From mboxrd@z Thu Jan 1 00:00:00 1970 From: kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org Subject: [PATCH v5 6/6] dt/bindings: bcm2835: Add binding documentation for auxiliar spi devices Date: Fri, 4 Sep 2015 09:41:50 +0000 Message-ID: <1441359711-2800-7-git-send-email-kernel@martin.sperl.org> References: <1441359711-2800-1-git-send-email-kernel@martin.sperl.org> Return-path: In-Reply-To: <1441359711-2800-1-git-send-email-kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org> Sender: linux-spi-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Stephen Warren , Lee Jones , Russell King , Mark Brown , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Martin Sperl List-Id: devicetree@vger.kernel.org From: Martin Sperl add binding documentation Signed-off-by: Martin Sperl --- .../bindings/spi/brcm,bcm2835-aux-spi.txt | 47 ++++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt Changelog: v4->v5: fixed wording for reg removed reference to syscon removed documentation on typical GPIO config diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt new file mode 100644 index 0000000..3ade499 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt @@ -0,0 +1,47 @@ +Broadcom BCM2835 auxiliar SPI1/2 controller + +The BCM2835 contains two forms of SPI master controller, one known simply as +SPI0, and the other known as the "Universal SPI Master"; part of the +auxiliary block. This binding applies to the SPI1/2 controller. + +Required properties: +- compatible: Should be "brcm,bcm2835-aux-spi". +- reg: Should contain register location and length for the spi block +- interrupts: Should contain shared interrupt of the aux block +- clocks: The clock feeding the SPI controller. +- cs-gpios: the cs-gpios (native cs is NOT supported) + see also spi-bus.txt +- bcrm,aux-enable: the bcrm,bcm2835-aux-enable config entry to handle + enabling/disabling of the spi1/spi2/uart1 HW block + second "argument" is the mask to apply to the + enable register + +Example: + +spi1@7e215080 { + compatible = "brcm,bcm2835-aux-spi"; + reg = <0x7e215080 0x40>; + interrupts = <1 29>; + clocks = <&clk_spi>; + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&gpio 18>, <&gpio 17>, <&gpio 16>; + bcrm,aux-enable = <&aux_enable 2>; +}; + +spi2@7e2150c0 { + compatible = "brcm,bcm2835-aux-spi"; + reg = <0x7e2150c0 0x40>; + interrupts = <1 29>; + clocks = <&clk_spi>; + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&gpio 43>, <&gpio 44>, <&gpio 45>; + bcrm,aux-enable = <&aux_enable 4>; +}; + +/* the necessary bcm2835 aux-enable referenced above */ +aux_enable: aux_enable@0x7e215004 { + compatible = "bcrm,bcm2835-aux"; + reg = <0x7e215004 0x04>; +}; -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html