devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
To: linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Graham Moore
	<grmoore-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>,
	Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>,
	Alan Tull
	<atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>,
	Brian Norris
	<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
	Dinh Nguyen
	<dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>,
	Vikas MANOCHA <vikas.manocha-qxv4g6HH51o@public.gmane.org>,
	Yves Vandervennet
	<yvanderv-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH V7 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.
Date: Fri, 14 Aug 2015 05:28:11 +0200	[thread overview]
Message-ID: <1439522892-7524-1-git-send-email-marex@denx.de> (raw)

From: Graham Moore <grmoore-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>

Add binding document for the Cadence QSPI controller.

Signed-off-by: Graham Moore <grmoore-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Cc: Alan Tull <atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
Cc: Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
Cc: Dinh Nguyen <dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
Cc: Graham Moore <grmoore-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
Cc: Vikas MANOCHA <vikas.manocha-qxv4g6HH51o@public.gmane.org>
Cc: Yves Vandervennet <yvanderv-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 .../devicetree/bindings/mtd/cadence_quadspi.txt    | 50 ++++++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/cadence_quadspi.txt

V2: Add cdns prefix to driver-specific bindings.
V3: Use existing property "is-decoded-cs" instead of creating a
    duplicate, "ext-decoder". Timing parameters are in nanoseconds,
    not master reference clocks. Remove bus-num completely.
V4: Add new properties fifo-width and trigger-address
V7: - Prefix all of the Cadence-specific properties with cdns prefix,
      those are in particular "cdns,is-decoded-cs", "cdns,fifo-depth",
      "cdns,fifo-width", "cdns,trigger-address".
    - Drop bogus properties which were not used and were incorrect.

diff --git a/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
new file mode 100644
index 0000000..ebaf1fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
@@ -0,0 +1,50 @@
+* Cadence Quad SPI controller
+
+Required properties:
+- compatible : Should be "cdns,qspi-nor".
+- reg : Contains two entries, each of which is a tuple consisting of a
+	physical address and length.  The first entry is the address and
+	length of the controller register set.  The second entry is the
+	address and length of the QSPI Controller data area.
+- interrupts : Unit interrupt specifier for the controller interrupt.
+- clocks : phandle to the Quad SPI clock.
+- cdns,fifo-depth : Size of the data FIFO in words.
+- cdns,fifo-width: Bus width of the data FIFO in bytes.
+- cdns,trigger-address : 32-bit indirect AHB trigger address.
+
+Optional properties:
+- cdns,is-decoded-cs : Flag to indicate whether decoder is used or not.
+
+Optional subnodes:
+Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional
+custom properties:
+- cdns,read-delay : Delay for read capture logic, in clock cycles
+- cdns,tshsl-ns : Delay in nanoseconds for the length that the master mode chip select outputs are de-asserted between transactions.
+- cdns,tsd2d-ns : Delay in nanoseconds between one chip select being de-activated and the activation of another.
+- cdns,tchsh-ns : Delay in nanoseconds between last bit of current transaction and deasserting the device chip select (qspi_n_ss_out).
+- cdns,tslch-ns : Delay in nanoseconds between setting qspi_n_ss_out low and first bit transfer.
+
+Example:
+
+	qspi: spi@ff705000 {
+		compatible = "cdns,qspi-nor";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0xff705000 0x1000>,
+		      <0xffa00000 0x1000>;
+		interrupts = <0 151 4>;
+		clocks = <&qspi_clk>;
+		cdns,is-decoded-cs;
+		cdns,fifo-depth = <128>;
+		cdns,fifo-width = <4>;
+		cdns,trigger-address = <0x00000000>;
+
+		flash0: n25q00@0 {
+			...
+			cdns,read-delay = <4>;
+			cdns,tshsl-ns = <50>;
+			cdns,tsd2d-ns = <50>;
+			cdns,tchsh-ns = <4>;
+			cdns,tslch-ns = <4>;
+		};
+	};
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2015-08-14  3:28 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-14  3:28 Marek Vasut [this message]
     [not found] ` <1439522892-7524-1-git-send-email-marex-ynQEQJNshbs@public.gmane.org>
2015-08-14  3:28   ` [PATCH V7 2/2] mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller Marek Vasut
     [not found]     ` <1439522892-7524-2-git-send-email-marex-ynQEQJNshbs@public.gmane.org>
2015-08-14  3:32       ` Marek Vasut
     [not found]         ` <201508140532.34935.marex-ynQEQJNshbs@public.gmane.org>
2015-08-18  2:47           ` Brian Norris
2015-08-21  5:32             ` Marek Vasut
2015-08-18  2:34       ` vikas
2015-08-18 19:17         ` Graham Moore
     [not found]           ` <55D384D6.9040303-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2015-08-18 20:35             ` vikas
     [not found]         ` <55D299CD.2070809-qxv4g6HH51o@public.gmane.org>
2015-08-21  4:04           ` Marek Vasut
     [not found]             ` <201508210604.30272.marex-ynQEQJNshbs@public.gmane.org>
2015-08-21  7:09               ` Vikas MANOCHA
2015-08-18  2:35   ` [PATCH V7 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver vikas
     [not found]     ` <55D29A0B.20408-qxv4g6HH51o@public.gmane.org>
2015-08-18  4:47       ` Marek Vasut
     [not found]         ` <201508180647.30119.marex-ynQEQJNshbs@public.gmane.org>
2015-08-18  5:48           ` Vikas MANOCHA
2015-08-18 19:03             ` Graham Moore
     [not found]               ` <55D3819D.1040009-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2015-08-18 20:18                 ` vikas
     [not found]                   ` <55D39319.70108-qxv4g6HH51o@public.gmane.org>
2015-08-20  4:03                     ` Marek Vasut
     [not found]                       ` <201508200603.19962.marex-ynQEQJNshbs@public.gmane.org>
2015-08-20 16:06                         ` vikas
     [not found]                           ` <55D5FB19.9010402-qxv4g6HH51o@public.gmane.org>
2015-08-21  3:46                             ` Marek Vasut
     [not found]                               ` <201508210546.28932.marex-ynQEQJNshbs@public.gmane.org>
2015-08-21  7:00                                 ` Vikas MANOCHA

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1439522892-7524-1-git-send-email-marex@denx.de \
    --to=marex-ynqeqjnshbs@public.gmane.org \
    --cc=atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org \
    --cc=computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org \
    --cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
    --cc=grmoore-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org \
    --cc=linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=vikas.manocha-qxv4g6HH51o@public.gmane.org \
    --cc=yvanderv-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).