From: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
To: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
Viresh Kumar <viresh.kumar@linaro.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Mark Rutland <mark.rutland@arm.com>
Cc: Michael Turquette <mturquette@baylibre.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
linaro-kernel@lists.linaro.org,
linux-mediatek@lists.infradead.org
Subject: [RESEND PATCH 1/3 v6] dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings
Date: Mon, 17 Aug 2015 17:24:23 +0800 [thread overview]
Message-ID: <1439803465-19683-2-git-send-email-pi-cheng.chen@linaro.org> (raw)
In-Reply-To: <1439803465-19683-1-git-send-email-pi-cheng.chen@linaro.org>
This patch adds the clock and regulator consumer properties part of
document for CPU DVFS clocks on Mediatek MT8173 SoC.
Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
.../devicetree/bindings/clock/mt8173-cpu-dvfs.txt | 83 ++++++++++++++++++++++
1 file changed, 83 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
diff --git a/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
new file mode 100644
index 0000000..52b457c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
@@ -0,0 +1,83 @@
+Device Tree Clock bindins for CPU DVFS of Mediatek MT8173 SoC
+
+Required properties:
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
+- clock-names: Should contain the following:
+ "cpu" - The multiplexer for clock input of CPU cluster.
+ "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock
+ source (usually MAINPLL) when the original CPU PLL is under
+ transition and not stable yet.
+ Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
+ generic clock consumer properties.
+- proc-supply: Regulator for Vproc of CPU cluster.
+
+Optional properties:
+- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
+ needs to do "voltage tracking" to step by step scale up/down Vproc and
+ Vsram to fit SoC specific needs. When absent, the voltage scaling
+ flow is handled by hardware, hence no software "voltage tracking" is
+ needed.
+
+Example:
+--------
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x000>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&infracfg CLK_INFRA_CA53SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x001>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&infracfg CLK_INFRA_CA53SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ };
+
+ cpu2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x100>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&infracfg CLK_INFRA_CA57SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ };
+
+ cpu3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x101>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&infracfg CLK_INFRA_CA57SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ };
+
+ &cpu0 {
+ proc-supply = <&mt6397_vpca15_reg>;
+ };
+
+ &cpu1 {
+ proc-supply = <&mt6397_vpca15_reg>;
+ };
+
+ &cpu2 {
+ proc-supply = <&da9211_vcpu_reg>;
+ sram-supply = <&mt6397_vsramca7_reg>;
+ };
+
+ &cpu3 {
+ proc-supply = <&da9211_vcpu_reg>;
+ sram-supply = <&mt6397_vsramca7_reg>;
+ };
--
1.9.1
next prev parent reply other threads:[~2015-08-17 9:24 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-17 9:24 [RESEND PATCH 0/3 v6] Add Mediatek MT8173 cpufreq driver Pi-Cheng Chen
2015-08-17 9:24 ` Pi-Cheng Chen [this message]
2015-08-17 9:24 ` [RESEND PATCH 2/3 v6] cpufreq: mediatek: Add " Pi-Cheng Chen
[not found] ` <1439803465-19683-3-git-send-email-pi-cheng.chen-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-08-18 10:09 ` Bartlomiej Zolnierkiewicz
2015-08-18 10:24 ` Viresh Kumar
2015-08-19 2:05 ` [PATCH v7 2/3] " Pi-Cheng Chen
[not found] ` <1439949906-22177-1-git-send-email-pi-cheng.chen-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-08-19 5:41 ` Viresh Kumar
[not found] ` <1439803465-19683-1-git-send-email-pi-cheng.chen-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-08-17 9:24 ` [RESEND PATCH 3/3 v6] arm64: dts: mt8173: mt8173-evb: Add mt8173 cpufreq driver support Pi-Cheng Chen
2015-08-25 2:10 ` [RESEND PATCH 0/3 v6] Add Mediatek MT8173 cpufreq driver Pi-Cheng Chen
2015-08-25 23:01 ` Rafael J. Wysocki
2015-08-26 1:25 ` Pi-Cheng Chen
2015-08-26 2:16 ` Viresh Kumar
2015-08-26 6:53 ` Pi-Cheng Chen
2015-08-28 14:06 ` Rafael J. Wysocki
2015-09-02 6:45 ` Daniel Kurtz
2015-09-02 17:23 ` Matthias Brugger
2016-04-21 10:26 ` Matthias Brugger
2016-04-21 10:58 ` Matthias Brugger
2016-04-21 11:37 ` Eddie Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439803465-19683-2-git-send-email-pi-cheng.chen@linaro.org \
--to=pi-cheng.chen@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linaro-kernel@lists.linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=mturquette@baylibre.com \
--cc=rjw@rjwysocki.net \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).