[PATCH v2 01/11] [media] stv0367: Refine i2c error trace to include i2c address

[Peter Griffin <peter.griffin@linaro.org>]

When using stv0367 demodulator with STi STB platforms,
we can have easily have four or more stv0367 demods running
in the system at one time.

As typically the b2120 reference design ships with a b2004a daughter
board, which can accept two dvb NIM cards, and each b2100A NIM
has 2x stv0367 demods and 2x NXPs tuner on it.

In such circumstances it is useful to print the i2c address
on error messages to know which one is failing due to I2C issues.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
 drivers/media/dvb-frontends/stv0367.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/media/dvb-frontends/stv0367.c b/drivers/media/dvb-frontends/stv0367.c
index ec3e18e..9a49db1 100644
--- a/drivers/media/dvb-frontends/stv0367.c
+++ b/drivers/media/dvb-frontends/stv0367.c
@@ -791,11 +791,13 @@ int stv0367_writeregs(struct stv0367_state *state, u16 reg, u8 *data, int len)
 	memcpy(buf + 2, data, len);
 
 	if (i2cdebug)
-		printk(KERN_DEBUG "%s: %02x: %02x\n", __func__, reg, buf[2]);
+		printk(KERN_DEBUG "%s: [%02x] %02x: %02x\n", __func__,
+			state->config->demod_address, reg, buf[2]);
 
 	ret = i2c_transfer(state->i2c, &msg, 1);
 	if (ret != 1)
-		printk(KERN_ERR "%s: i2c write error!\n", __func__);
+		printk(KERN_ERR "%s: i2c write error! ([%02x] %02x: %02x)\n",
+			__func__, state->config->demod_address, reg, buf[2]);
 
 	return (ret != 1) ? -EREMOTEIO : 0;
 }
@@ -829,10 +831,12 @@ static u8 stv0367_readreg(struct stv0367_state *state, u16 reg)
 
 	ret = i2c_transfer(state->i2c, msg, 2);
 	if (ret != 2)
-		printk(KERN_ERR "%s: i2c read error\n", __func__);
+		printk(KERN_ERR "%s: i2c read error ([%02x] %02x: %02x)\n",
+			__func__, state->config->demod_address, reg, b1[0]);
 
 	if (i2cdebug)
-		printk(KERN_DEBUG "%s: %02x: %02x\n", __func__, reg, b1[0]);
+		printk(KERN_DEBUG "%s: [%02x] %02x: %02x\n", __func__,
+			state->config->demod_address, reg, b1[0]);
 
 	return b1[0];
 }
-- 
1.9.1