devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: ulf.hansson@linaro.org, afenkart@gmail.com, tony@atomide.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-mmc@vger.kernel.org, linux-omap@vger.kernel.org
Cc: nsekhar@ti.com, kishon@ti.com
Subject: [PATCH v2 00/16] omap_hsmmc: regulator usage cleanup and fixes
Date: Mon, 3 Aug 2015 17:56:25 +0530	[thread overview]
Message-ID: <1438604801-11823-1-git-send-email-kishon@ti.com> (raw)

Changes from v1:
*) return on -EPROBE_DEFER and other fatal errors. (Don't return only
   if the return value is -ENODEV)
*) Remove the beagle x15 dts patch. It can be part of a different
   series.
*) Avoid using regulator_is_enabled for vqmmc since if the regulator
   is shared and the other users are not using regulator_is_enabled
   then there can be unbalanced regulator_enable/regulator_disable

This patch series does the following
*) Uses devm_regulator_get_optional() for vmmc and then removes the
   CONFIG_REGULATOR check altogether.
*) return on -EPROBE_DEFER and any other fatal errors
*) enable/disable vmmc_aux regulator based on prior state

I've pushed this patch series to
git://git.ti.com/linux-phy/linux-phy.git mmc_regulator_cleanup_fixes_v2

Please note the branch also has the pbias fixes [1] & [2].
[1] -> https://lkml.org/lkml/2015/7/27/358
[2] -> https://lkml.org/lkml/2015/7/27/391

This series is in preparation for implementing the voltage switch
sequence so that UHS cards can be supported.

Did basic read/write test in J6, J6 Eco, Beagle-x15, AM437x EVM,
Beaglebone black, OMAP5 uEVM and OMAP4 PANDA.

Kishon Vijay Abraham I (15):
  mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc
  mmc: host: omap_hsmmc: return on fatal errors from omap_hsmmc_reg_get
  mmc: host: omap_hsmmc: cleanup omap_hsmmc_reg_get()
  mmc: host: omap_hsmmc: use the ocrmask provided by the vmmc regulator
  mmc: host: omap_hsmmc: use mmc_host's vmmc and vqmmc
  mmc: host: omap_hsmmc: remove unnecessary pbias set_voltage
  mmc: host: omap_hsmmc: return error if any of the regulator APIs fail
  mmc: host: omap_hsmmc: add separate functions for enable/disable
    supply
  mmc: host: omap_hsmmc: add separate function to set pbias
  mmc: host: omap_hsmmc: avoid pbias regulator enable on power off
  mmc: host: omap_hsmmc: don't use ->set_power to set initial regulator
    state
  mmc: host: omap_hsmmc: enable/disable vmmc_aux regulator based on
    previous state
  mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status
  mmc: host: omap_hsmmc: use ios->vdd for setting vmmc voltage
  mmc: host: omap_hsmmc: remove CONFIG_REGULATOR check

Roger Quadros (1):
  mmc: host: omap_hsmmc: use "mmc_of_parse_voltage" to get ocr_avail

 .../devicetree/bindings/mmc/ti-omap-hsmmc.txt      |    2 +
 drivers/mmc/host/omap_hsmmc.c                      |  340 +++++++++++++-------
 2 files changed, 224 insertions(+), 118 deletions(-)

-- 
1.7.9.5


             reply	other threads:[~2015-08-03 12:26 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-03 12:26 Kishon Vijay Abraham I [this message]
2015-08-03 12:26 ` [PATCH v2 01/16] mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 02/16] mmc: host: omap_hsmmc: return on fatal errors from omap_hsmmc_reg_get Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 03/16] mmc: host: omap_hsmmc: cleanup omap_hsmmc_reg_get() Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 04/16] mmc: host: omap_hsmmc: use the ocrmask provided by the vmmc regulator Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 05/16] mmc: host: omap_hsmmc: use mmc_host's vmmc and vqmmc Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 06/16] mmc: host: omap_hsmmc: remove unnecessary pbias set_voltage Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 07/16] mmc: host: omap_hsmmc: return error if any of the regulator APIs fail Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 08/16] mmc: host: omap_hsmmc: add separate functions for enable/disable supply Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 09/16] mmc: host: omap_hsmmc: add separate function to set pbias Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 10/16] mmc: host: omap_hsmmc: avoid pbias regulator enable on power off Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 11/16] mmc: host: omap_hsmmc: don't use ->set_power to set initial regulator state Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 12/16] mmc: host: omap_hsmmc: enable/disable vmmc_aux regulator based on previous state Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 13/16] mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 14/16] mmc: host: omap_hsmmc: use ios->vdd for setting vmmc voltage Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 15/16] mmc: host: omap_hsmmc: remove CONFIG_REGULATOR check Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 16/16] mmc: host: omap_hsmmc: use "mmc_of_parse_voltage" to get ocr_avail Kishon Vijay Abraham I
2015-08-25 14:50   ` Ulf Hansson
2015-08-26 12:21     ` Kishon Vijay Abraham I
2015-11-11 10:26     ` Roger Quadros
2015-11-11 11:40       ` Ulf Hansson
2015-08-20 12:36 ` [PATCH v2 00/16] omap_hsmmc: regulator usage cleanup and fixes Kishon Vijay Abraham I
2015-08-21  7:41   ` Tony Lindgren
2015-08-21 13:27     ` Kishon Vijay Abraham I
2015-08-25 11:50 ` Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1438604801-11823-1-git-send-email-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=afenkart@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=tony@atomide.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).