From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Fainelli Subject: [PATCH 1/2] Documentation: dt: add Broadcom BCM7038 PWM controller binding Date: Thu, 6 Aug 2015 17:55:57 -0700 Message-ID: <1438908959-1578-2-git-send-email-f.fainelli@gmail.com> References: <1438908959-1578-1-git-send-email-f.fainelli@gmail.com> Return-path: In-Reply-To: <1438908959-1578-1-git-send-email-f.fainelli@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com, Florian Fainelli , Thierry Reding , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , "open list:PWM SUBSYSTEM" , "open list:OPEN FIRMWARE AND..." List-Id: devicetree@vger.kernel.org Add a binding documentation for the Broadcom BCM7038 PWM controller found in BCM7xxx chips. Signed-off-by: Florian Fainelli --- .../devicetree/bindings/pwm/brcm,bcm7038-pwm.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt diff --git a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt new file mode 100644 index 000000000000..8b9bc43b561e --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt @@ -0,0 +1,22 @@ +Broadcom BCM7038 PWM controller (BCM7xxx Set Top Box PWM controller) + +Required properties: + +- compatible: must be "brcm,bcm7038-pwm" +- reg: physical base address and length for this controller +- #pwm-cells: should be 2. See pwm.txt in this directory for a description + of the cells format. + +Optional properties: + +- clocks: a phandle to the reference clock for this block which is fed through + its internal variable clock frequency generator + +Example: + + pwm: pwm@f0408000 { + compatible = "brcm,bcm7038-pwm"; + reg = <0xf0408000 0x28>; + #pwm-cells = <2>; + clocks = <&upg_fixed>; + }; -- 2.1.0