From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Ujfalusi Subject: [PATCH 03/11] ARM: DTS: dra7-evm: Rename mmc2_3v3 supply to evm_3v3_sw Date: Mon, 24 Aug 2015 10:19:59 +0300 Message-ID: <1440400807-32274-4-git-send-email-peter.ujfalusi@ti.com> References: <1440400807-32274-1-git-send-email-peter.ujfalusi@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1440400807-32274-1-git-send-email-peter.ujfalusi@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: Tony Lindgren Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, Tero Kristo List-Id: devicetree@vger.kernel.org Use the name for the supply as it is in the schematics since the same supply is used for other peripherals than MMC2, like audio. Signed-off-by: Peter Ujfalusi --- arch/arm/boot/dts/dra7-evm.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index a6c82e5b64fe..de02cf5853a9 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -28,9 +28,9 @@ gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>; }; - mmc2_3v3: fixedregulator-mmc2 { + evm_3v3_sw: fixedregulator-evm_3v3_sw { compatible = "regulator-fixed"; - regulator-name = "mmc2_3v3"; + regulator-name = "evm_3v3_sw"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; @@ -484,7 +484,7 @@ &mmc2 { status = "okay"; - vmmc-supply = <&mmc2_3v3>; + vmmc-supply = <&evm_3v3_sw>; bus-width = <8>; }; -- 2.5.0