[PATCH 08/13] power: bq24257: Extend scope of mutex protection

[Andreas Dannenberg <dannenberg@ti.com>]

This commit extends the use of the existing mutex to pave the way for
using direct device access inside sysfs getter/setter routines in a
way that the access during interrupts and timer routines does not
interfere with device access by the CPU or between multiple cores.

This also addresses a potential race condition that could be caused
by bq24257_irq_handler_thread() and bq24257_iilimit_autoset() accessing
the device simultaneously.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
---
 drivers/power/bq24257_charger.c | 60 ++++++++++++++++++++++++-----------------
 1 file changed, 35 insertions(+), 25 deletions(-)

diff --git a/drivers/power/bq24257_charger.c b/drivers/power/bq24257_charger.c
index 2271a88..ad3fd2d 100644
--- a/drivers/power/bq24257_charger.c
+++ b/drivers/power/bq24257_charger.c
@@ -99,7 +99,7 @@ struct bq24257_device {
 	struct bq24257_init_data init_data;
 	struct bq24257_state state;
 
-	struct mutex lock; /* protect state data */
+	struct mutex lock; /* protect device access and state data */
 
 	bool in_ilimit_autoset_disable;
 	bool pg_gpio_disable;
@@ -268,10 +268,10 @@ static int bq24257_power_supply_get_property(struct power_supply *psy,
 {
 	struct bq24257_device *bq = power_supply_get_drvdata(psy);
 	struct bq24257_state state;
+	int ret = 0;
 
 	mutex_lock(&bq->lock);
 	state = bq->state;
-	mutex_unlock(&bq->lock);
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_STATUS:
@@ -351,10 +351,12 @@ static int bq24257_power_supply_get_property(struct power_supply *psy,
 		break;
 
 	default:
-		return -EINVAL;
+		ret = -EINVAL;
 	}
 
-	return 0;
+	mutex_unlock(&bq->lock);
+
+	return ret;
 }
 
 static int bq24257_get_chip_state(struct bq24257_device *bq,
@@ -401,15 +403,9 @@ static int bq24257_get_chip_state(struct bq24257_device *bq,
 static bool bq24257_state_changed(struct bq24257_device *bq,
 				  struct bq24257_state *new_state)
 {
-	int ret;
-
-	mutex_lock(&bq->lock);
-	ret = (bq->state.status != new_state->status ||
-	       bq->state.fault != new_state->fault ||
-	       bq->state.power_good != new_state->power_good);
-	mutex_unlock(&bq->lock);
-
-	return ret;
+	return bq->state.status != new_state->status ||
+			bq->state.fault != new_state->fault ||
+			bq->state.power_good != new_state->power_good;
 }
 
 enum bq24257_loop_status {
@@ -532,7 +528,9 @@ static void bq24257_iilimit_setup_work(struct work_struct *work)
 	struct bq24257_device *bq = container_of(work, struct bq24257_device,
 						 iilimit_setup_work.work);
 
+	mutex_lock(&bq->lock);
 	bq24257_iilimit_autoset(bq);
+	mutex_unlock(&bq->lock);
 }
 
 static void bq24257_handle_state_change(struct bq24257_device *bq,
@@ -543,9 +541,7 @@ static void bq24257_handle_state_change(struct bq24257_device *bq,
 	bool reset_iilimit = false;
 	bool config_iilimit = false;
 
-	mutex_lock(&bq->lock);
 	old_state = bq->state;
-	mutex_unlock(&bq->lock);
 
 	/*
 	 * Handle BQ2425x state changes observing whether the D+/D- based input
@@ -600,25 +596,30 @@ static irqreturn_t bq24257_irq_handler_thread(int irq, void *private)
 	struct bq24257_device *bq = private;
 	struct bq24257_state state;
 
+	mutex_lock(&bq->lock);
+
 	ret = bq24257_get_chip_state(bq, &state);
 	if (ret < 0)
-		return IRQ_HANDLED;
+		goto out;
 
 	if (!bq24257_state_changed(bq, &state))
-		return IRQ_HANDLED;
+		goto out;
 
 	dev_dbg(bq->dev, "irq(state changed): status/fault/pg = %d/%d/%d\n",
 		state.status, state.fault, state.power_good);
 
 	bq24257_handle_state_change(bq, &state);
-
-	mutex_lock(&bq->lock);
 	bq->state = state;
+
 	mutex_unlock(&bq->lock);
 
 	power_supply_changed(bq->charger);
 
 	return IRQ_HANDLED;
+
+out:
+	mutex_unlock(&bq->lock);
+	return IRQ_HANDLED;
 }
 
 static int bq24257_hw_init(struct bq24257_device *bq)
@@ -658,9 +659,7 @@ static int bq24257_hw_init(struct bq24257_device *bq)
 	if (ret < 0)
 		return ret;
 
-	mutex_lock(&bq->lock);
 	bq->state = state;
-	mutex_unlock(&bq->lock);
 
 	if (bq->in_ilimit_autoset_disable) {
 		dev_dbg(bq->dev, "manually setting iilimit = %d\n",
@@ -1002,11 +1001,15 @@ static int bq24257_suspend(struct device *dev)
 	if (!bq->in_ilimit_autoset_disable)
 		cancel_delayed_work_sync(&bq->iilimit_setup_work);
 
+	mutex_lock(&bq->lock);
+
 	/* reset all registers to default (and activate standalone mode) */
 	ret = bq24257_field_write(bq, F_RESET, 1);
 	if (ret < 0)
 		dev_err(bq->dev, "Cannot reset chip to standalone mode.\n");
 
+	mutex_unlock(&bq->lock);
+
 	return ret;
 }
 
@@ -1015,24 +1018,31 @@ static int bq24257_resume(struct device *dev)
 	int ret;
 	struct bq24257_device *bq = dev_get_drvdata(dev);
 
+	mutex_lock(&bq->lock);
+
 	ret = regcache_drop_region(bq->rmap, BQ24257_REG_1, BQ24257_REG_7);
 	if (ret < 0)
-		return ret;
+		goto err;
 
 	ret = bq24257_field_write(bq, F_RESET, 0);
 	if (ret < 0)
-		return ret;
+		goto err;
 
 	ret = bq24257_hw_init(bq);
 	if (ret < 0) {
 		dev_err(bq->dev, "Cannot init chip after resume.\n");
-		return ret;
+		goto err;
 	}
 
+	mutex_unlock(&bq->lock);
+
 	/* signal userspace, maybe state changed while suspended */
 	power_supply_changed(bq->charger);
-
 	return 0;
+
+err:
+	mutex_unlock(&bq->lock);
+	return ret;
 }
 #endif
 
-- 
1.9.1