devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nathan Sullivan <nathan.sullivan@ni.com>
To: Peter.Chen@freescale.com, robh+dt@kernel.org, pawel.moll@arm.com,
	mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
	galak@codeaurora.org, gregkh@linuxfoundation.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-usb@vger.kernel.org,
	Nathan Sullivan <nathan.sullivan@ni.com>
Subject: [PATCH v2 1/2] usb: chipidea: add xilinx zynq platform data
Date: Mon, 31 Aug 2015 09:49:51 -0500	[thread overview]
Message-ID: <1441032592-8121-1-git-send-email-nathan.sullivan@ni.com> (raw)

Due to having hardware tx buffers less than 512 bytes in size, streaming
must be enabled on the Zynq for the udc to work at all.  Add platform data
specific to the Zynq udc, which does not set the CI_HDRC_DISABLE_STREAMING
flag.

Based on a patch by the same name from the Xilinx vendor tree.

Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
---
Changes from v1 - better describe the issue in the description, the root cause
is that the Zynq hardware does not have big enough tx buffers to hold entire
packets, so streaming must be on.
---
 drivers/usb/chipidea/ci_hdrc_usb2.c |   25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c
index 9eae1a1..4456d2c 100644
--- a/drivers/usb/chipidea/ci_hdrc_usb2.c
+++ b/drivers/usb/chipidea/ci_hdrc_usb2.c
@@ -12,6 +12,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_platform.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/usb/chipidea.h>
@@ -30,18 +31,36 @@ static const struct ci_hdrc_platform_data ci_default_pdata = {
 	.flags		= CI_HDRC_DISABLE_STREAMING,
 };
 
+static struct ci_hdrc_platform_data ci_zynq_pdata = {
+	.capoffset	= DEF_CAPOFFSET,
+};
+
+static const struct of_device_id ci_hdrc_usb2_of_match[] = {
+	{ .compatible = "chipidea,usb2"},
+	{ .compatible = "xlnx,zynq-usb-2.20a", .data = &ci_zynq_pdata},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
+
 static int ci_hdrc_usb2_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct ci_hdrc_usb2_priv *priv;
 	struct ci_hdrc_platform_data *ci_pdata = dev_get_platdata(dev);
 	int ret;
+	const struct of_device_id *match;
 
 	if (!ci_pdata) {
 		ci_pdata = devm_kmalloc(dev, sizeof(*ci_pdata), GFP_KERNEL);
 		*ci_pdata = ci_default_pdata;	/* struct copy */
 	}
 
+	match = of_match_device(ci_hdrc_usb2_of_match, &pdev->dev);
+	if (match && match->data) {
+		/* struct copy */
+		*ci_pdata = *(struct ci_hdrc_platform_data *)match->data;
+	}
+
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
@@ -96,12 +115,6 @@ static int ci_hdrc_usb2_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id ci_hdrc_usb2_of_match[] = {
-	{ .compatible = "chipidea,usb2" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
-
 static struct platform_driver ci_hdrc_usb2_driver = {
 	.probe	= ci_hdrc_usb2_probe,
 	.remove	= ci_hdrc_usb2_remove,
-- 
1.7.10.4

             reply	other threads:[~2015-08-31 14:49 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-31 14:49 Nathan Sullivan [this message]
2015-08-31 14:49 ` [PATCH v2 2/2] Documentation: bindings: add doc for zynq USB Nathan Sullivan
     [not found] ` <1441032592-8121-1-git-send-email-nathan.sullivan-acOepvfBmUk@public.gmane.org>
2015-09-01  0:55   ` [PATCH v2 1/2] usb: chipidea: add xilinx zynq platform data Peter Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1441032592-8121-1-git-send-email-nathan.sullivan@ni.com \
    --to=nathan.sullivan@ni.com \
    --cc=Peter.Chen@freescale.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).