From: Scott Wood <scottwood@freescale.com>
To: Mike Turquette <mturquette@linaro.org>,
Tang Yuantian <Yuantian.Tang@freescale.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
Liberman Igal-B31950 <Igal.Liberman@freescale.com>,
Bucur Madalin-Cristian-B32716 <madalin.bucur@freescale.com>,
linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, devicetree@vger.kernel.org,
Scott Wood <scottwood@freescale.com>
Subject: [PATCH v2 5/5] powerpc/fsl: Use new clockgen binding
Date: Sat, 15 Aug 2015 01:41:22 -0500 [thread overview]
Message-ID: <1439620882-20449-6-git-send-email-scottwood@freescale.com> (raw)
In-Reply-To: <1439620882-20449-1-git-send-email-scottwood@freescale.com>
The driver retains compatibility with old device trees, but we don't
want the old nodes lying around to be copied, or used as a reference
(some of the mux options are incorrect), or even just being clutter.
We will also need the #clock-cells in the clockgen node in order to
add fman nodes.
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
v2: non-RFC
arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi | 4 +-
arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi | 8 +--
arch/powerpc/boot/dts/fsl/b4si-post.dtsi | 15 ------
arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 18 -------
arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi | 8 +--
arch/powerpc/boot/dts/fsl/p3041si-post.dtsi | 18 -------
arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi | 8 +--
arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 70 --------------------------
arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi | 16 +++---
arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi | 4 +-
arch/powerpc/boot/dts/fsl/p5040si-post.dtsi | 18 -------
arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi | 8 +--
arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi | 50 +-----------------
arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 33 +-----------
arch/powerpc/boot/dts/fsl/t1023si-post.dtsi | 16 ------
arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi | 4 +-
arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 44 ----------------
arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi | 8 +--
arch/powerpc/boot/dts/fsl/t2081si-post.dtsi | 22 --------
arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi | 8 +--
arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 61 ----------------------
arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi | 24 ++++-----
22 files changed, 54 insertions(+), 411 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
index 338af7e..9cfeaef 100644
--- a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
@@ -64,14 +64,14 @@
cpu0: PowerPC,e6500@0 {
device_type = "cpu";
reg = <0 1>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2>;
fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2>;
fsl,portid-mapping = <0x80000000>;
};
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
index 1948f73..bc914f2 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
@@ -64,28 +64,28 @@
cpu0: PowerPC,e6500@0 {
device_type = "cpu";
reg = <0 1>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2>;
fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2>;
fsl,portid-mapping = <0x80000000>;
};
cpu2: PowerPC,e6500@4 {
device_type = "cpu";
reg = <4 5>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2>;
fsl,portid-mapping = <0x80000000>;
};
cpu3: PowerPC,e6500@6 {
device_type = "cpu";
reg = <6 7>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2>;
fsl,portid-mapping = <0x80000000>;
};
diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
index 603910a..004477d 100644
--- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
@@ -398,21 +398,6 @@
};
/include/ "qoriq-clockgen2.dtsi"
- clockgen: global-utilities@e1000 {
- compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0";
- reg = <0xe1000 0x1000>;
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>;
- clock-names = "pll0", "pll0-div2", "pll0-div4",
- "pll1", "pll1-div2", "pll1-div4";
- clock-output-names = "cmux0";
- };
- };
rcpm: global-utilities@e2000 {
compatible = "fsl,b4-rcpm", "fsl,qoriq-rcpm-2.0";
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index 04ad177..9c16a16 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -327,24 +327,6 @@
/include/ "qoriq-clockgen1.dtsi"
global-utilities@e1000 {
compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
-
- mux2: mux2@40 {
- #clock-cells = <0>;
- reg = <0x40 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux2";
- };
-
- mux3: mux3@60 {
- #clock-cells = <0>;
- reg = <0x60 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux3";
- };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
index b1ea147..0babd84 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
@@ -81,7 +81,7 @@
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_0>;
fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
@@ -91,7 +91,7 @@
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
@@ -101,7 +101,7 @@
cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
- clocks = <&mux2>;
+ clocks = <&clockgen 1 2>;
next-level-cache = <&L2_2>;
fsl,portid-mapping = <0x20000000>;
L2_2: l2-cache {
@@ -111,7 +111,7 @@
cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
- clocks = <&mux3>;
+ clocks = <&clockgen 1 3>;
next-level-cache = <&L2_3>;
fsl,portid-mapping = <0x10000000>;
L2_3: l2-cache {
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
index 2cab18a..eeefc09 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -354,24 +354,6 @@
/include/ "qoriq-clockgen1.dtsi"
global-utilities@e1000 {
compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
-
- mux2: mux2@40 {
- #clock-cells = <0>;
- reg = <0x40 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux2";
- };
-
- mux3: mux3@60 {
- #clock-cells = <0>;
- reg = <0x60 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux3";
- };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
index dc5f4b3..2b331b2 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
@@ -82,7 +82,7 @@
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_0>;
fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
@@ -92,7 +92,7 @@
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
@@ -102,7 +102,7 @@
cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
- clocks = <&mux2>;
+ clocks = <&clockgen 1 2>;
next-level-cache = <&L2_2>;
fsl,portid-mapping = <0x20000000>;
L2_2: l2-cache {
@@ -112,7 +112,7 @@
cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
- clocks = <&mux3>;
+ clocks = <&clockgen 1 3>;
next-level-cache = <&L2_3>;
fsl,portid-mapping = <0x10000000>;
L2_3: l2-cache {
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
index dfc76bc..b4403dd 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -374,76 +374,6 @@
/include/ "qoriq-clockgen1.dtsi"
global-utilities@e1000 {
compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
-
- pll2: pll2@840 {
- #clock-cells = <1>;
- reg = <0x840 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll2", "pll2-div2";
- };
-
- pll3: pll3@860 {
- #clock-cells = <1>;
- reg = <0x860 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll3", "pll3-div2";
- };
-
- mux2: mux2@40 {
- #clock-cells = <0>;
- reg = <0x40 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux2";
- };
-
- mux3: mux3@60 {
- #clock-cells = <0>;
- reg = <0x60 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux3";
- };
-
- mux4: mux4@80 {
- #clock-cells = <0>;
- reg = <0x80 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
- clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
- clock-output-names = "cmux4";
- };
-
- mux5: mux5@a0 {
- #clock-cells = <0>;
- reg = <0xa0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
- clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
- clock-output-names = "cmux5";
- };
-
- mux6: mux6@c0 {
- #clock-cells = <0>;
- reg = <0xc0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
- clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
- clock-output-names = "cmux6";
- };
-
- mux7: mux7@e0 {
- #clock-cells = <0>;
- reg = <0xe0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
- clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
- clock-output-names = "cmux7";
- };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
index 38bde09..a3ea73c 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
@@ -81,7 +81,7 @@
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_0>;
fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
@@ -91,7 +91,7 @@
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
@@ -101,7 +101,7 @@
cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
- clocks = <&mux2>;
+ clocks = <&clockgen 1 2>;
next-level-cache = <&L2_2>;
fsl,portid-mapping = <0x20000000>;
L2_2: l2-cache {
@@ -111,7 +111,7 @@
cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
- clocks = <&mux3>;
+ clocks = <&clockgen 1 3>;
next-level-cache = <&L2_3>;
fsl,portid-mapping = <0x10000000>;
L2_3: l2-cache {
@@ -121,7 +121,7 @@
cpu4: PowerPC,e500mc@4 {
device_type = "cpu";
reg = <4>;
- clocks = <&mux4>;
+ clocks = <&clockgen 1 4>;
next-level-cache = <&L2_4>;
fsl,portid-mapping = <0x08000000>;
L2_4: l2-cache {
@@ -131,7 +131,7 @@
cpu5: PowerPC,e500mc@5 {
device_type = "cpu";
reg = <5>;
- clocks = <&mux5>;
+ clocks = <&clockgen 1 5>;
next-level-cache = <&L2_5>;
fsl,portid-mapping = <0x04000000>;
L2_5: l2-cache {
@@ -141,7 +141,7 @@
cpu6: PowerPC,e500mc@6 {
device_type = "cpu";
reg = <6>;
- clocks = <&mux6>;
+ clocks = <&clockgen 1 6>;
next-level-cache = <&L2_6>;
fsl,portid-mapping = <0x02000000>;
L2_6: l2-cache {
@@ -151,7 +151,7 @@
cpu7: PowerPC,e500mc@7 {
device_type = "cpu";
reg = <7>;
- clocks = <&mux7>;
+ clocks = <&clockgen 1 7>;
next-level-cache = <&L2_7>;
fsl,portid-mapping = <0x01000000>;
L2_7: l2-cache {
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
index 1cc61e1..f3b2188 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -88,7 +88,7 @@
cpu0: PowerPC,e5500@0 {
device_type = "cpu";
reg = <0>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_0>;
fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
@@ -98,7 +98,7 @@
cpu1: PowerPC,e5500@1 {
device_type = "cpu";
reg = <1>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
index 6d21452..8ba35ca 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
@@ -319,24 +319,6 @@
/include/ "qoriq-clockgen1.dtsi"
global-utilities@e1000 {
compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0";
-
- mux2: mux2@40 {
- #clock-cells = <0>;
- reg = <0x40 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux2";
- };
-
- mux3: mux3@60 {
- #clock-cells = <0>;
- reg = <0x60 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux3";
- };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
index b048a2b..a32e256 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
@@ -81,7 +81,7 @@
cpu0: PowerPC,e5500@0 {
device_type = "cpu";
reg = <0>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_0>;
fsl,portid-mapping = <0x80000000>;
L2_0: l2-cache {
@@ -91,7 +91,7 @@
cpu1: PowerPC,e5500@1 {
device_type = "cpu";
reg = <1>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x40000000>;
L2_1: l2-cache {
@@ -101,7 +101,7 @@
cpu2: PowerPC,e5500@2 {
device_type = "cpu";
reg = <2>;
- clocks = <&mux2>;
+ clocks = <&clockgen 1 2>;
next-level-cache = <&L2_2>;
fsl,portid-mapping = <0x20000000>;
L2_2: l2-cache {
@@ -111,7 +111,7 @@
cpu3: PowerPC,e5500@3 {
device_type = "cpu";
reg = <3>;
- clocks = <&mux3>;
+ clocks = <&clockgen 1 3>;
next-level-cache = <&L2_3>;
fsl,portid-mapping = <0x10000000>;
L2_3: l2-cache {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
index 4ece1ed..463c1ed 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
@@ -32,54 +32,8 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-global-utilities@e1000 {
+clockgen: global-utilities@e1000 {
compatible = "fsl,qoriq-clockgen-1.0";
- ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-1.0", "fixed-clock";
- clock-output-names = "sysclk";
- };
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2";
- };
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2";
- };
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux0";
- };
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux1";
- };
- platform_pll: platform-pll@c00 {
- #clock-cells = <1>;
- reg = <0xc00 0x4>;
- compatible = "fsl,qoriq-platform-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "platform-pll", "platform-pll-div2";
- };
+ #clock-cells = <2>;
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
index 48e0b6e..0361050 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
@@ -32,37 +32,8 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-global-utilities@e1000 {
+clockgen: global-utilities@e1000 {
compatible = "fsl,qoriq-clockgen-2.0";
- ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-2.0", "fixed-clock";
- clock-output-names = "sysclk";
- };
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2", "pll0-div4";
- };
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2", "pll1-div4";
- };
- platform_pll: platform-pll@c00 {
- #clock-cells = <1>;
- reg = <0xc00 0x4>;
- compatible = "fsl,qoriq-platform-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "platform-pll", "platform-pll-div2";
- };
+ #clock-cells = <2>;
};
diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
index df1f068..61aea79 100644
--- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
@@ -242,22 +242,6 @@
/include/ "qoriq-clockgen2.dtsi"
global-utilities@e1000 {
compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0";
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 4>;
- compatible = "fsl,core-mux-clock";
- clocks = <&pll0 0>, <&pll0 1>;
- clock-names = "pll0_0", "pll0_1";
- clock-output-names = "cmux0";
- };
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 4>;
- compatible = "fsl,core-mux-clock";
- clocks = <&pll0 0>, <&pll0 1>;
- clock-names = "pll0_0", "pll0_1";
- clock-output-names = "cmux1";
- };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
index 1f1a9f8..cc52fa4 100644
--- a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
@@ -68,7 +68,7 @@
cpu0: PowerPC,e5500@0 {
device_type = "cpu";
reg = <0>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
@@ -77,7 +77,7 @@
cpu1: PowerPC,e5500@1 {
device_type = "cpu";
reg = <1>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_2>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index 9e9f7e2..b738a95 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -423,50 +423,6 @@
/include/ "qoriq-clockgen2.dtsi"
global-utilities@e1000 {
compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>;
- clock-names = "pll0", "pll0-div2", "pll1-div4",
- "pll1", "pll1-div2", "pll1-div4";
- clock-output-names = "cmux0";
- };
-
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>;
- clock-names = "pll0", "pll0-div2", "pll1-div4",
- "pll1", "pll1-div2", "pll1-div4";
- clock-output-names = "cmux1";
- };
-
- mux2: mux2@40 {
- #clock-cells = <0>;
- reg = <0x40 4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>;
- clock-names = "pll0", "pll0-div2", "pll1-div4",
- "pll1", "pll1-div2", "pll1-div4";
- clock-output-names = "cmux2";
- };
-
- mux3: mux3@60 {
- #clock-cells = <0>;
- reg = <0x60 4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>;
- clock-names = "pll0_0", "pll0_1", "pll0_2",
- "pll1_0", "pll1_1", "pll1_2";
- clock-output-names = "cmux3";
- };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
index bbb7025..74538ae 100644
--- a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
@@ -67,7 +67,7 @@
cpu0: PowerPC,e5500@0 {
device_type = "cpu";
reg = <0>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
@@ -76,7 +76,7 @@
cpu1: PowerPC,e5500@1 {
device_type = "cpu";
reg = <1>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_2>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
@@ -85,7 +85,7 @@
cpu2: PowerPC,e5500@2 {
device_type = "cpu";
reg = <2>;
- clocks = <&mux2>;
+ clocks = <&clockgen 1 2>;
next-level-cache = <&L2_3>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
@@ -94,7 +94,7 @@
cpu3: PowerPC,e5500@3 {
device_type = "cpu";
reg = <3>;
- clocks = <&mux3>;
+ clocks = <&clockgen 1 3>;
next-level-cache = <&L2_4>;
L2_4: l2-cache {
next-level-cache = <&cpc>;
diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
index 32c790a..f836bc3 100644
--- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
@@ -535,28 +535,6 @@
/include/ "qoriq-clockgen2.dtsi"
global-utilities@e1000 {
compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0";
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>;
- clock-names = "pll0", "pll0-div2", "pll0-div4",
- "pll1", "pll1-div2", "pll1-div4";
- clock-output-names = "cmux0";
- };
-
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>;
- clock-names = "pll0", "pll0-div2", "pll0-div4",
- "pll1", "pll1-div2", "pll1-div4";
- clock-output-names = "cmux1";
- };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
index e71ceb0..1b4139f 100644
--- a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
@@ -70,28 +70,28 @@
cpu0: PowerPC,e6500@0 {
device_type = "cpu";
reg = <0 1>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu2: PowerPC,e6500@4 {
device_type = "cpu";
reg = <4 5>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu3: PowerPC,e6500@6 {
device_type = "cpu";
reg = <6 7>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
index d806360..c6a51ad 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -950,67 +950,6 @@
/include/ "qoriq-clockgen2.dtsi"
global-utilities@e1000 {
compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
-
- pll2: pll2@840 {
- #clock-cells = <1>;
- reg = <0x840 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll2", "pll2-div2", "pll2-div4";
- };
-
- pll3: pll3@860 {
- #clock-cells = <1>;
- reg = <0x860 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll3", "pll3-div2", "pll3-div4";
- };
-
- pll4: pll4@880 {
- #clock-cells = <1>;
- reg = <0x880 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll4", "pll4-div2", "pll4-div4";
- };
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>,
- <&pll2 0>, <&pll2 1>, <&pll2 2>;
- clock-names = "pll0", "pll0-div2", "pll0-div4",
- "pll1", "pll1-div2", "pll1-div4",
- "pll2", "pll2-div2", "pll2-div4";
- clock-output-names = "cmux0";
- };
-
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 0x4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
- <&pll1 0>, <&pll1 1>, <&pll1 2>,
- <&pll2 0>, <&pll2 1>, <&pll2 2>;
- clock-names = "pll0", "pll0-div2", "pll0-div4",
- "pll1", "pll1-div2", "pll1-div4",
- "pll2", "pll2-div2", "pll2-div4";
- clock-output-names = "cmux1";
- };
-
- mux2: mux2@40 {
- #clock-cells = <0>;
- reg = <0x40 0x4>;
- compatible = "fsl,qoriq-core-mux-2.0";
- clocks = <&pll3 0>, <&pll3 1>, <&pll3 2>,
- <&pll4 0>, <&pll4 1>, <&pll4 2>;
- clock-names = "pll3", "pll3-div2", "pll3-div4",
- "pll4", "pll4-div2", "pll4-div4";
- clock-output-names = "cmux2";
- };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
index 261a3abb..ae6752d 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
@@ -68,84 +68,84 @@
cpu0: PowerPC,e6500@0 {
device_type = "cpu";
reg = <0 1>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu2: PowerPC,e6500@4 {
device_type = "cpu";
reg = <4 5>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu3: PowerPC,e6500@6 {
device_type = "cpu";
reg = <6 7>;
- clocks = <&mux0>;
+ clocks = <&clockgen 1 0>;
next-level-cache = <&L2_1>;
fsl,portid-mapping = <0x80000000>;
};
cpu4: PowerPC,e6500@8 {
device_type = "cpu";
reg = <8 9>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_2>;
fsl,portid-mapping = <0x40000000>;
};
cpu5: PowerPC,e6500@10 {
device_type = "cpu";
reg = <10 11>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_2>;
fsl,portid-mapping = <0x40000000>;
};
cpu6: PowerPC,e6500@12 {
device_type = "cpu";
reg = <12 13>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_2>;
fsl,portid-mapping = <0x40000000>;
};
cpu7: PowerPC,e6500@14 {
device_type = "cpu";
reg = <14 15>;
- clocks = <&mux1>;
+ clocks = <&clockgen 1 1>;
next-level-cache = <&L2_2>;
fsl,portid-mapping = <0x40000000>;
};
cpu8: PowerPC,e6500@16 {
device_type = "cpu";
reg = <16 17>;
- clocks = <&mux2>;
+ clocks = <&clockgen 1 2>;
next-level-cache = <&L2_3>;
fsl,portid-mapping = <0x20000000>;
};
cpu9: PowerPC,e6500@18 {
device_type = "cpu";
reg = <18 19>;
- clocks = <&mux2>;
+ clocks = <&clockgen 1 2>;
next-level-cache = <&L2_3>;
fsl,portid-mapping = <0x20000000>;
};
cpu10: PowerPC,e6500@20 {
device_type = "cpu";
reg = <20 21>;
- clocks = <&mux2>;
+ clocks = <&clockgen 1 2>;
next-level-cache = <&L2_3>;
fsl,portid-mapping = <0x20000000>;
};
cpu11: PowerPC,e6500@22 {
device_type = "cpu";
reg = <22 23>;
- clocks = <&mux2>;
+ clocks = <&clockgen 1 2>;
next-level-cache = <&L2_3>;
fsl,portid-mapping = <0x20000000>;
};
--
2.1.4
prev parent reply other threads:[~2015-08-15 6:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-15 6:41 [PATCH v2 0/5] clk: qoriq: Move chip-specific knowledge into driver Scott Wood
2015-08-15 6:41 ` [PATCH v2 1/5] cpufreq: qoriq: Don't look at clock implementation details Scott Wood
2015-08-15 6:41 ` [PATCH v2 2/5] powerpc/fsl: Move fsl_guts.h out of arch/powerpc Scott Wood
2015-08-15 6:41 ` [PATCH v2 3/5] clk: qoriq: Move chip-specific knowledge into driver Scott Wood
2015-08-15 6:41 ` [PATCH v2 4/5] cpufreq: qoriq: Remove frequency masking and minimum Scott Wood
2015-08-15 6:41 ` Scott Wood [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439620882-20449-6-git-send-email-scottwood@freescale.com \
--to=scottwood@freescale.com \
--cc=Igal.Liberman@freescale.com \
--cc=Yuantian.Tang@freescale.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=madalin.bucur@freescale.com \
--cc=mturquette@linaro.org \
--cc=rjw@rjwysocki.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).