From mboxrd@z Thu Jan 1 00:00:00 1970 From: Haibo Chen Subject: [PATCH v6 2/6] mmc: sdhci-esdhc-imx: add tuning-step setting support Date: Tue, 11 Aug 2015 19:38:27 +0800 Message-ID: <1439293111-21077-3-git-send-email-haibo.chen@freescale.com> References: <1439293111-21077-1-git-send-email-haibo.chen@freescale.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1439293111-21077-1-git-send-email-haibo.chen@freescale.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, shawnguo@kernel.org, kernel@pengutronix.de, linux@arm.linux.org.uk, ulf.hansson@linaro.org, aisheng.dong@freescale.com Cc: fabio.estevam@freescale.com, devicetree@vger.kernel.org, haibo.chen@freescale.com, linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, mkl@pengutronix.de, johan.derycke@barco.com, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org tuning-step is the delay cell steps in tuning procedure. The default value of tuning-step is 1. Some boards or cards need another value to pass the tuning procedure. For example, imx7d-sdb board need the tuning-step value as 2, otherwise it can't pass the tuning procedure. So this patch add the tuning-step setting in driver, so that user can set the tuning-step value in dts. Signed-off-by: Haibo Chen --- drivers/mmc/host/sdhci-esdhc-imx.c | 9 +++++++++ include/linux/platform_data/mmc-esdhc-imx.h | 1 + 2 files changed, 10 insertions(+) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index b8b7e88..298551d 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -75,6 +75,7 @@ #define ESDHC_STD_TUNING_EN (1 << 24) /* NOTE: the minimum valid tuning start tap for mx6sl is 1 */ #define ESDHC_TUNING_START_TAP 0x1 +#define ESDHC_TUNING_STEP_SHIFT 16 /* pinctrl state */ #define ESDHC_PINCTRL_STATE_100MHZ "state_100mhz" @@ -474,6 +475,7 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) } else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) { u32 v = readl(host->ioaddr + SDHCI_ACMD12_ERR); u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL); + u32 tuning_ctrl; if (val & SDHCI_CTRL_TUNED_CLK) { v |= ESDHC_MIX_CTRL_SMPCLK_SEL; } else { @@ -484,6 +486,11 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) if (val & SDHCI_CTRL_EXEC_TUNING) { v |= ESDHC_MIX_CTRL_EXE_TUNE; m |= ESDHC_MIX_CTRL_FBCLK_SEL; + tuning_ctrl = readl(host->ioaddr + ESDHC_TUNING_CTRL); + tuning_ctrl |= ESDHC_STD_TUNING_EN | ESDHC_TUNING_START_TAP; + if (imx_data->boarddata.tuning_step) + tuning_ctrl |= imx_data->boarddata.tuning_step << ESDHC_TUNING_STEP_SHIFT; + writel(tuning_ctrl, host->ioaddr + ESDHC_TUNING_CTRL); } else { v &= ~ESDHC_MIX_CTRL_EXE_TUNE; } @@ -963,6 +970,8 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, if (gpio_is_valid(boarddata->wp_gpio)) boarddata->wp_type = ESDHC_WP_GPIO; + of_property_read_u32(np, "fsl,tuning-step", &boarddata->tuning_step); + if (of_find_property(np, "no-1-8-v", NULL)) boarddata->support_vsel = false; else diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h index e1571ef..95ccab3 100644 --- a/include/linux/platform_data/mmc-esdhc-imx.h +++ b/include/linux/platform_data/mmc-esdhc-imx.h @@ -45,5 +45,6 @@ struct esdhc_platform_data { int max_bus_width; bool support_vsel; unsigned int delay_line; + unsigned int tuning_step; /* The delay cell steps in tuning procedure */ }; #endif /* __ASM_ARCH_IMX_ESDHC_H */ -- 1.9.1