From: Kishon Vijay Abraham I <kishon@ti.com>
To: ulf.hansson@linaro.org, afenkart@gmail.com, tony@atomide.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mmc@vger.kernel.org, linux-omap@vger.kernel.org
Cc: nsekhar@ti.com, kishon@ti.com
Subject: [PATCH v2 05/16] mmc: host: omap_hsmmc: use mmc_host's vmmc and vqmmc
Date: Mon, 3 Aug 2015 17:56:30 +0530 [thread overview]
Message-ID: <1438604801-11823-6-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1438604801-11823-1-git-send-email-kishon@ti.com>
No functional change. Instead of using omap_hsmmc_host's vcc and vcc_aux
members, use vmmc and vqmmc present in mmc_host which is present
for the same purpose.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
---
drivers/mmc/host/omap_hsmmc.c | 63 ++++++++++++++++++-----------------------
1 file changed, 28 insertions(+), 35 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 8cf040f..f6b056f 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -181,15 +181,6 @@ struct omap_hsmmc_host {
struct mmc_data *data;
struct clk *fclk;
struct clk *dbclk;
- /*
- * vcc == configured supply
- * vcc_aux == optional
- * - MMC1, supply for DAT4..DAT7
- * - MMC2/MMC2, external level shifter voltage supply, for
- * chip (SDIO, eMMC, etc) or transceiver (MMC2 only)
- */
- struct regulator *vcc;
- struct regulator *vcc_aux;
struct regulator *pbias;
bool pbias_enabled;
void __iomem *base;
@@ -260,13 +251,14 @@ static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
{
struct omap_hsmmc_host *host =
platform_get_drvdata(to_platform_device(dev));
+ struct mmc_host *mmc = host->mmc;
int ret = 0;
/*
* If we don't see a Vcc regulator, assume it's a fixed
* voltage always-on regulator.
*/
- if (!host->vcc)
+ if (!mmc->supply.vmmc)
return 0;
if (mmc_pdata(host)->before_set_reg)
@@ -295,23 +287,23 @@ static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
* chips/cards need an interface voltage rail too.
*/
if (power_on) {
- if (host->vcc)
- ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
+ if (mmc->supply.vmmc)
+ ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
/* Enable interface voltage rail, if needed */
- if (ret == 0 && host->vcc_aux) {
- ret = regulator_enable(host->vcc_aux);
- if (ret < 0 && host->vcc)
- ret = mmc_regulator_set_ocr(host->mmc,
- host->vcc, 0);
+ if (ret == 0 && mmc->supply.vqmmc) {
+ ret = regulator_enable(mmc->supply.vqmmc);
+ if (ret < 0 && mmc->supply.vmmc)
+ ret = mmc_regulator_set_ocr(mmc,
+ mmc->supply.vmmc,
+ 0);
}
} else {
/* Shut down the rail */
- if (host->vcc_aux)
- ret = regulator_disable(host->vcc_aux);
- if (host->vcc) {
+ if (mmc->supply.vqmmc)
+ ret = regulator_disable(mmc->supply.vqmmc);
+ if (mmc->supply.vmmc) {
/* Then proceed to shut down the local regulator */
- ret = mmc_regulator_set_ocr(host->mmc,
- host->vcc, 0);
+ ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
}
}
@@ -343,31 +335,32 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
{
int ocr_value = 0;
int ret;
+ struct mmc_host *mmc = host->mmc;
- host->vcc = devm_regulator_get_optional(host->dev, "vmmc");
- if (IS_ERR(host->vcc)) {
- ret = PTR_ERR(host->vcc);
+ mmc->supply.vmmc = devm_regulator_get_optional(host->dev, "vmmc");
+ if (IS_ERR(mmc->supply.vmmc)) {
+ ret = PTR_ERR(mmc->supply.vmmc);
if (ret != -ENODEV)
return ret;
dev_dbg(host->dev, "unable to get vmmc regulator %ld\n",
- PTR_ERR(host->vcc));
- host->vcc = NULL;
+ PTR_ERR(mmc->supply.vmmc));
+ mmc->supply.vmmc = NULL;
} else {
- ocr_value = mmc_regulator_get_ocrmask(host->vcc);
+ ocr_value = mmc_regulator_get_ocrmask(mmc->supply.vmmc);
if (ocr_value > 0)
mmc_pdata(host)->ocr_mask = ocr_value;
}
mmc_pdata(host)->set_power = omap_hsmmc_set_power;
/* Allow an aux regulator */
- host->vcc_aux = devm_regulator_get_optional(host->dev, "vmmc_aux");
- if (IS_ERR(host->vcc_aux)) {
- ret = PTR_ERR(host->vcc_aux);
+ mmc->supply.vqmmc = devm_regulator_get_optional(host->dev, "vmmc_aux");
+ if (IS_ERR(mmc->supply.vqmmc)) {
+ ret = PTR_ERR(mmc->supply.vqmmc);
if (ret != -ENODEV)
return ret;
dev_dbg(host->dev, "unable to get vmmc_aux regulator %ld\n",
- PTR_ERR(host->vcc_aux));
- host->vcc_aux = NULL;
+ PTR_ERR(mmc->supply.vqmmc));
+ mmc->supply.vqmmc = NULL;
}
host->pbias = devm_regulator_get_optional(host->dev, "pbias");
@@ -387,8 +380,8 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
* To disable boot_on regulator, enable regulator
* to increase usecount and then disable it.
*/
- if ((host->vcc && regulator_is_enabled(host->vcc) > 0) ||
- (host->vcc_aux && regulator_is_enabled(host->vcc_aux))) {
+ if ((mmc->supply.vmmc && regulator_is_enabled(mmc->supply.vmmc) > 0) ||
+ (mmc->supply.vqmmc && regulator_is_enabled(mmc->supply.vqmmc))) {
int vdd = ffs(mmc_pdata(host)->ocr_mask) - 1;
mmc_pdata(host)->set_power(host->dev, 1, vdd);
--
1.7.9.5
next prev parent reply other threads:[~2015-08-03 12:26 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-03 12:26 [PATCH v2 00/16] omap_hsmmc: regulator usage cleanup and fixes Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 01/16] mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 02/16] mmc: host: omap_hsmmc: return on fatal errors from omap_hsmmc_reg_get Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 03/16] mmc: host: omap_hsmmc: cleanup omap_hsmmc_reg_get() Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 04/16] mmc: host: omap_hsmmc: use the ocrmask provided by the vmmc regulator Kishon Vijay Abraham I
2015-08-03 12:26 ` Kishon Vijay Abraham I [this message]
2015-08-03 12:26 ` [PATCH v2 06/16] mmc: host: omap_hsmmc: remove unnecessary pbias set_voltage Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 07/16] mmc: host: omap_hsmmc: return error if any of the regulator APIs fail Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 08/16] mmc: host: omap_hsmmc: add separate functions for enable/disable supply Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 09/16] mmc: host: omap_hsmmc: add separate function to set pbias Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 10/16] mmc: host: omap_hsmmc: avoid pbias regulator enable on power off Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 11/16] mmc: host: omap_hsmmc: don't use ->set_power to set initial regulator state Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 12/16] mmc: host: omap_hsmmc: enable/disable vmmc_aux regulator based on previous state Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 13/16] mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 14/16] mmc: host: omap_hsmmc: use ios->vdd for setting vmmc voltage Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 15/16] mmc: host: omap_hsmmc: remove CONFIG_REGULATOR check Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 16/16] mmc: host: omap_hsmmc: use "mmc_of_parse_voltage" to get ocr_avail Kishon Vijay Abraham I
2015-08-25 14:50 ` Ulf Hansson
2015-08-26 12:21 ` Kishon Vijay Abraham I
2015-11-11 10:26 ` Roger Quadros
2015-11-11 11:40 ` Ulf Hansson
2015-08-20 12:36 ` [PATCH v2 00/16] omap_hsmmc: regulator usage cleanup and fixes Kishon Vijay Abraham I
2015-08-21 7:41 ` Tony Lindgren
2015-08-21 13:27 ` Kishon Vijay Abraham I
2015-08-25 11:50 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438604801-11823-6-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=afenkart@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=tony@atomide.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).