From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
Kevin Hilman <khilman@kernel.org>,
Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
linux-sh@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v4 08/16] ARM: shmobile: r8a7779 dtsi: Add CPG/MSTP Clock Domain
Date: Tue, 4 Aug 2015 14:28:09 +0200 [thread overview]
Message-ID: <1438691297-29235-9-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1438691297-29235-1-git-send-email-geert+renesas@glider.be>
Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.
Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock. This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
---
v4:
- Add Reviewed-by,
v3:
- Use "CPG/MSTP Clock Domain" instead of "CPG Clock Domain",
v2:
- New.
---
arch/arm/boot/dts/r8a7779.dtsi | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index a2b5430d32575f99..6afa909865b52b71 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -173,6 +173,7 @@
reg = <0xffc70000 0x1000>;
interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -183,6 +184,7 @@
reg = <0xffc71000 0x1000>;
interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -193,6 +195,7 @@
reg = <0xffc72000 0x1000>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -203,6 +206,7 @@
reg = <0xffc73000 0x1000>;
interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -212,6 +216,7 @@
interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF0>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -221,6 +226,7 @@
interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF1>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -230,6 +236,7 @@
interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF2>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -239,6 +246,7 @@
interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF3>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -248,6 +256,7 @@
interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF4>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -257,6 +266,7 @@
interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF5>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -278,6 +288,7 @@
<0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#renesas,channels = <3>;
@@ -292,6 +303,7 @@
<0 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_TMU1>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#renesas,channels = <3>;
@@ -306,6 +318,7 @@
<0 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_TMU2>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#renesas,channels = <3>;
@@ -317,6 +330,7 @@
reg = <0xfc600000 0x2000>;
interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_SATA>;
+ power-domains = <&cpg_clocks>;
};
sdhi0: sd@ffe4c000 {
@@ -324,6 +338,7 @@
reg = <0xffe4c000 0x100>;
interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -332,6 +347,7 @@
reg = <0xffe4d000 0x100>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -340,6 +356,7 @@
reg = <0xffe4e000 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -348,6 +365,7 @@
reg = <0xffe4f000 0x100>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -358,6 +376,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -368,6 +387,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -378,6 +398,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -386,6 +407,7 @@
reg = <0 0xfff80000 0 0x40000>;
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_DU>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
ports {
@@ -427,6 +449,7 @@
#clock-cells = <1>;
clock-output-names = "plla", "z", "zs", "s",
"s1", "p", "b", "out";
+ #power-domain-cells = <0>;
};
/* Fixed factor clocks */
--
1.9.1
next prev parent reply other threads:[~2015-08-04 12:28 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-04 12:28 [PATCH v4 00/16] ARM: shmobile: Add CPG/MSTP Clock Domain Geert Uytterhoeven
2015-08-04 12:28 ` [PATCH v4 01/16] clk: shmobile: Add CPG/MSTP Clock Domain support Geert Uytterhoeven
2015-08-04 12:28 ` [PATCH v4 02/16] clk: shmobile: r8a7778: " Geert Uytterhoeven
2015-08-04 12:28 ` [PATCH v4 03/16] clk: shmobile: r8a7779: " Geert Uytterhoeven
2015-08-04 12:28 ` [PATCH v4 04/16] clk: shmobile: rcar-gen2: " Geert Uytterhoeven
2015-08-04 12:28 ` [PATCH v4 06/16] ARM: shmobile: r7s72100 dtsi: Add CPG/MSTP Clock Domain Geert Uytterhoeven
2015-08-04 12:28 ` [PATCH v4 07/16] ARM: shmobile: r8a7778 " Geert Uytterhoeven
2015-08-04 12:28 ` Geert Uytterhoeven [this message]
2015-08-04 12:28 ` [PATCH v4 09/16] ARM: shmobile: r8a7790 " Geert Uytterhoeven
2015-08-04 12:28 ` [PATCH v4 10/16] ARM: shmobile: r8a7791 " Geert Uytterhoeven
2015-08-04 12:28 ` [PATCH v4 11/16] ARM: shmobile: r8a7793 " Geert Uytterhoeven
2015-08-04 12:28 ` [PATCH v4 12/16] ARM: shmobile: r8a7794 " Geert Uytterhoeven
2015-08-04 12:28 ` [PATCH v4 13/16] drivers: sh: Disable legacy default PM Domain on emev2 Geert Uytterhoeven
[not found] ` <1438691297-29235-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2015-08-04 12:28 ` [PATCH v4 05/16] clk: shmobile: rz: Add CPG/MSTP Clock Domain support Geert Uytterhoeven
2015-08-04 12:28 ` [PATCH v4 14/16] drivers: sh: Disable PM runtime for multi-platform ARM with genpd Geert Uytterhoeven
2015-08-04 12:28 ` [PATCH v4 15/16] clk: shmobile: mstp: Consider "zb_clk" suitable for power management Geert Uytterhoeven
[not found] ` <1438691297-29235-16-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2015-08-04 13:20 ` Sergei Shtylyov
2015-09-17 8:45 ` Simon Horman
2015-09-17 8:53 ` Simon Horman
2015-09-17 22:24 ` Stephen Boyd
2015-09-18 0:12 ` Simon Horman
2015-08-04 12:28 ` [PATCH v4 16/16] ARM: shmobile: R-Mobile: Use CPG/MSTP Clock Domain attach/detach helpers Geert Uytterhoeven
2015-08-04 13:48 ` [PATCH v4 00/16] ARM: shmobile: Add CPG/MSTP Clock Domain Simon Horman
2015-08-05 0:55 ` Simon Horman
2015-08-05 6:58 ` Geert Uytterhoeven
[not found] ` <CAMuHMdUFjgVWBc0hdm_L0Z0Os1OT8H4NzwQyQTGZQt8Bu7-9PQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-08-06 0:50 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438691297-29235-9-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mturquette@baylibre.com \
--cc=rjw@rjwysocki.net \
--cc=sboyd@codeaurora.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).