devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: kernel@stlinux.com, jassisinghbrar@gmail.com,
	devicetree@vger.kernel.org, Lee Jones <lee.jones@linaro.org>
Subject: [PATCH v3 0/5] Mailbox: Provide support STi based platforms
Date: Wed, 19 Aug 2015 15:22:50 +0100	[thread overview]
Message-ID: <1439994175-13360-1-git-send-email-lee.jones@linaro.org> (raw)

ST's platforms currently support a maximum of 5 Mailboxes, one for
each of the supported co-processors situated on the platform.  Each
Mailbox is divided up into 4 instances which consist of 32 channels.
Messages are passed between the application and co-processors using
shared memory areas.

Also included in the set is an example Client which should be generic
enough to use as a testing environment for all Mailbox IPs which use
shared memory or the API to pass messages.  With small changes, it
should also be able to test more extravagant implementations.

v2 => v3:
 - Controller
   - Shared (DT <=> Device Driver) defines removed
   - Return actual error codes instead of NULL in xlate()
   - Not passing 'direction' configuration via DT anymore
     - Removed all accompanying configuration checking code
 - Test F/W
   - Allow Rx-only and Tx-only controllers to be tested
   - Cater for controllers requiring pre-Tx 'signal' to be sent
   - Supply 'wr-' message debugfs file
     - When written to, will Tx message through Mailbox Framework
     - When read from, will print out a hexdump of Rx'ed message
 
v1 => v2:
 - New MACRO() to obtain base address for a given instance
 - Move locking into the structure it protects
 - Stop checking for 'ready' state when sending data
 - Don't clear channel data (that belongs to the API)
 - #define register offsets instead of providing via pdata
 - Register driver with module_platform_driver()

Lee Jones (5):
  mailbox: dt: Supply bindings for ST's Mailbox IP
  mailbox: Add support for ST's Mailbox IP
  ARM: STi: stih407-family: Add nodes for Mailbox
  mailbox: Add generic mechanism for testing Mailbox Controllers
  ARM: STi: DT: STiH407: Enable Mailbox testing facility

 .../devicetree/bindings/mailbox/sti-mailbox.txt    |  52 +++
 arch/arm/boot/dts/stih407-family.dtsi              |  42 ++
 drivers/mailbox/Kconfig                            |  14 +
 drivers/mailbox/Makefile                           |   4 +
 drivers/mailbox/mailbox-sti.c                      | 516 +++++++++++++++++++++
 drivers/mailbox/mailbox-test.c                     | 361 ++++++++++++++
 6 files changed, 989 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/sti-mailbox.txt
 create mode 100644 drivers/mailbox/mailbox-sti.c
 create mode 100644 drivers/mailbox/mailbox-test.c

-- 
1.9.1

             reply	other threads:[~2015-08-19 14:22 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-19 14:22 Lee Jones [this message]
     [not found] ` <1439994175-13360-1-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-08-19 14:22   ` [PATCH v3 1/5] mailbox: dt: Supply bindings for ST's Mailbox IP Lee Jones
2015-08-19 14:22   ` [PATCH v3 2/5] mailbox: Add support " Lee Jones
2015-10-02  5:11     ` Jassi Brar
     [not found]       ` <CABb+yY2wJKBvL3eceVxkq3ZdS6V+-yqQp98YCaS_oR+3CobQ0g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-10-02  9:32         ` Lee Jones
2015-10-02  9:42           ` Jassi Brar
2015-08-19 14:22 ` [PATCH v3 3/5] ARM: STi: stih407-family: Add nodes for Mailbox Lee Jones
2015-08-19 14:22 ` [PATCH v3 4/5] mailbox: Add generic mechanism for testing Mailbox Controllers Lee Jones
2015-08-19 14:22 ` [PATCH v3 5/5] ARM: STi: DT: STiH407: Enable Mailbox testing facility Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1439994175-13360-1-git-send-email-lee.jones@linaro.org \
    --to=lee.jones@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jassisinghbrar@gmail.com \
    --cc=kernel@stlinux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).