From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Subject: [PATCH] ARM: dts: sun7i: Change cubietruck wifi enable pin to use mmc-pwrseq Date: Fri, 31 Jul 2015 17:41:52 +0200 Message-ID: <1438357312-17378-1-git-send-email-hdegoede@redhat.com> Reply-To: hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Maxime Ripard Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree , linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, Hans de Goede List-Id: devicetree@vger.kernel.org The wifi-enable pin of the ap6210 module is not really a regulator, switch to the mmc-pwrseq framework for controlling it. This more accurately reflects how the hardware actually works. Signed-off-by: Hans de Goede --- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index de3e195..0b2f914 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -88,15 +88,11 @@ }; }; - reg_vmmc3: vmmc3 { - compatible = "regulator-fixed"; + mmc3_pwrseq: mmc3_pwrseq { + compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; pinctrl-0 = <&vmmc3_pin_cubietruck>; - regulator-name = "vmmc3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ }; }; @@ -179,7 +175,8 @@ &mmc3 { pinctrl-names = "default"; pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; non-removable; status = "okay"; -- 2.4.3