From: Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
robert.jarzmik-GANU6spQydw@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Vaibhav Hiremath
<vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: [PATCH-v5 RESEND 0/5] i2c: pxa: Add support for PXA910 family of device
Date: Mon, 24 Aug 2015 11:29:33 +0530 [thread overview]
Message-ID: <1440395978-9065-1-git-send-email-vaibhav.hiremath@linaro.org> (raw)
Sorry for not following up on this aggressively, was quit busy with some
other stuff. Resending this patch with Robert's Tested-By.
This patch-series is subset of the original patch-series, submitted
on 14 Jul 2015.
Link to Original Patch-series - https://lkml.org/lkml/2015/7/14/80
The first six patches have been already queued up for upstream. So this
patch-series is respin of remaining 5 patches.
Testing:
- Basic testing on PMIC device on I2C-0 interface
- Boot tested on platform based on PXA1928
- Read few registers of PMIC (RTC, ID, etc...) during boot
V4 => V5
=======
Link to V3: https://lkml.org/lkml/2015/7/14/80
- Dropped First 6 patches as they are already accepted, queued for upstream
- Fixed a bug in PATCH [5/5], where for non PXA910 devices it as resulting into
NULL pointer dereference.
For the record, pasting all the details from original patch-series -
V3 => V4
=======
Link to V3: http://www.spinics.net/lists/devicetree/msg85904.html
- [PATCH 06/11] Removed unnecessary dev_err on devm_kzalloc() check
- [PATCH 06/11] Removed return check on platform_get_resource(), as
devm_ioremap_resource() does it for us.
Also, brought up the devm_ioremap_resource() function call in the execution
sequence, as no point in delaying it if we do not have resource.
It make sense, after this change.
- [PATCH 04/11] Typecast changed to 'enum pxa_i2c_types'
Also updated the subject line "Removed ==> Fix"
V2 => V3
=======
Link to V2: http://www.spinics.net/lists/linux-i2c/msg20059.html
- Removed PATCH [4/12] related to reset of I2C module.
Suggested by "Robert Jarzmik"
- Updated commit description for,
PATCH [11/12]: Mentioned reasoning about moment of clk_get code.
PATCH [12/12]: for DT property node.
- Added Acked by "Robert Jarzmik" to patched which he acked.
V1 => V2:
========
Link to V1 - http://lists.infradead.org/pipermail/linux-arm-kernel/2015-May/347012.html
- Fixed all comments from "Robert Jarzmik" and "Wolfram Sang"
- Dropped Patch
05/12: using core bus reset implementation - under work.
08/12: NAKed and dropped
- Separated DT binding patch from driver changes, for easy merge
Vaibhav Hiremath (4):
Documentation: binding: add new property 'disable_after_xfer' to
i2c-pxa
i2c: pxa: Add support for pxa910/988 & new configuration features
Documentation: binding: add sclk adjustment properties to i2c-pxa
i2c: pxa: Add ILCR (tLow & tHigh) configuration support
Yi Zhang (1):
i2c: pxa: enable/disable i2c module across msg xfer
Documentation/devicetree/bindings/i2c/i2c-pxa.txt | 18 +++
drivers/i2c/busses/i2c-pxa.c | 154 ++++++++++++++++++++--
2 files changed, 163 insertions(+), 9 deletions(-)
--
1.9.1
next reply other threads:[~2015-08-24 5:59 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-24 5:59 Vaibhav Hiremath [this message]
2015-08-24 5:59 ` [PATCH-v5 RESEND 1/5] Documentation: binding: add new property 'disable_after_xfer' to i2c-pxa Vaibhav Hiremath
2015-08-24 5:59 ` [PATCH-v5 RESEND 2/5] i2c: pxa: enable/disable i2c module across msg xfer Vaibhav Hiremath
[not found] ` <1440395978-9065-3-git-send-email-vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-09-11 18:53 ` Wolfram Sang
2015-09-14 5:07 ` Vaibhav Hiremath
2015-10-25 8:21 ` Wolfram Sang
2015-08-24 5:59 ` [PATCH-v5 RESEND 3/5] i2c: pxa: Add support for pxa910/988 & new configuration features Vaibhav Hiremath
[not found] ` <1440395978-9065-4-git-send-email-vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-09-11 19:06 ` Wolfram Sang
2015-09-14 5:28 ` Vaibhav Hiremath
2015-10-25 8:40 ` Wolfram Sang
2015-10-25 8:25 ` Wolfram Sang
2015-08-24 5:59 ` [PATCH-v5 RESEND 4/5] Documentation: binding: add sclk adjustment properties to i2c-pxa Vaibhav Hiremath
[not found] ` <1440395978-9065-5-git-send-email-vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-10-25 8:37 ` Wolfram Sang
2015-08-24 5:59 ` [PATCH-v5 RESEND 5/5] i2c: pxa: Add ILCR (tLow & tHigh) configuration support Vaibhav Hiremath
[not found] ` <1440395978-9065-1-git-send-email-vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-09-02 6:47 ` [PATCH-v5 RESEND 0/5] i2c: pxa: Add support for PXA910 family of device Vaibhav Hiremath
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1440395978-9065-1-git-send-email-vaibhav.hiremath@linaro.org \
--to=vaibhav.hiremath-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=robert.jarzmik-GANU6spQydw@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).