From: Keerthy <j-keerthy-l0cyMroinI0@public.gmane.org>
To: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org,
johan-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
balbi-l0cyMroinI0@public.gmane.org,
nm-l0cyMroinI0@public.gmane.org,
paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org,
t-kristo-l0cyMroinI0@public.gmane.org,
j-keerthy-l0cyMroinI0@public.gmane.org
Subject: [PATCH 3/8] rtc: omap: Add external clock enabling support
Date: Wed, 5 Aug 2015 16:19:47 +0530 [thread overview]
Message-ID: <1438771792-12604-4-git-send-email-j-keerthy@ti.com> (raw)
In-Reply-To: <1438771792-12604-1-git-send-email-j-keerthy-l0cyMroinI0@public.gmane.org>
Based on the board property switch the source from internal
to external clock. Switching to external source is needed for
rtcwake to work in low power modes.
Signed-off-by: Keerthy <j-keerthy-l0cyMroinI0@public.gmane.org>
---
Documentation/devicetree/bindings/rtc/rtc-omap.txt | 2 ++
drivers/rtc/rtc-omap.c | 10 ++++++++++
2 files changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
index 4ba4dbd..0c44755 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
@@ -15,6 +15,7 @@ Required properties:
Optional properties:
- system-power-controller: whether the rtc is controlling the system power
through pmic_power_en
+- ext-clk-src: Whether the rtc can be sourced by external clock
Example:
@@ -25,4 +26,5 @@ rtc@1c23000 {
19>;
interrupt-parent = <&intc>;
system-power-controller;
+ ext-clk-src;
};
diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
index 8b6355f..cb8936a 100644
--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -107,6 +107,7 @@
/* OMAP_RTC_OSC_REG bit fields: */
#define OMAP_RTC_OSC_32KCLK_EN BIT(6)
+#define OMAP_RTC_OSC_SEL_32KCLK_SRC BIT(3)
/* OMAP_RTC_IRQWAKEEN bit fields: */
#define OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN BIT(1)
@@ -136,6 +137,7 @@ struct omap_rtc {
int irq_timer;
u8 interrupts_reg;
bool is_pmic_controller;
+ bool is_ext_src;
const struct omap_rtc_device_type *type;
};
@@ -540,6 +542,8 @@ static int omap_rtc_probe(struct platform_device *pdev)
rtc->is_pmic_controller = rtc->type->has_pmic_mode &&
of_property_read_bool(pdev->dev.of_node,
"system-power-controller");
+ rtc->is_ext_src = of_property_read_bool(pdev->dev.of_node,
+ "ext-clk-src");
} else {
id_entry = platform_get_device_id(pdev);
rtc->type = (void *)id_entry->driver_data;
@@ -627,6 +631,12 @@ static int omap_rtc_probe(struct platform_device *pdev)
if (reg != new_ctrl)
rtc_write(rtc, OMAP_RTC_CTRL_REG, new_ctrl);
+ if (rtc->is_ext_src) {
+ reg = rtc_read(rtc, OMAP_RTC_OSC_REG);
+ rtc_writel(rtc, OMAP_RTC_OSC_REG,
+ reg | OMAP_RTC_OSC_SEL_32KCLK_SRC);
+ }
+
rtc->type->lock(rtc);
device_init_wakeup(&pdev->dev, true);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-08-05 10:49 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-05 10:49 [PATCH 0/8] ARM: AM4372: Enable RTC Keerthy
[not found] ` <1438771792-12604-1-git-send-email-j-keerthy-l0cyMroinI0@public.gmane.org>
2015-08-05 10:49 ` [PATCH 1/8] ARM: dts: AM4372: Reorder the rtc compatible string Keerthy
[not found] ` <1438771792-12604-2-git-send-email-j-keerthy-l0cyMroinI0@public.gmane.org>
2015-08-05 15:31 ` Felipe Balbi
[not found] ` <20150805153148.GB12328-HgARHv6XitJaoMGHk7MhZQC/G2K4zDHf@public.gmane.org>
2015-08-05 15:51 ` Keerthy
[not found] ` <55C230E9.9010309-l0cyMroinI0@public.gmane.org>
2015-08-05 16:14 ` Felipe Balbi
[not found] ` <20150805161445.GF12328-HgARHv6XitJaoMGHk7MhZQC/G2K4zDHf@public.gmane.org>
2015-08-05 16:18 ` Keerthy
[not found] ` <55C23740.2080102-l0cyMroinI0@public.gmane.org>
2015-08-05 16:51 ` Felipe Balbi
[not found] ` <20150805165122.GH12328-HgARHv6XitJaoMGHk7MhZQC/G2K4zDHf@public.gmane.org>
2015-08-06 1:25 ` Keerthy
[not found] ` <55C2B7A5.5000400-l0cyMroinI0@public.gmane.org>
2015-08-06 14:16 ` Felipe Balbi
[not found] ` <20150806141618.GA19110-HgARHv6XitJaoMGHk7MhZQC/G2K4zDHf@public.gmane.org>
2015-08-06 16:48 ` Keerthy
[not found] ` <55C38FCC.1040306-l0cyMroinI0@public.gmane.org>
2015-08-07 2:47 ` Tony Lindgren
2015-08-06 13:33 ` Afzal Mohammed
2015-08-05 10:49 ` [PATCH 2/8] ARM: dts: am437x-gp-evm: Add regulator-always-on and regulator-boot-on for RTC DCDCs Keerthy
[not found] ` <1438771792-12604-3-git-send-email-j-keerthy-l0cyMroinI0@public.gmane.org>
2015-08-05 11:20 ` Tony Lindgren
2015-08-05 10:49 ` Keerthy [this message]
[not found] ` <1438771792-12604-4-git-send-email-j-keerthy-l0cyMroinI0@public.gmane.org>
2015-08-05 11:13 ` [PATCH 3/8] rtc: omap: Add external clock enabling support Tony Lindgren
[not found] ` <20150805111316.GI16878-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2015-08-05 11:41 ` Alexandre Belloni
[not found] ` <20150805114119.GF3486-m++hUPXGwpdeoWH0uzbU5w@public.gmane.org>
2015-08-05 11:43 ` Alexandre Belloni
[not found] ` <20150805114357.GG3486-m++hUPXGwpdeoWH0uzbU5w@public.gmane.org>
2015-08-05 12:01 ` Keerthy
[not found] ` <55C1FB12.1000208-l0cyMroinI0@public.gmane.org>
2015-08-05 12:35 ` Alexandre Belloni
[not found] ` <20150805123550.GH3486-m++hUPXGwpdeoWH0uzbU5w@public.gmane.org>
2015-08-06 2:09 ` Keerthy
[not found] ` <55C2C1F0.9040102-l0cyMroinI0@public.gmane.org>
2015-08-06 8:44 ` Alexandre Belloni
2015-08-06 9:36 ` Grygorii Strashko
[not found] ` <55C32AB6.7090509-l0cyMroinI0@public.gmane.org>
2015-08-06 9:47 ` Alexandre Belloni
[not found] ` <20150806094736.GM3486-m++hUPXGwpdeoWH0uzbU5w@public.gmane.org>
2015-08-06 9:51 ` Tony Lindgren
[not found] ` <20150806095105.GD4215-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2015-08-07 8:20 ` Keerthy
2015-08-05 10:49 ` [PATCH 4/8] ARM: dts: AM4372: Add external clock flag Keerthy
2015-08-05 10:49 ` [PATCH 5/8] ARM: AM43xx: Introduce a separate soc_is function for am438x series of SoCs Keerthy
[not found] ` <1438771792-12604-6-git-send-email-j-keerthy-l0cyMroinI0@public.gmane.org>
2015-08-05 11:16 ` Tony Lindgren
2015-08-05 10:49 ` [PATCH 6/8] ARM: dts: am43x-epos-evm: Add the am438 compatible string Keerthy
2015-08-05 10:49 ` [PATCH 7/8] ARM: AM43XX: HWMOD: Add rtc hwmod Keerthy
2015-08-05 10:49 ` [PATCH 8/8] ARM: dts: AM437x-gp-evm: Enable RTC Keerthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438771792-12604-4-git-send-email-j-keerthy@ti.com \
--to=j-keerthy-l0cymroini0@public.gmane.org \
--cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
--cc=alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=johan-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=nm-l0cyMroinI0@public.gmane.org \
--cc=paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org \
--cc=t-kristo-l0cyMroinI0@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).