: regulator usage cleanup and fixes Kishon Vijay Abraham I
2015-07-29 11:09 ` [PATCH 01/17] mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc Kishon Vijay Abraham I
[not found] ` <1438168187-1614-2-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2015-07-29 12:09 ` Grygorii Strashko
2015-07-31 15:29 ` Kishon Vijay Abraham I
2015-07-29 11:09 ` [PATCH 02/17] mmc: host: omap_hsmmc: return error from omap_hsmmc_reg_get on -EPROBE_DEFER Kishon Vijay Abraham I
2015-07-29 11:09 ` [PATCH 03/17] mmc: host: omap_hsmmc: cleanup omap_hsmmc_reg_get() Kishon Vijay Abraham I
2015-07-29 11:09 ` [PATCH 04/17] mmc: host: omap_hsmmc: use the ocrmask provided by the vmmc regulator Kishon Vijay Abraham I
2015-07-29 11:09 ` [PATCH 05/17] mmc: host: omap_hsmmc: use mmc_host's vmmc and vqmmc Kishon Vijay Abraham I
2015-07-29 11:09 ` [PATCH 06/17] mmc: host: omap_hsmmc: remove unnecessary pbias set_voltage Kishon Vijay Abraham I
2015-07-29 11:09 ` [PATCH 07/17] mmc: host: omap_hsmmc: return error if any of the regulator APIs fail Kishon Vijay Abraham I
2015-07-29 11:09 ` [PATCH 08/17] mmc: host: omap_hsmmc: add separate functions for enable/disable supply Kishon Vijay Abraham I
2015-07-29 11:09 ` [PATCH 09/17] mmc: host: omap_hsmmc: add separate function to set pbias Kishon Vijay Abraham I
2015-07-29 11:09 ` [PATCH 10/17] mmc: host: omap_hsmmc: avoid pbias regulator enable on power off Kishon Vijay Abraham I
2015-07-29 11:09 ` Kishon Vijay Abraham I [this message]
2015-07-29 11:09 ` [PATCH 12/17] ARM: dts: am57xx-beagle-x15: Fix regulator populated in MMC1 dt node Kishon Vijay Abraham I
2015-07-29 19:37 ` Nishanth Menon
[not found] ` <55B92B88.1080409-l0cyMroinI0@public.gmane.org>
2015-08-25 6:36 ` Kishon Vijay Abraham I
2015-09-14 17:12 ` Tony Lindgren
2015-07-29 11:09 ` [PATCH 13/17] mmc: host: omap_hsmmc: enable/disable vmmc_aux regulator based on prior state Kishon Vijay Abraham I
2015-07-29 11:09 ` [PATCH 14/17] mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status Kishon Vijay Abraham I
2015-07-29 11:09 ` [PATCH 15/17] mmc: host: omap_hsmmc: use ios->vdd for setting vmmc voltage Kishon Vijay Abraham I
2015-07-29 11:09 ` [PATCH 16/17] mmc: host: omap_hsmmc: remove CONFIG_REGULATOR check Kishon Vijay Abraham I
2015-07-29 11:09 ` [PATCH 17/17] mmc: host: omap_hsmmc: use "mmc_of_parse_voltage" to get ocr_avail Kishon Vijay Abraham I
2015-08-03 7:28 ` [PATCH 00/17] omap_hsmmc: regulator usage cleanup and fixes Andreas Fenkart
[not found] ` <CALtMJEDP1-Q9W=x-0hq3tZQ1QZ2LVwVj47=ADYDjT7BsfanffA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-08-03 12:12 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438168187-1614-12-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=afenkart@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=tony@atomide.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).