From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: [PATCH 1/4] remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver Date: Wed, 26 Aug 2015 14:08:00 +0100 Message-ID: <1440594483-29601-2-git-send-email-lee.jones@linaro.org> References: <1440594483-29601-1-git-send-email-lee.jones@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1440594483-29601-1-git-send-email-lee.jones@linaro.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: ohad@wizery.com, devicetree@vger.kernel.org, Lee Jones , kernel@stlinux.com List-Id: devicetree@vger.kernel.org Signed-off-by: Lee Jones --- .../devicetree/bindings/remoteproc/st-rproc.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/st-rproc.txt diff --git a/Documentation/devicetree/bindings/remoteproc/st-rproc.txt b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt new file mode 100644 index 0000000..6a933c1 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt @@ -0,0 +1,38 @@ +STMicroelectronics Remote Processor +----------------------------------- + +This binding provides support for adjunct processors found on ST SoCs. + +The remote processors can be controlled from the bootloader or the primary OS. +If the bootloader starts a remote processor processor the primary OS must detect +its state and act accordingly. + +The node name is significant, as it defines the name of the CPU and the name +of the firmware to load: "rproc--fw". + +Required properties: +- compatible Should be one of: + "st,st231-rproc" + "st,st40-rproc" +- reg Size and length of reserved co-processor memory +- resets Reset lines (See: ../reset/reset.txt) +- reset-names Must be "sw_reset" and "pwr_reset" +- clocks Clock for co-processor (See: ../clock/clock-bindings.txt) +- clock-names Must be "rproc_clk" +- clock-frequency Clock frequency to set co-processor at if the bootloader + hasn't already done so +- st,syscfg-boot The register that holds the boot vector for the co-processor + +Example: + + st231-audio@bae00000 { + compatible = "st,st231-rproc"; + reg = <0xbae00000 0x01000000>; + reg-names = "rproc_mem"; + resets = <&softreset STIH407_ST231_AUD_SOFTRESET>; + reset-names = "sw_reset"; + clocks = <&clk_s_c0_flexgen CLK_ST231_AUD_0>; + clock-names = "rproc_clk"; + clock-frequency = <600000000>; + st,syscfg-boot = <&syscfg_core 0x228>; + }; -- 1.9.1