devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Adrian Alonso <aalonso@freescale.com>
To: linux-arm-kernel@lists.infradead.org, shawn.guo@linaro.org,
	shawnguo@kernel.org, linus.walleij@linaro.org, lznuaa@gmail.com
Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	robh+dt@kernel.org, Anson.Huang@freescale.com,
	Frank.Li@freescale.com, yibin.gong@freescale.com,
	nitin.garg@freescale.com
Subject: [PATCH 5/8] pinctrl: freescale: imx: add shared input select reg support
Date: Tue, 18 Aug 2015 10:48:56 -0500	[thread overview]
Message-ID: <1439912939-17535-5-git-send-email-aalonso@freescale.com> (raw)
In-Reply-To: <1439912939-17535-1-git-send-email-aalonso@freescale.com>

- Add shared input select register support
- imx7d has two iomux controllers iomuxc and iomuxc-lpsr
  which share select_input register for daisy chain settings

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
---
 drivers/pinctrl/freescale/pinctrl-imx.c | 28 +++++++++++++++++++++++++++-
 drivers/pinctrl/freescale/pinctrl-imx.h |  1 +
 2 files changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c
index 0440b0b..1009b52 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/of_address.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
@@ -39,6 +40,7 @@ struct imx_pinctrl {
 	struct device *dev;
 	struct pinctrl_dev *pctl;
 	void __iomem *base;
+	void __iomem *input_sel_base;
 	const struct imx_pinctrl_soc_info *info;
 };
 
@@ -254,7 +256,12 @@ static int imx_pmx_set(struct pinctrl_dev *pctldev, unsigned selector,
 			 * Regular select input register can never be at offset
 			 * 0, and we only print register value for regular case.
 			 */
-			writel(pin->input_val, ipctl->base + pin->input_reg);
+			if (info->flags & SHARE_INPUT_SELECT_REG)
+				writel(pin->input_val, ipctl->input_sel_base +
+						pin->input_reg);
+			else
+				writel(pin->input_val, ipctl->base +
+						pin->input_reg);
 			dev_dbg(ipctl->dev,
 				"==>select_input: offset 0x%x val 0x%x\n",
 				pin->input_reg, pin->input_val);
@@ -691,6 +698,8 @@ static int imx_pinctrl_probe_dt(struct platform_device *pdev,
 int imx_pinctrl_probe(struct platform_device *pdev,
 		      struct imx_pinctrl_soc_info *info)
 {
+	struct device_node *dev_np = pdev->dev.of_node;
+	struct device_node *np;
 	struct imx_pinctrl *ipctl;
 	struct resource *res;
 	int ret;
@@ -716,6 +725,23 @@ int imx_pinctrl_probe(struct platform_device *pdev,
 	if (IS_ERR(ipctl->base))
 		return PTR_ERR(ipctl->base);
 
+	if (info->flags & SHARE_INPUT_SELECT_REG) {
+		np = of_get_child_by_name(dev_np->parent, "iomuxc");
+		if (np) {
+			ipctl->input_sel_base = of_iomap(np, 0);
+			if (IS_ERR(ipctl->input_sel_base)) {
+				of_node_put(np);
+				dev_err(&pdev->dev,
+				       "iomuxc base address not found\n");
+				return PTR_ERR(ipctl->input_sel_base);
+			}
+		} else {
+			dev_err(&pdev->dev, "iomuxc device node not foud\n");
+			return -EINVAL;
+		}
+		of_node_put(np);
+	}
+
 	imx_pinctrl_desc.name = dev_name(&pdev->dev);
 	imx_pinctrl_desc.pins = info->pins;
 	imx_pinctrl_desc.npins = info->npins;
diff --git a/drivers/pinctrl/freescale/pinctrl-imx.h b/drivers/pinctrl/freescale/pinctrl-imx.h
index d22b8f6..85c701b 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx.h
+++ b/drivers/pinctrl/freescale/pinctrl-imx.h
@@ -85,6 +85,7 @@ struct imx_pinctrl_soc_info {
 
 #define SHARE_MUX_CONF_REG	0x1
 #define ZERO_OFFSET_VALID	0x2
+#define SHARE_INPUT_SELECT_REG	0x4
 
 #define NO_MUX		0x0
 #define NO_PAD		0x0
-- 
2.1.4


  parent reply	other threads:[~2015-08-18 15:48 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-18 15:48 [PATCH 1/8] ARM: imx: imx7d-pinfunc: add gpio1 pad iomux settings Adrian Alonso
2015-08-18 15:48 ` [PATCH 2/8] ARM: dts: imx: imx7d add iomuxc lpsr device node Adrian Alonso
2015-08-18 15:48 ` [PATCH 3/8] ARM: dts: imx: imx7d-sbd add iomuxc-lpsr hoggrp-2 pads Adrian Alonso
2015-08-18 15:48 ` [PATCH 4/8] pinctrl: freescale: imx: add ZERO_OFFSET_VALID flag Adrian Alonso
2015-08-18 15:48 ` Adrian Alonso [this message]
2015-08-19  6:26   ` [PATCH 5/8] pinctrl: freescale: imx: add shared input select reg support Markus Pargmann
2015-08-18 15:48 ` [PATCH 6/8] pinctrl: freescale: imx7d: support iomux lpsr controller Adrian Alonso
2015-08-18 16:02   ` Zhi Li
2015-08-18 15:48 ` [PATCH 7/8] pinctrl: freescale: imx: fix flat functions default return Adrian Alonso
2015-08-19  6:12   ` Markus Pargmann
2015-08-18 15:48 ` [PATCH 8/8] pinctrl: freescale: imx: fix system crash if enable two pinctl instances Adrian Alonso
2015-08-19  6:14   ` Markus Pargmann
2015-08-19  6:51   ` Uwe Kleine-König
2015-08-19  6:18 ` [PATCH 1/8] ARM: imx: imx7d-pinfunc: add gpio1 pad iomux settings Markus Pargmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1439912939-17535-5-git-send-email-aalonso@freescale.com \
    --to=aalonso@freescale.com \
    --cc=Anson.Huang@freescale.com \
    --cc=Frank.Li@freescale.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=lznuaa@gmail.com \
    --cc=nitin.garg@freescale.com \
    --cc=robh+dt@kernel.org \
    --cc=shawn.guo@linaro.org \
    --cc=shawnguo@kernel.org \
    --cc=yibin.gong@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).