devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
To: lee.jones@linaro.org
Cc: sameo@linux.intel.com, patches@opensource.wolfsonmicro.com,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH V4 2/3] mfd: arizona: factor out checking of jack detection state
Date: Wed, 12 Aug 2015 12:58:11 +0100	[thread overview]
Message-ID: <1439380692-7848-3-git-send-email-rf@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1439380692-7848-1-git-send-email-rf@opensource.wolfsonmicro.com>

Currently runtime_suspend will fully power off the codec if
the jack detection is not enabled. Not all future codecs will
have jack detection so to prepare for these codecs this patch
factors out the check so that it be called as needed in the
existing codec-specific switch cases.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
---
 drivers/mfd/arizona-core.c | 41 ++++++++++++++++++++++++++++++++---------
 1 file changed, 32 insertions(+), 9 deletions(-)

diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 33f3db4..43ca30b 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -489,6 +489,23 @@ static int arizona_connect_dcvdd(struct arizona *arizona)
 	return ret;
 }
 
+static int arizona_is_jack_det_active(struct arizona *arizona)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, &val);
+	if (ret) {
+		dev_err(arizona->dev,
+			"Failed to check jack det status: %d\n", ret);
+		return ret;
+	} else if (val & ARIZONA_JD1_ENA) {
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
 static int arizona_runtime_resume(struct device *dev)
 {
 	struct arizona *arizona = dev_get_drvdata(dev);
@@ -613,20 +630,18 @@ err:
 static int arizona_runtime_suspend(struct device *dev)
 {
 	struct arizona *arizona = dev_get_drvdata(dev);
-	unsigned int val;
+	unsigned int jd_active = 0;
 	int ret;
 
 	dev_dbg(arizona->dev, "Entering AoD mode\n");
 
-	ret = regmap_read(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, &val);
-	if (ret) {
-		dev_err(dev, "Failed to check jack det status: %d\n", ret);
-		return ret;
-	}
-
 	switch (arizona->type) {
 	case WM5110:
 	case WM8280:
+		jd_active = arizona_is_jack_det_active(arizona);
+		if (jd_active < 0)
+			return jd_active;
+
 		if (arizona->external_dcvdd) {
 			ret = arizona_isolate_dcvdd(arizona);
 			if (ret != 0)
@@ -648,13 +663,17 @@ static int arizona_runtime_suspend(struct device *dev)
 		}
 		break;
 	case WM5102:
+		jd_active = arizona_is_jack_det_active(arizona);
+		if (jd_active < 0)
+			return jd_active;
+
 		if (arizona->external_dcvdd) {
 			ret = arizona_isolate_dcvdd(arizona);
 			if (ret != 0)
 				return ret;
 		}
 
-		if (!(val & ARIZONA_JD1_ENA)) {
+		if (!jd_active) {
 			ret = regmap_write(arizona->regmap,
 					   ARIZONA_WRITE_SEQUENCER_CTRL_3, 0x0);
 			if (ret) {
@@ -666,6 +685,10 @@ static int arizona_runtime_suspend(struct device *dev)
 		}
 		break;
 	default:
+		jd_active = arizona_is_jack_det_active(arizona);
+		if (jd_active < 0)
+			return jd_active;
+
 		if (arizona->external_dcvdd) {
 			ret = arizona_isolate_dcvdd(arizona);
 			if (ret != 0)
@@ -679,7 +702,7 @@ static int arizona_runtime_suspend(struct device *dev)
 	regulator_disable(arizona->dcvdd);
 
 	/* Allow us to completely power down if no jack detection */
-	if (!(val & ARIZONA_JD1_ENA)) {
+	if (!jd_active) {
 		dev_dbg(arizona->dev, "Fully powering off\n");
 
 		arizona->has_fully_powered_off = true;
-- 
1.9.1

  parent reply	other threads:[~2015-08-12 11:58 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-12 11:58 [PATCH V4 0/3] mfd: arizona: Support Cirrus Logic CS47L24 and WM1831 Richard Fitzgerald
2015-08-12 11:58 ` [PATCH V4 1/3] mfd: arizona: factor out DCVDD isolation control Richard Fitzgerald
     [not found]   ` <1439380692-7848-2-git-send-email-rf-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2015-08-12 14:42     ` Lee Jones
2015-08-12 11:58 ` Richard Fitzgerald [this message]
     [not found]   ` <1439380692-7848-3-git-send-email-rf-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2015-08-12 14:45     ` [PATCH V4 2/3] mfd: arizona: factor out checking of jack detection state Lee Jones
2015-08-12 11:58 ` [PATCH V4 3/3] mfd: arizona: Support Cirrus Logic CS47L24 and WM1831 Richard Fitzgerald
2015-08-14  6:40   ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1439380692-7848-3-git-send-email-rf@opensource.wolfsonmicro.com \
    --to=rf@opensource.wolfsonmicro.com \
    --cc=devicetree@vger.kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.wolfsonmicro.com \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).