[PATCH v5 6/8] scsi: ufs: make the UFS variant a platform device

[PATCH v5 6/8] scsi: ufs: make the UFS variant a platform device

[Yaniv Gardi]

This change turns the UFS variant (SCSI_UFS_QCOM) into a UFS
a platform device.
In order to do so a few additional changes are required:
1. The ufshcd-pltfrm is no longer serves as a platform device.
   Now it only serves as a group of platform APIs such as PM APIs
   (runtime suspend/resume, system suspend/resume etc), parsers of
   clocks, regulators and pm_levels from DT.
2. What used to be the old platform "probe" is now "only"
   a pltfrm_init() routine, that does exactly the same, but only
   being called by the new probe function of the UFS variant.

Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>

---
 Documentation/devicetree/bindings/ufs/ufs-qcom.txt | 57 ++++++++++++++
 .../devicetree/bindings/ufs/ufshcd-pltfrm.txt      |  4 +-
 drivers/scsi/ufs/ufs-qcom.c                        | 74 ++++++++++++++++-
 drivers/scsi/ufs/ufshcd-pltfrm.c                   | 92 ++++++----------------
 drivers/scsi/ufs/ufshcd-pltfrm.h                   | 41 ++++++++++
 drivers/scsi/ufs/ufshcd.c                          | 10 +++
 drivers/scsi/ufs/ufshcd.h                          |  1 +
 7 files changed, 207 insertions(+), 72 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/ufs/ufs-qcom.txt
 create mode 100644 drivers/scsi/ufs/ufshcd-pltfrm.h

diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
new file mode 100644
index 0000000..452e4ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
@@ -0,0 +1,57 @@
+* Qualcomm Technologies Inc Universal Flash Storage (UFS) PHY
+
+UFSPHY nodes are defined to describe on-chip UFS PHY hardware macro.
+Each UFS PHY node should have its own node.
+
+To bind UFS PHY with UFS host controller, the controller node should
+contain a phandle reference to UFS PHY node.
+
+Required properties:
+- compatible        : compatible list, contains "qcom,ufs-phy-qmp-20nm"
+		      or "qcom,ufs-phy-qmp-14nm" according to the relevant phy in use.
+- reg               : should contain PHY register address space (mandatory),
+- reg-names         : indicates various resources passed to driver (via reg proptery) by name.
+                      Required "reg-names" is "phy_mem".
+- #phy-cells        : This property shall be set to 0
+- vdda-phy-supply   : phandle to main PHY supply for analog domain
+- vdda-pll-supply   : phandle to PHY PLL and Power-Gen block power supply
+- clocks	    : List of phandle and clock specifier pairs
+- clock-names       : List of clock input name strings sorted in the same
+		      order as the clocks property. "ref_clk_src", "ref_clk",
+		      "tx_iface_clk" & "rx_iface_clk" are mandatory but
+		      "ref_clk_parent" is optional
+
+Optional properties:
+- vdda-phy-max-microamp : specifies max. load that can be drawn from phy supply
+- vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply
+- vddp-ref-clk-supply   : phandle to UFS device ref_clk pad power supply
+- vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply
+- vddp-ref-clk-always-on : specifies if this supply needs to be kept always on
+
+Example:
+
+	ufsphy1: ufsphy@0xfc597000 {
+		compatible = "qcom,ufs-phy-qmp-20nm";
+		reg = <0xfc597000 0x800>;
+		reg-names = "phy_mem";
+		#phy-cells = <0>;
+		vdda-phy-supply = <&pma8084_l4>;
+		vdda-pll-supply = <&pma8084_l12>;
+		vdda-phy-max-microamp = <50000>;
+		vdda-pll-max-microamp = <1000>;
+		clock-names = "ref_clk_src",
+			"ref_clk_parent",
+			"ref_clk",
+			"tx_iface_clk",
+			"rx_iface_clk";
+		clocks = <&clock_rpm clk_ln_bb_clk>,
+			<&clock_gcc clk_pcie_1_phy_ldo >,
+			<&clock_gcc clk_ufs_phy_ldo>,
+			<&clock_gcc clk_gcc_ufs_tx_cfg_clk>,
+			<&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
+	};
+
+	ufshc@0xfc598000 {
+		...
+		phys = <&ufsphy1>;
+	};
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index 5357919..c0f10d3 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -4,7 +4,9 @@ UFSHC nodes are defined to describe on-chip UFS host controllers.
 Each UFS controller instance should have its own node.
 
 Required properties:
-- compatible        : compatible list, contains "jedec,ufs-1.1"
+- compatible        : compatible list, contains "jedec,ufs-1.1" or
+		      "qcom,msm8994-ufshc" or "qcom,msm8996-ufshc"
+		      followed by "qcom,ufshc"
 - interrupts        : <interrupt mapping for UFS host controller IRQ>
 - reg               : <registers mapping>
 
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 329ac84..5179250 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -19,6 +19,7 @@
 
 #include <linux/phy/phy-qcom-ufs.h>
 #include "ufshcd.h"
+#include "ufshcd-pltfrm.h"
 #include "unipro.h"
 #include "ufs-qcom.h"
 #include "ufshci.h"
@@ -1036,7 +1037,7 @@ void ufs_qcom_clk_scale_notify(struct ufs_hba *hba)
  * The variant operations configure the necessary controller and PHY
  * handshake during initialization.
  */
-static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
+static struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
 	.name                   = "qcom",
 	.init                   = ufs_qcom_init,
 	.exit                   = ufs_qcom_exit,
@@ -1050,4 +1051,75 @@ static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
 	.resume			= ufs_qcom_resume,
 };
 
+/**
+ * ufs_qcom_probe - probe routine of the driver
+ * @pdev: pointer to Platform device handle
+ *
+ * Always return 0
+ */
+static int ufs_qcom_probe(struct platform_device *pdev)
+{
+	int err;
+	struct device *dev = &pdev->dev;
+	struct ufs_hba *hba;
+
+	/* Perform generic probe */
+	err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops);
+	if (err) {
+		dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err);
+		goto out;
+	}
+
+	hba = platform_get_drvdata(pdev);
+
+	return 0;
+
+dealloc_host:
+	/* disconnect the bind between the qcom host and the hba */
+	ufshcd_set_variant(hba, NULL);
+	ufshcd_dealloc_host(hba);
+out:
+	return err;
+}
+
+/**
+ * ufs_qcom_remove - set driver_data of the device to NULL
+ * @pdev: pointer to platform device handle
+ *
+ * Always return 0
+ */
+static int ufs_qcom_remove(struct platform_device *pdev)
+{
+	struct ufs_hba *hba =  platform_get_drvdata(pdev);
+
+	pm_runtime_get_sync(&(pdev)->dev);
+	ufshcd_remove(hba);
+	return 0;
+}
+
+static const struct of_device_id ufs_qcom_of_match[] = {
+	{ .compatible = "qcom,ufshc"},
+	{},
+};
+
+static const struct dev_pm_ops ufs_qcom_pm_ops = {
+	.suspend	= ufshcd_pltfrm_suspend,
+	.resume		= ufshcd_pltfrm_resume,
+	.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
+	.runtime_resume  = ufshcd_pltfrm_runtime_resume,
+	.runtime_idle    = ufshcd_pltfrm_runtime_idle,
+};
+
+static struct platform_driver ufs_qcom_pltform = {
+	.probe	= ufs_qcom_probe,
+	.remove	= ufs_qcom_remove,
+	.shutdown = ufshcd_pltfrm_shutdown,
+	.driver	= {
+		.name	= "ufshcd-qcom",
+		.pm	= &ufs_qcom_pm_ops,
+		.of_match_table = of_match_ptr(ufs_qcom_of_match),
+	},
+};
+module_platform_driver(ufs_qcom_pltform);
+
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 7db9564..8eafcfa 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -38,20 +38,7 @@
 #include <linux/of.h>
 
 #include "ufshcd.h"
-
-static const struct of_device_id ufs_of_match[];
-static struct ufs_hba_variant_ops *get_variant_ops(struct device *dev)
-{
-	if (dev->of_node) {
-		const struct of_device_id *match;
-
-		match = of_match_node(ufs_of_match, dev->of_node);
-		if (match)
-			return (struct ufs_hba_variant_ops *)match->data;
-	}
-
-	return NULL;
-}
+#include "ufshcd-pltfrm.h"
 
 static int ufshcd_parse_clock_info(struct ufs_hba *hba)
 {
@@ -245,10 +232,11 @@ out:
  * Returns 0 if successful
  * Returns non-zero otherwise
  */
-static int ufshcd_pltfrm_suspend(struct device *dev)
+int ufshcd_pltfrm_suspend(struct device *dev)
 {
 	return ufshcd_system_suspend(dev_get_drvdata(dev));
 }
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_suspend);
 
 /**
  * ufshcd_pltfrm_resume - resume power management function
@@ -257,43 +245,47 @@ static int ufshcd_pltfrm_suspend(struct device *dev)
  * Returns 0 if successful
  * Returns non-zero otherwise
  */
-static int ufshcd_pltfrm_resume(struct device *dev)
+int ufshcd_pltfrm_resume(struct device *dev)
 {
 	return ufshcd_system_resume(dev_get_drvdata(dev));
 }
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_resume);
 
-static int ufshcd_pltfrm_runtime_suspend(struct device *dev)
+int ufshcd_pltfrm_runtime_suspend(struct device *dev)
 {
 	return ufshcd_runtime_suspend(dev_get_drvdata(dev));
 }
-static int ufshcd_pltfrm_runtime_resume(struct device *dev)
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_suspend);
+
+int ufshcd_pltfrm_runtime_resume(struct device *dev)
 {
 	return ufshcd_runtime_resume(dev_get_drvdata(dev));
 }
-static int ufshcd_pltfrm_runtime_idle(struct device *dev)
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_resume);
+
+int ufshcd_pltfrm_runtime_idle(struct device *dev)
 {
 	return ufshcd_runtime_idle(dev_get_drvdata(dev));
 }
-#else /* !CONFIG_PM */
-#define ufshcd_pltfrm_suspend	NULL
-#define ufshcd_pltfrm_resume	NULL
-#define ufshcd_pltfrm_runtime_suspend	NULL
-#define ufshcd_pltfrm_runtime_resume	NULL
-#define ufshcd_pltfrm_runtime_idle	NULL
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_idle);
+
 #endif /* CONFIG_PM */
 
-static void ufshcd_pltfrm_shutdown(struct platform_device *pdev)
+void ufshcd_pltfrm_shutdown(struct platform_device *pdev)
 {
 	ufshcd_shutdown((struct ufs_hba *)platform_get_drvdata(pdev));
 }
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_shutdown);
 
 /**
- * ufshcd_pltfrm_probe - probe routine of the driver
+ * ufshcd_pltfrm_init - probe routine of the driver
  * @pdev: pointer to Platform device handle
+ * @vops: pointer to variant ops
  *
  * Returns 0 on success, non-zero value on failure
  */
-static int ufshcd_pltfrm_probe(struct platform_device *pdev)
+int ufshcd_pltfrm_init(struct platform_device *pdev,
+		       struct ufs_hba_variant_ops *vops)
 {
 	struct ufs_hba *hba;
 	void __iomem *mmio_base;
@@ -321,7 +313,7 @@ static int ufshcd_pltfrm_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	hba->vops = get_variant_ops(&pdev->dev);
+	hba->vops = vops;
 
 	err = ufshcd_parse_clock_info(hba);
 	if (err) {
@@ -355,47 +347,7 @@ out_disable_rpm:
 out:
 	return err;
 }
-
-/**
- * ufshcd_pltfrm_remove - remove platform driver routine
- * @pdev: pointer to platform device handle
- *
- * Returns 0 on success, non-zero value on failure
- */
-static int ufshcd_pltfrm_remove(struct platform_device *pdev)
-{
-	struct ufs_hba *hba =  platform_get_drvdata(pdev);
-
-	pm_runtime_get_sync(&(pdev)->dev);
-	ufshcd_remove(hba);
-	return 0;
-}
-
-static const struct of_device_id ufs_of_match[] = {
-	{ .compatible = "jedec,ufs-1.1"},
-	{},
-};
-
-static const struct dev_pm_ops ufshcd_dev_pm_ops = {
-	.suspend	= ufshcd_pltfrm_suspend,
-	.resume		= ufshcd_pltfrm_resume,
-	.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
-	.runtime_resume  = ufshcd_pltfrm_runtime_resume,
-	.runtime_idle    = ufshcd_pltfrm_runtime_idle,
-};
-
-static struct platform_driver ufshcd_pltfrm_driver = {
-	.probe	= ufshcd_pltfrm_probe,
-	.remove	= ufshcd_pltfrm_remove,
-	.shutdown = ufshcd_pltfrm_shutdown,
-	.driver	= {
-		.name	= "ufshcd",
-		.pm	= &ufshcd_dev_pm_ops,
-		.of_match_table = ufs_of_match,
-	},
-};
-
-module_platform_driver(ufshcd_pltfrm_driver);
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_init);
 
 MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
 MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.h b/drivers/scsi/ufs/ufshcd-pltfrm.h
new file mode 100644
index 0000000..df64c41
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.h
@@ -0,0 +1,41 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFSHCD_PLTFRM_H_
+#define UFSHCD_PLTFRM_H_
+
+#include "ufshcd.h"
+
+int ufshcd_pltfrm_init(struct platform_device *pdev,
+		       struct ufs_hba_variant_ops *vops);
+void ufshcd_pltfrm_shutdown(struct platform_device *pdev);
+
+#ifdef CONFIG_PM
+
+int ufshcd_pltfrm_suspend(struct device *dev);
+int ufshcd_pltfrm_resume(struct device *dev);
+int ufshcd_pltfrm_runtime_suspend(struct device *dev);
+int ufshcd_pltfrm_runtime_resume(struct device *dev);
+int ufshcd_pltfrm_runtime_idle(struct device *dev);
+
+#else /* !CONFIG_PM */
+
+#define ufshcd_pltfrm_suspend	NULL
+#define ufshcd_pltfrm_resume	NULL
+#define ufshcd_pltfrm_runtime_suspend	NULL
+#define ufshcd_pltfrm_runtime_resume	NULL
+#define ufshcd_pltfrm_runtime_idle	NULL
+
+#endif /* CONFIG_PM */
+
+#endif /* UFSHCD_PLTFRM_H_ */
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 9e79c33..2ef9834 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -5348,6 +5348,16 @@ void ufshcd_remove(struct ufs_hba *hba)
 EXPORT_SYMBOL_GPL(ufshcd_remove);
 
 /**
+ * ufshcd_dealloc_host - deallocate Host Bus Adapter (HBA)
+ * @hba: pointer to Host Bus Adapter (HBA)
+ */
+void ufshcd_dealloc_host(struct ufs_hba *hba)
+{
+	scsi_host_put(hba->host);
+}
+EXPORT_SYMBOL_GPL(ufshcd_dealloc_host);
+
+/**
  * ufshcd_set_dma_mask - Set dma mask based on the controller
  *			 addressing capability
  * @hba: per adapter instance
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index ce75626..f2aa47e 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -576,6 +576,7 @@ static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg)
 }
 
 int ufshcd_alloc_host(struct device *, struct ufs_hba **);
+void ufshcd_dealloc_host(struct ufs_hba *);
 int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int);
 void ufshcd_remove(struct ufs_hba *);
 
-- 
1.8.5.2

-- 
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH v5 6/8] scsi: ufs: make the UFS variant a platform device

[Rob Herring]

On Wed, Sep 2, 2015 at 3:32 AM, Yaniv Gardi <ygardi@codeaurora.org> wrote:
> This change turns the UFS variant (SCSI_UFS_QCOM) into a UFS
> a platform device.
> In order to do so a few additional changes are required:
> 1. The ufshcd-pltfrm is no longer serves as a platform device.
>    Now it only serves as a group of platform APIs such as PM APIs
>    (runtime suspend/resume, system suspend/resume etc), parsers of
>    clocks, regulators and pm_levels from DT.
> 2. What used to be the old platform "probe" is now "only"
>    a pltfrm_init() routine, that does exactly the same, but only
>    being called by the new probe function of the UFS variant.
>
> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>

[...]

> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index 329ac84..5179250 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -19,6 +19,7 @@
>
>  #include <linux/phy/phy-qcom-ufs.h>
>  #include "ufshcd.h"
> +#include "ufshcd-pltfrm.h"
>  #include "unipro.h"
>  #include "ufs-qcom.h"
>  #include "ufshci.h"
> @@ -1036,7 +1037,7 @@ void ufs_qcom_clk_scale_notify(struct ufs_hba *hba)
>   * The variant operations configure the necessary controller and PHY
>   * handshake during initialization.
>   */
> -static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
> +static struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
>         .name                   = "qcom",
>         .init                   = ufs_qcom_init,
>         .exit                   = ufs_qcom_exit,
> @@ -1050,4 +1051,75 @@ static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
>         .resume                 = ufs_qcom_resume,
>  };
>
> +/**
> + * ufs_qcom_probe - probe routine of the driver
> + * @pdev: pointer to Platform device handle
> + *
> + * Always return 0
> + */
> +static int ufs_qcom_probe(struct platform_device *pdev)
> +{
> +       int err;
> +       struct device *dev = &pdev->dev;
> +       struct ufs_hba *hba;
> +
> +       /* Perform generic probe */
> +       err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops);
> +       if (err) {
> +               dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err);
> +               goto out;
> +       }
> +

All of this:

> +       hba = platform_get_drvdata(pdev);
> +
> +       return 0;
> +
> +dealloc_host:
> +       /* disconnect the bind between the qcom host and the hba */
> +       ufshcd_set_variant(hba, NULL);
> +       ufshcd_dealloc_host(hba);

To this is dead code. You should get a warning that dealloc_host is
unused. Please check and fix all warnings.

Rob

> +out:
> +       return err;
> +}
> +

Re: [PATCH v5 6/8] scsi: ufs: make the UFS variant a platform device

[ygardi]

> On Wed, Sep 2, 2015 at 3:32 AM, Yaniv Gardi <ygardi@codeaurora.org> wrote:
>> This change turns the UFS variant (SCSI_UFS_QCOM) into a UFS
>> a platform device.
>> In order to do so a few additional changes are required:
>> 1. The ufshcd-pltfrm is no longer serves as a platform device.
>>    Now it only serves as a group of platform APIs such as PM APIs
>>    (runtime suspend/resume, system suspend/resume etc), parsers of
>>    clocks, regulators and pm_levels from DT.
>> 2. What used to be the old platform "probe" is now "only"
>>    a pltfrm_init() routine, that does exactly the same, but only
>>    being called by the new probe function of the UFS variant.
>>
>> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
>
> [...]
>
>> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
>> index 329ac84..5179250 100644
>> --- a/drivers/scsi/ufs/ufs-qcom.c
>> +++ b/drivers/scsi/ufs/ufs-qcom.c
>> @@ -19,6 +19,7 @@
>>
>>  #include <linux/phy/phy-qcom-ufs.h>
>>  #include "ufshcd.h"
>> +#include "ufshcd-pltfrm.h"
>>  #include "unipro.h"
>>  #include "ufs-qcom.h"
>>  #include "ufshci.h"
>> @@ -1036,7 +1037,7 @@ void ufs_qcom_clk_scale_notify(struct ufs_hba
>> *hba)
>>   * The variant operations configure the necessary controller and PHY
>>   * handshake during initialization.
>>   */
>> -static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
>> +static struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
>>         .name                   = "qcom",
>>         .init                   = ufs_qcom_init,
>>         .exit                   = ufs_qcom_exit,
>> @@ -1050,4 +1051,75 @@ static const struct ufs_hba_variant_ops
>> ufs_hba_qcom_vops = {
>>         .resume                 = ufs_qcom_resume,
>>  };
>>
>> +/**
>> + * ufs_qcom_probe - probe routine of the driver
>> + * @pdev: pointer to Platform device handle
>> + *
>> + * Always return 0
>> + */
>> +static int ufs_qcom_probe(struct platform_device *pdev)
>> +{
>> +       int err;
>> +       struct device *dev = &pdev->dev;
>> +       struct ufs_hba *hba;
>> +
>> +       /* Perform generic probe */
>> +       err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops);
>> +       if (err) {
>> +               dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err);
>> +               goto out;
>> +       }
>> +
>
> All of this:
>
>> +       hba = platform_get_drvdata(pdev);
>> +
>> +       return 0;
>> +
>> +dealloc_host:
>> +       /* disconnect the bind between the qcom host and the hba */
>> +       ufshcd_set_variant(hba, NULL);
>> +       ufshcd_dealloc_host(hba);
>
> To this is dead code. You should get a warning that dealloc_host is
> unused. Please check and fix all warnings.
>
> Rob
>

correct. V7 has taken care of that.
thanks,
Yaniv

>> +out:
>> +       return err;
>> +}
>> +
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>